Edelbrock 28385 Manual de usuario

Brochure #63-28385Page 1

Catalog #28385

Rev. 7/08 - AJ/mc

EFI Victor Jr. 4.6L Intake Manifold

For 4.6L SOHC Ford V8

Catalog #28385

INSTALLATION INSTRUCTIONS

PLEASE study these instructions carefully before beginning this installation. Most installations can be accomplished with common tools and

procedures. However, you should be familiar with and comfortable working on your vehicle. If you do not feel comfortable performing this installation,

it is recommended to have the installation completed by a qualified mechanic. If you have any questions, please call our Technical Hotline at:

1-800-416-8628, 7:00 am - 5:00 pm, Pacific Standard Time, Monday through Friday or e-mail us at [email protected].

IMPORTANT NOTE: Proper installation is the responsibility of the installer. Improper installation

will void your warranty and may result in poor performance and engine or vehicle damage.

DESCRIPTION: This intake manifold is designed to allow the use of aftermarket EFI on a Ford 4.6L Modular Single Overhead Cam engine. This will

eliminate the use of the OEM fuel injection system and is intended for longblocks that have been installed in early model or custom vehicles. A fuel

rail kit for this manifold is sold seperately as part #3639.

INSTALLATION PROCEDURE

KIT CONTENTS:

❑1 Victor Jr. Intake Manifold

❑1 Fitting; 3/8 NPT to 3/4” hose

❑1 Plug; 3/8 NPT

❑8 Bolt; M6 x 1.0 x 30mm hex flange head

NOTE:

This intake manifold is not designed for use in street driven vehicles equipped with the 4.6L engine. It is primarily intended to be used on race

cars that require air and fuel in excess of what the factory fuel injection system and manifold are capable of supplying. These installation instructions

do not attempt to cover the steps necessary to convert a vehicle to aftermarket fuel injection, they only cover what is needed to install this intake on

a properly prepared longblock.

MANIFOLD INSTALLATION:

1. Use only the recommended OEM intake gaskets with this manifold.

2. Fully clean the intake manifold and cylinder head flanges. No

sealants or adhesives are necessary.

3. Install the manifold on the block. Lightly coat the manifold bolts with

30W motor oil then gently thread them into the heads to hold the

intake in place. Do not apply any torque to the bolts at this time.

4. Install the themostat and allow it to drop into the machined recess.

The o-ring supplied with the thermostat should then be pressed in

and compressed by the thermostat housing.

5. The manifold bolts (including the thermostat housing bolts) can now

be tightened according to the torque sequence

(See Figure 1).

Figure 1 - Torque Sequence

Torque manifold bolts to 15-20 ft/lbs.

Edelbrock Corporation • 2700 California St. • Torrance, CA 90503

Tech-Line: 1-800-416-8628 • E-Mail: [email protected]

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Pieza de automóvil de Edelbrock

Edelbrock

Edelbrock 1483 Manual de usuario

Edelbrock

Edelbrock 3862 Manual de usuario

Edelbrock

Edelbrock 6652 Manual de usuario

Edelbrock

Edelbrock 4737 Manual de usuario

Edelbrock

Edelbrock 5721 Manual de usuario

Edelbrock

Edelbrock Performer-Plus 2132 Manual de instrucciones

Edelbrock

Edelbrock Victor Jr. 289-302 Manual de usuario

Edelbrock

Edelbrock 73828 Manual de usuario

Edelbrock

Edelbrock 5728 Manual de usuario

Edelbrock

Edelbrock 71850 Manual de usuario

Edelbrock

Edelbrock 67362 Manual de usuario

Edelbrock

Edelbrock Nitrous Refill Station 78000 Manual de usuario

Edelbrock

Edelbrock PERFORMER-PLUS 2182 Manual de usuario

Edelbrock

Edelbrock 2-R Manual de usuario

Edelbrock

Edelbrock Edelbrock Header 6525 Manual de usuario

Edelbrock

Edelbrock 72285 Manual de usuario

Edelbrock

Edelbrock Torker II 5021 Manual de usuario

Edelbrock

Edelbrock 70405 Manual de usuario

Edelbrock

Edelbrock Torker II 5081 Manual de usuario

Edelbrock

Edelbrock 6601 Manual de usuario

Edelbrock

Edelbrock 65732 Manual de usuario

Edelbrock

Edelbrock 65912 (Ceramic-Coated) Manual de usuario

Edelbrock

Edelbrock 65812 Manual de usuario

Edelbrock

Edelbrock 4779 Manual de usuario

Manuales populares de Pieza de automóvil de otras marcas

Dakota Digital

Dakota Digital 650277 Manual de usuario

bosal

bosal 037031 Manual de usuario

Vintage Air

Vintage Air 571063 Manual de usuario

GFB

GFB EX38 Manual de usuario

bosal

bosal 028091 Manual de usuario

Dodge

Dodge 8W-43 Guía de inicio rápido

ICI

ICI Magnum FBM10DGN Manual de usuario

Volant Perfomance

Volant Perfomance 19435 Manual de usuario

BENDIX

BENDIX GEN 4 GEN 5 ABS Manual de usuario

Vintage Air

Vintage Air 571065 Manual de usuario

Rugged Ridge

Rugged Ridge 11503.13 Manual de usuario

BENDIX

BENDIX CYCLONE DURADRAIN TRAILER WATER Manual de usuario

Porsche

Porsche 968 - ASSEMBLY INSPECTION PROCEDURE AND MAINTENANCE... Guía

Sumitomo

Sumitomo FINE CYCLO FC-A 15 G Manual de usuario

Toshiba

Toshiba 48-1250 A Manual de usuario

aldes

aldes EHT2 Manual de usuario

Go Rhino

Go Rhino 24371T Manual de usuario

BBK

BBK 18950 Manual de usuario