Edelbrock 4779 Manual de usuario

Catalog #4779

Rev.10/05 - RS/mc

Brochure #63-0463

Page 1 of 2

SECONDARY FUEL RAIL

For B-Series Honda Performer X Intake Manifolds

Catalog #4779

INSTALLATION INSTRUCTIONS

PLEASE study these instructions carefully before beginning this installation. Most installations can be accomplished with common tools and

procedures. However, you should be familiar with and comfortable working on your vehicle. If you do not feel comfortable performing this

installation, it is recommended to have the installation completed by a qualified mechanic. If you have any questions, please call our Technical

Hotline at: 1-800-416-8628, 7:00 am - 5:00 pm, Pacific Standard Time, Monday through Friday or e-mail us at [email protected].

NOTE: Proper installation is the responsibility of the installer. Improper installation may result in poor performance and engine or vehicle damage.

PLEASE complete and mail your warranty card. Be sure to write the model number of this product in the "Part #____" space. THANK YOU.

•Description: The Edelbrock Secondary Fuel Rail kit for the Performer X intake manifold allows the use of secondary fuel injectors on

Performer X manifolds, 4771, 4774, and 4778, for turbocharged, alcohol-fueled, or nitrous oxide applications, where additional injectors are

needed. Performer X manifolds must use PICO-style secondary fuel injectors.

Kit Contents:

❑ 1 Secondary fuel rail

❑2 1/4-20 x 1.25” bolts

❑2 1/4” AN washer

❑2 1/4” Star washer

❑2 3/8” NPT x -6 AN Adapter fittings

•NOTE: If the intake manifold is on the engine, it must be removed before attempting to install the Secondary Fuel Rail. Drilling

of the injector bosses is required, and metal chips could get into the engine if intake manifold is not removed prior to drilling.

Refer to your intake manifold installation instructions, or your factory service manual for proper removal procedure.

•WARNING: When working around gasoline or with any fuel system, always work in a well-ventilated area. Keep all sparks,

open flames, or other sources of ignition away from the work area. Failure to do so could result in a fire or explosion causing

vehicle or property damage, personal injury, and/or death.

• INJECTORS: Performer X intake manifolds require the use of a

Pico-style

fuel injector

(See Fig. 1)

. See chart below for recommended

Edelbrock fuel injectors. Select the size that is appropriate for your particular application.

FUEL INJECTOR DESCRIPTION

#3574 19 lbs/hour @ 44 psi (185cc/min)

#3583 29 lbs/hour @ 44 psi (281cc/min)

#3635 35 lbs/hour @ 44 psi (340cc/min)

#3685 44 lbs/hour @ 44 psi (427cc/min)

Figure 1 - Pico-Style Fuel Injector

Catalog #4779

Rev.10/05 - RS/mc

Brochure #63-0463

Page 2 of 2

Edelbrock Corporation • 2700 California St. • Torrance, CA 90503

Tech-Line: 800-416-8628 • E-Mail: [email protected]

INSTALLATION PROCEDURE

1. Support and secure the intake manifold properly in a drill

press or on a work bench to allow a straight drill path to the

injector bosses

(See Fig. 2 for reference)

2. Using a 7/16” drill bit, drill through the blind holes in the

injector bosses.

Warning: Use caution as the drill may tend to kick back

as it breaks through to the intake manifold runners.

Warning: Be careful not to damage the o-ring sealing

surface when drilling the injector bosses.

4. Insert the appropriate injectors for your application into the

intake manifold.

5. Press the fuel rail onto the injectors. Using a fuel system safe

lubricant on the o-rings will help make this easier.

6. Bolt the fuel rail to the Performer-X intake manifold using the

supplied 1/4-20x1-1/4” bolts and the supplied washers.

7. Apply a fuel system safe thread sealant to the threads of the

3/8”NPTx-6AN adapters and install them into the ends of the

fuel rail.

Note: You may also use any adapter fitting with 3/8”NPT

threads, if it is more suitable to your fuel system. Also, be sure

to allow the sealant to cure completely before allowing fuel

through the fuel rail. Fittings may also be installed before

mounting fuel rail onto the intake manifold. Make sure to

secure the fuel rail in a soft jaw bench vise.

Fig. 2 - Reference Dimensions

7/16” Dia.

20° (4771)

23° (4774 & 4778)

1/4-20

(Coarse Thread)

Tabla de contenidos

Otros manuales de Pieza de automóvil de Edelbrock

Edelbrock

Edelbrock Performer 1670 Manual de usuario

Edelbrock

Edelbrock 5726 Manual de usuario

Edelbrock

Edelbrock 66062 Manual de usuario

Edelbrock

Edelbrock Honda TRX300EX Manual del propietario

Edelbrock

Edelbrock 1472 Manual de usuario

Edelbrock

Edelbrock 65172 Manual de usuario

Edelbrock

Edelbrock 2001 PT Cruiser Manual de usuario

Edelbrock

Edelbrock 2994 Manual de usuario

Edelbrock

Edelbrock 67362 Manual de usuario

Edelbrock

Edelbrock Quiet-Flo 1790 Manual de usuario

Edelbrock

Edelbrock Torker 2930 Manual de usuario

Edelbrock

Edelbrock 5756 Manual de usuario

Edelbrock

Edelbrock 5734 Manual de usuario

Edelbrock

Edelbrock 262-400 Manual de usuario

Edelbrock

Edelbrock Performer-Plus 2132 Manual de instrucciones

Edelbrock

Edelbrock 5721 Manual de usuario

Edelbrock

Edelbrock 5716 Manual de usuario

Edelbrock

Edelbrock 25-9492 Manual de usuario

Edelbrock

Edelbrock Torker II 5021 Manual de usuario

Edelbrock

Edelbrock 68003 Manual de usuario

Edelbrock

Edelbrock 7107 Manual de usuario

Edelbrock

Edelbrock 6502 Manual de usuario

Edelbrock

Edelbrock Performer IAS Manual de usuario

Edelbrock

Edelbrock 5266 Manual de usuario

Manuales populares de Pieza de automóvil de otras marcas

Dakota Digital

Dakota Digital 650277 Manual de usuario

bosal

bosal 037031 Manual de usuario

Vintage Air

Vintage Air 571063 Manual de usuario

GFB

GFB EX38 Manual de usuario

bosal

bosal 028091 Manual de usuario

Dodge

Dodge 8W-43 Guía de inicio rápido

ICI

ICI Magnum FBM10DGN Manual de usuario

Volant Perfomance

Volant Perfomance 19435 Manual de usuario

BENDIX

BENDIX GEN 4 GEN 5 ABS Manual de usuario

Vintage Air

Vintage Air 571065 Manual de usuario

Rugged Ridge

Rugged Ridge 11503.13 Manual de usuario

BENDIX

BENDIX CYCLONE DURADRAIN TRAILER WATER Manual de usuario

Porsche

Porsche 968 - ASSEMBLY INSPECTION PROCEDURE AND MAINTENANCE... Guía

Sumitomo

Sumitomo FINE CYCLO FC-A 15 G Manual de usuario

Toshiba

Toshiba 48-1250 A Manual de usuario

aldes

aldes EHT2 Manual de usuario

Go Rhino

Go Rhino 24371T Manual de usuario

BBK

BBK 18950 Manual de usuario