EcLine EC-AHT-O1 Manual de usuario

User Manual

EC-AHT-O1

Handheld Terminal

EC-AHT-O1 User Manual V1.0 2

No part of this document may be reproduced, distributed, translated, or stored in any form without

the prior written permission of EC Electronics Limited. All brands and product names mentioned

herein may be trademarks or registered trademarks of their respective owners. Product

specifications are subject to change without prior notice.

Disclaimer

The contents of this document are provided as is. EC Electronics Limited makes no representations

or warranties with respect to the contents herein and specifically disclaims any express or implied

warranties of merchantability or fitness for any particular purpose. EC Electronics Limited reserves

the right to revise this document at any time without prior notice.

EC-AHT-O1 User Manual V1.0 3

Regulatory Information

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation. Changes or

modifications not expressly approved by the party responsible for compliance could void the user’s

authority to operate the equipment.

FCC Radiation Exposure Statement

This device should be installed and operated with a minimum separation distance of 20cm between

the radiator and all persons. This transmitter must not be co-located or operated in conjunction with

any other antenna or transmitter.

CE Statement

The SAR limit of Europe is 2.0 W/kg. The highest SAR value reported under this standard during

product certification for body worn operation is 0.952 W/kg. To maintain compliance with RF

exposure requirements, use accessories that maintain a 1.5cm separation distance between the

user's body and the back of the handset. The use of belt clips, holsters and similar accessories

should not contain metallic components in its assembly. The use of accessories that do not satisfy

these requirements may not comply with RF exposure requirements, and should be avoided.

Hereby, EC Electronics Limited declares that this device is in compliance with the essential

requirements and other relevant provisions of Directive 1999/5/EC.

EC-AHT-O1 User Manual V1.0 4

Safety Information

Please read the following information carefully before using the device for the first time, and keep

this User Manual in a safe place for future reference.

 Always treat the device with care and keep it in a clean and dust-free environment.

 Do not expose the device to extremely hot, cold or humid environment. The operation

temperature is from –10°C to 50°C.

 Do not use the device in wet or rainy conditions.

 Do not charge the device in extremely hot (> 40°C) or cold conditions (< 0°C).

 Do not attempt to disassemble or modify the device including the charger.

 Do not operate the device when your hands are wet.

 Do not insert foreign objects into the openings of the device.

 Use only the adaptor and battery approved for the device.

 The adapter shall be installed near the device and shall be easily accessible.

 Do not use the adaptor if the power cord or plug is damaged.

 Do not disassemble, crush or puncture the battery.

 Do not expose the battery to high temperatures.

 Do not let battery terminals touch other metal objects that could lead to short-circuit of the

battery.

 Do not dispose of the battery in fire or water.

 Dispose of used battery properly according to local laws and regulations.

 The device shall only be connected to a USB interface of version 3.0 or higher. The connection

to so called power USB is prohibited.

Battery Safety

Charge battery only at ambient temperatures ranging from 40°C.

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or

equivalent type of battery recommended by the manufacturer. Dispose of used batteries according

to battery manufacturer’s instructions.

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.

DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

CAUTION: Battery charging temperature upper limit is 40°C.

Adapter Safety

When charging, please place the device in an environment that has a normal room temperature and

good ventilation. It is recommended to charge the device in an environment with a temperature that

ranges from 0°C~40°C.

For altitude 2km below use only

EC-AHT-O1 User Manual V1.0 5

Contents

Disclaimer ........................................................................................................................... 2

Regulatory Information ..................................................................................................... 3

Safety Information ............................................................................................................. 4

Battery Safety ............................................................................................................................................ 4

Adapter Safety ........................................................................................................................................... 4

1. Product Specifications ............................................................................................... 6

2. Getting Started ............................................................................................................ 9

2.1 Charging the Terminal .................................................................................................... 9

2.1.1 Charging with a USB charger ........................................................................................................ 9

2.2 Powering the Terminal On and Off ................................................................................ 9

2.2.1 Powering on the Terminal .............................................................................................................. 9

2.2.2 Powering off the Terminal .............................................................................................................. 9

2.3 Suspending the Terminal ............................................................................................... 9

2.4 Soft Reset ........................................................................................................................ 9

2.5 Fixing the Phone Strap ................................................................................................. 10

3. Using Wi-Fi................................................................................................................. 11

3.1 Connecting to a Wi-Fi Network .................................................................................... 11

3.2 Disconnecting from a Wi-Fi Network ........................................................................... 12

3.3 Disconnecting the Selected AP Name from a Wi-Fi Network Permanently ............... 12

4. Using BT .................................................................................................................... 13

4.1 Connecting a BT Device ............................................................................................... 13

4.2 Disconnecting a BT Device .......................................................................................... 14

4.3 Disconnecting the Selected AP Name from a Wi-Fi Network Permanently ............... 15

5. Using Cellular ............................................................................................................ 16

5.1 Inserting a SIM card ...................................................................................................... 16

5.2 Setting up Mobile Data ................................................................................................. 16

5.3 Disconnect Mobile Data ............................................................................................... 17

6. Using NFC .................................................................................................................. 18

6.1 Reading a NFC Tag ....................................................................................................... 18

6.2 Enable NFC ................................................................................................................... 18

6.3 Disable NFC .................................................................................................................. 19

EC-AHT-O1 User Manual V1.0 6

1. Product Specifications

Function

Technical

pecifications

CPU Model

MT6761D

CPU Feature

Quad

ore 1.8GHz

Operat

ing System

Android 9.0 GO

Battery

00mAh

ROM

16GB

RAM

2GB LPDDR3

Display

5.45",HD+ IPS

Touch Panel Technology

oints

Primary Camera Type

5MP

Barcode scanner

2D Barcode Scanner

Buttons Power Button

Multi

function Button

Microphone

1pcs

Speak

1pcs

System I/O connector

Type

Ver 5.0

WLAN

IEEE 802.11 ac/a/b/g/n, 2.4G/5G

GPS

Yes

NFC

Yes

Printer

2" printer

Thermal paper

idth 57 mm,

iameter 40 mm

Charger

1, 5V2A

EC-AHT-O1 User Manual V1.0 7

Device Overview

No.

Item

Description

1 Earphone Jack Connect a stereo earphone

2 Volume Down

Button

Compatible with the functions of code scanning and volume down

adjustment

3 NFC Reader Scanning area for NFC tags

4 Indicator Lamp Used for indicating the steps for swiping card and charging state

5 Mic Mic in

6 Type-C USB Used for charging equipment and data transfer

7 Power Button

Short Press: Light the screen, lock the screen.

Long Press: In shutdown state, long press 2-3 seconds to turn on;

When in use, press 2-3 seconds for a long time, and

you can choose

to turn off, turn on or screen capture.

In the crash state, press 10 seconds to restart automatically.

8 Volume up Button

Compatible with the functions of code scanning and volume up

adjustment

9 Extend Pins To connect to dock. (Need to buy dock separately)

A Phone Strap Phone Strap Hole

B Printer

Printing instructions

This device supports 58mm thermal paper with the specifications of

57±0.5mmφ40mm

① Open the paper container

② Feed the paper correctly into the paper container in the direction

as shown, and pull some paper outside the cutter;

③ Close the cover of the paper container to finish printing paper

feeding.

Note: If the printed paper is blank, please check whether the

paper roll has been installed in the correct direction.

EC-AHT-O1 User Manual V1.0 8

C 2D Scanner Scan QR Code (Optional)

D Rear Camera Supports photographing and 1D/2D code quick scanning

E SIM Card Slot MicroSIM card slot (SIM 1 & SIM 2)

F Battery Connector

Connect the battery

G Battery 3.6V 5200mAh battery

EC-AHT-O1 User Manual V1.0 9

2. Getting Started

2.1 Charging the Terminal

The terminal can be charged through the docking station or a USB adaptor.

2.1.1 Charging with a USB charger

1. Plug the USB charging cable supplied with the terminal into a USB charger.

2. Connect the other end of the USB charging cable into the Type 3 USB port of the terminal.

3. Plug the USB charger into a suitable power socket, and fully charge the terminal.

While charging, the device and the charger may become hot and stop charging. This usually

does not affect the device’s lifespan or performance and is in the device’s normal range of

operation. Disconnect the charger from the device and wait for the device to cool down.

2.2 Powering the Terminal On and Off

2.2.1 Powering on the Terminal

Press and hold the Power key for 3 seconds to power on the terminal.

2.2.2 Powering off the Terminal

Press and hold the Power key for 3 seconds, and follow the screen instructions to power off the

device.

2.3 Suspending the Terminal

If the terminal is on, press the Power key once to suspend the device (i.e. entering sleep mode),

saving battery power.

To resume operation from sleep mode, press the Power key once.

2.4 Soft Reset

Soft reset shuts down and reboots the device. It preserves installed applications, settings, and

saved data. To perform a soft reset:

1. Open the rear cover.

2. Unplug the battery connector and plug in again.

3. The terminal shuts down and reboots.

Battery

Connector

EC-AHT-O1 User Manual V1.0 10

2.5 Fixing the Phone Strap

An optional phone strap is available for the terminal. To fix the phone strap on the terminal:

1. Turn over the terminal.

2. Tight the phone strap into the phone strap hole

Tabla de contenidos

Otros manuales de Terminal táctil de EcLine

EcLine

EcLine EC-15i5 Manual de usuario

EcLine

EcLine EC-AM-102 Manual de usuario

EcLine

EcLine EC-1200 Manual de usuario

EcLine

EcLine EC-1519 Manual de usuario

EcLine

EcLine EC-VP-1100 Manual de usuario

EcLine

EcLine EC-VP-1100 Manual de usuario

EcLine

EcLine EC-1519I3 Manual de usuario

EcLine

EcLine EC-1530 Manual de usuario

EcLine

EcLine EC-AM-102-80 Manual de usuario

EcLine

EcLine EC-AM-102-58 Manual de usuario

EcLine

EcLine EC-VP-1100A Manual de usuario

EcLine

EcLine EC-1219 Manual de usuario

EcLine

EcLine EC-1559 Manual de usuario

EcLine

EcLine EC-WT-10 Manual de usuario

EcLine

EcLine EC-VP-3100 Manual de usuario

EcLine

EcLine EC-1553 Manual de usuario

Manuales populares de Terminal táctil de otras marcas

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Manual de usuario

Ingenico

Ingenico AXIUM EX4000 Manual de usuario

Heisei Electronics

Heisei Electronics Q-POS 815 Manual de usuario

Amano

Amano MTX-15 Manual de usuario

FLOWBIRD

FLOWBIRD CWT Compact Touch Manual de usuario

Demco

Demco SP7 Manual de usuario

Lathem

Lathem PC600 Series Manual de usuario

Partner

Partner MF-2352 Manual de usuario

NCR

NCR RealPOS 7460-2 Manual

Simrad

Simrad MS50 Instrucciones de montaje

Unitech

Unitech MR350 MKII Guía de inicio rápido

Jungheinrich

Jungheinrich WMT 210 Manual de usuario

Motorola

Motorola MTP850 Manual de usuario

YASKAWA

YASKAWA 62H-MDC0 Manual de usuario

MVG industries

MVG industries NeptuLink Manual de usuario

Price Industries Limited

Price Industries Limited FDC Manual de instrucciones

Honeywell

Honeywell TemaKey Manual de usuario

EBN

EBN BPC65-B-A16G Manual de usuario