Eaton Powerware 9125 Manual de usuario

9125

INSTALLATION INSTRUCTIONS

Seismic Kit

For use with Two-in-One

2500–3000 VA Models

www.powerware.com

Powerware is a registered trademark of Powerware Corporation.

may be reproduced in any way without the express written approval of Powerware Corporation.

Powerware®9125 (2500–3000 VA) Seismic Kit Installation Instructions SRev A www.powerware.com

Powerware 9125 (2500–3000 VA) Seismic Kit

The PowerwareR9125 (2500–3000 VA) seismic kit is available in two

models: a four-unit model and a six-unit model. The four-unit model can

secure up to four UPS, battery, or PowerPassRDistribution Module (PDM)

cabinets; the six-unit model holds up to six cabinets. Both models include

spacers for any extra openings.

Four-Unit Model

(Shown with Spacer)

Six-Unit Model

(Shown with Spacer)

Figure 1. Seismic Kits

The seismic kit includes:

쑺1 seismic base with casters

쑺1 front strap

쑺1 back strap with tabs

쑺4 seismic base angles

쑺4spacers

쑺8M6´16 hex bolts

쑺8M6lockwashers

쑺24 M4 ´8 Phillips hex-head screws with lockwashers

쑺6M4´10 Phillips hex-head screws with lockwashers

Powerware 9125 (2500–3000 VA) Seismic Kit

4Powerware®9125 (2500–3000 VA) Seismic Kit Installation Instructions SRev A www.powerware.com

The following steps explain how to install the seismic kit.

1. If you are bolting the cabinet to the floor, use the following drill

patterns to prepare the floor mounting holes.

60.85 cm

(23.96 in)

53.96 cm

(21.24 in)

48.00 cm

(18.90 in)

43.00 cm

(16.93 in)

Ø1.43 cm

(0.56 in)

Figure 2. Drill Pattern for the Four-Unit Model

Powerware 9125 (2500–3000 VA) Seismic Kit

Powerware®9125 (2500–3000 VA) Seismic Kit Installation Instructions SRev A www.powerware.com

60.85 cm

(23.96 in)

53.96 cm

(21.24 in)

60.40 cm

(23.78 in)

65.41 cm

(25.75 in)

Ø1.43 cm

(0.56 in)

Figure 3. Drill Pattern for the Six-Unit Model

Powerware 9125 (2500–3000 VA) Seismic Kit

6Powerware®9125 (2500–3000 VA) Seismic Kit Installation Instructions SRev A www.powerware.com

2. Attach the front and back straps to the base using the supplied

M6 ´16 hex bolts and lockwashers (see Figure 4). Verify the

straps align with the front and back edges of the base.

NOTE For floor mounting, also attach the seismic base angles with the

front and back straps as shown in Figure 5.

NOTE The base casters are removeable. To mount the seismic kit flush

with the floor, remove the casters and secure the base angles using the

inside screw position.

Figure 4. Attaching the Straps

Figure 5. Seismic Base Angles for Floor Mounting

Powerware 9125 (2500–3000 VA) Seismic Kit

Powerware®9125 (2500–3000 VA) Seismic Kit Installation Instructions SRev A www.powerware.com

3. On the back of each cabinet, remove the screw on the top left

corner and discard (see Figure 6).

Figure 6. Removing Cabinet Screws

4. Beginning with a middle position, slide each cabinet into place.

NOTE The PDM must be installed to the left of the UPS and the EBM(s)

must be installed to the right of the UPS.

Figure 7. Sliding in a Cabinet

Powerware 9125 (2500–3000 VA) Seismic Kit

8Powerware®9125 (2500–3000 VA) Seismic Kit Installation Instructions SRev A www.powerware.com

5. Attach the cabinet to the tab on the back strap by installing one

of the supplied M4 ´10 Phillips hex-head screws (see Figure 8).

Figure 8. Securing the Cabinet to the Back Strap

6. Fasten the top of the cabinet to the front strap with two of the

supplied M4 ´8 Phillips hex-head screws.

Figure 9. Securing the Front Strap

Powerware 9125 (2500–3000 VA) Seismic Kit

Powerware®9125 (2500–3000 VA) Seismic Kit Installation Instructions SRev A www.powerware.com

7. Install the remaining cabinets, leaving any empty slots to the

outside position(s).

If there is an empty slot, install spacers to complete the seismic

kit. Attach the spacer to the front and back straps using the

supplied M4 ´8 Phillips hex-head screws.

Figure 10. Installing Spacers

8. Roll the loaded cabinet to its permanent location.

If you installed seismic base angles, secure the base to the floor

with earthquake bolts (not provided).

Figure 11. Floor Mounting

Powerware 9125 (2500–3000 VA) Seismic Kit

10 Powerware®9125 (2500–3000 VA) Seismic Kit Installation Instructions SRev A www.powerware.com

Otros manuales para Powerware 9125

Otros manuales de Unión Postal Universal de Eaton

Eaton

Eaton Powerware 9390 Manual de usuario

Eaton

Eaton Ellipse ECO 500 Manual de usuario

Eaton

Eaton 9EEBM240 Manual de usuario

Eaton

Eaton 5E Instrucciones de montaje

Eaton

Eaton 5E Manual de usuario

Eaton

Eaton Power Xpert 9395P-900 Series Manual de usuario

Eaton

Eaton Powerware 9155 Manual de usuario

Eaton

Eaton 93PM IBC-L Manual

Eaton

Eaton Ellipse ECO 500 Manual de usuario

Eaton

Eaton 9PX Instrucciones de montaje

Eaton

Eaton 93PM-50-1 Manual de usuario

Eaton

Eaton Ellipse ASR 450 Manual de usuario

Eaton

Eaton Powerware BladeUPS Manual de usuario

Eaton

Eaton Powerware 9390 Manual de usuario

Eaton

Eaton Powerware 9170+ UPS 3-18 kVA Manual de usuario

Eaton

Eaton 93E Manual de usuario

Eaton

Eaton Powerware 9390 Manual de usuario

Eaton

Eaton 9EHD Series Manual de usuario

Eaton

Eaton 5P1000RC Manual de usuario

Eaton

Eaton Powerware 9170+ Manual

Eaton

Eaton Power Xpert 9395P Manual de usuario

Eaton

Eaton 9E-IN 1K Manual de usuario

Eaton

Eaton 9125 Two-in-One UPS 2500 Manual de usuario

Eaton

Eaton TRIPP LITE Series Instrucciones de montaje

Manuales populares de Unión Postal Universal de otras marcas

Pylontech

Pylontech Victron & Pylontech US5000 Manual de usuario

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Manual de usuario

Mecer

Mecer ME-1000-WTU Manual de usuario

Mustek

Mustek PowerMust 530(B) Plus Manual de instalación y operación

Emerson

Emerson Liebert NXL series Manual de usuario

MAKELSAN

MAKELSAN BOXER SERIES Manual de usuario

Block

Block PC-0524-400-0 Manual de usuario

CyberPower

CyberPower CP585LCD Manual de usuario

CyberPower

CyberPower Office Tower Series UPS 1000 Manual de usuario

CyberPower

CyberPower BM100 Manual de usuario

Best Power

Best Power 610 Manual de usuario

Best Power

Best Power Unity/I UT3K Manual de usuario

Mustek

Mustek PowerMust 400 Offline Manual de usuario

Xantrex

Xantrex Trace 512 UR-UPS Manual de usuario

Forza

Forza SL-1501UL Manual de usuario

LEGRAND

LEGRAND keor 310081 Manual de usuario

ABB

ABB Conceptpower DPA 500 Manual de usuario

ZincFive

ZincFive BC Series Manual de usuario