Edelbrock 5588 Manual de usuario

Edelbrock Rebuildable Race Muffler

Repack Kit

Installation Instructions

Catalog #5588/55881

§PLEASE study these instructions carefully before installing your Headers. If you have any questions or

problems, please call our Technical Hotline at: 1-800-416-8628 from 8:00 am -5:00 pm, Monday-

Friday, Pacific Standard Time or e-mail us at [email protected].

§TOOLS NEEDED

1. Drill motor

2. 3/16 Drill bit

3. Pop rivet gun

§HOW TO TELL IF IT’S TIME TO REPACK YOUR EDELBROCK REBUILDABLE RACE MUFFLER

1. If you have noticed a sound level change from the time when the mufflers were first installed.

2. When tapping on the outside of the muffler case it has an empty or hollow sound, it probably needs to be

repacked.

Note 1: Track size, number of laps run, engine condition and tune, type of fuel used, muffler placement, etc. all

have an effect on the muffler packing life. Typical S.C.R.A. Sprint Car that were tested with the

Edelbrock Rebuildable Race Muffler have been getting between 5 to 10 nights of racing on new or

repacked mufflers.

Note 2: Collector turndowns can be used to further quiet your vehicle. Turn downs can be installed to deflect

sound down to the ground or under the car and away from the D.B. meters.

§DISASSEMBLY

1. Using the drill motor and the 3/16 drill bit, drill out all of the rivets in the muffler case being cautious not to

enlarge the rivet holes.

2. Disassemble the muffler assembly.

3. Remove what is left of the old packing, clean were needed, be sure to remove any pieces of the old rivets that

may be remaining in the outer case.

§ASSEMBLY

1. Slip on the new steel wool sleeve (Note: On the 3 ½” diameter muffler, a piece of 3” diameter tubing flared

to 3 ½” I.D. on one end will make this job much easier).

2. Wrap the ceramic packing around the installed steel wool sleeve.

3. Wrap the ceramic cloth material around the outside of the ceramic packing.

Note: Position the seam or the end of the packing and the cloth on opposite sides of the muffler. Rubber

bands or masking tape can be used to hold the packing in place.

4. Slide the outer case over the outside of the ceramic cloth and packing. Stand the muffler on the outlet end,

gently squeeze the packing at the top and begin working down while the outer case slips down over the new

packing.

Note: Make sure the packing and ceramic cloth stay in place as the outer case is worked down. The better

the repack job the longer it will be between repacks.

5. When the outer case has been completely slipped down, install the inlet end of muffler and align the rivet

holes. Using the rivet gun install the rivets.

Note: After the muffler goes through a number of repacks it may be necessary to drill additional or new

holes to hold the muffler case securely together.

Edelbrock Corporation • 2700 California Street • Torrance • California 90503

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Pieza de automóvil de Edelbrock

Edelbrock

Edelbrock 71900 Manual de usuario

Edelbrock

Edelbrock 2838 Manual de usuario

Edelbrock

Edelbrock 72230 Manual de usuario

Edelbrock

Edelbrock Victor Jr. 289-302 Manual de usuario

Edelbrock

Edelbrock 16211-MBN-640 Manual del propietario

Edelbrock

Edelbrock Ford Mustang 3381 Manual de usuario

Edelbrock

Edelbrock 68572 Manual de usuario

Edelbrock

Edelbrock 1768 Manual de usuario

Edelbrock

Edelbrock 5275 Manual de usuario

Edelbrock

Edelbrock 63-0342 Manual de usuario

Edelbrock

Edelbrock 68752 Manual de usuario

Edelbrock

Edelbrock Nitrous System 70410 Manual de usuario

Edelbrock

Edelbrock 7788 Manual de usuario

Edelbrock

Edelbrock 65912 (Ceramic-Coated) Manual de usuario

Edelbrock

Edelbrock 3550 Manual de usuario

Edelbrock

Edelbrock 5204 Manual de usuario

Edelbrock

Edelbrock 5213 Manual de usuario

Edelbrock

Edelbrock Performer IAS Manual de usuario

Edelbrock

Edelbrock 68452 Manual de usuario

Edelbrock

Edelbrock 4500 Series Carbs Manual de usuario

Edelbrock

Edelbrock 5202 Manual de usuario

Edelbrock

Edelbrock Performer-Plus 2132 Manual de instrucciones

Edelbrock

Edelbrock 63-0181 Manual de usuario

Edelbrock

Edelbrock Ford Mustang 17931 Manual de usuario

Manuales populares de Pieza de automóvil de otras marcas

Dakota Digital

Dakota Digital 650277 Manual de usuario

bosal

bosal 037031 Manual de usuario

Vintage Air

Vintage Air 571063 Manual de usuario

GFB

GFB EX38 Manual de usuario

bosal

bosal 028091 Manual de usuario

Dodge

Dodge 8W-43 Guía de inicio rápido

ICI

ICI Magnum FBM10DGN Manual de usuario

Volant Perfomance

Volant Perfomance 19435 Manual de usuario

BENDIX

BENDIX GEN 4 GEN 5 ABS Manual de usuario

Vintage Air

Vintage Air 571065 Manual de usuario

Rugged Ridge

Rugged Ridge 11503.13 Manual de usuario

BENDIX

BENDIX CYCLONE DURADRAIN TRAILER WATER Manual de usuario

Porsche

Porsche 968 - ASSEMBLY INSPECTION PROCEDURE AND MAINTENANCE... Guía

Sumitomo

Sumitomo FINE CYCLO FC-A 15 G Manual de usuario

Toshiba

Toshiba 48-1250 A Manual de usuario

aldes

aldes EHT2 Manual de usuario

Go Rhino

Go Rhino 24371T Manual de usuario

BBK

BBK 18950 Manual de usuario