Eaton 93PM IBC-L Manual de usuario

Eaton 93PM Cabinet Seismic Tie Strap Installation Instructions

Use these instructions to install cabinet top and rear seismic tie straps to secure the Uninterruptible Power

Supply (UPS) and Sidecar Integrated Accessory Cabinet (SIAC), and when installed in a line-up-and-match

configuration the Integrated Battery Cabinets (IBCs) and Integrated Accessory Cabinets (IACs).

To install the tie straps:

1. Unload and mechanically install the UPS and IBCs, and if applicable IACs, according to the instructions in

the applicable installation and operation manual.

2. Remove the screws along each adjacent cabinet top panel securing the top panels (see Figure 1). Retain

the hardware for later use.

3. Install top tie strap between each UPS, IBC, IAC, and SIAC (see Figure 1). Secure the tie strap with

retained hardware.

4. If the long rear shipping bracket (tie strap) is installed between the UPS and an SIAC and no

line-up-and-match IBC or IAC is installed, proceed to Step 7; otherwise, proceed to Step 5.

5. Remove the screws along each adjacent cabinet (UPS, SIAC, IBC, or IAC) rear panel securing the cabinet

rear panels (see Figure 1). Retain the hardware for later use.

6. Install rear tie strap between each UPS, IBC, IAC, and SIAC (see Figure 1). Ensure strap is installed at the

top of the cabinet. Secure the tie strap with retained hardware.

7. Installation is complete.

For More Information

Refer to the applicable Eaton 93PM Installation and Operation manual for the following additional information:

lInstallation instructions, including site preparation, planning for installation, wiring and safety information,

and detailed illustrations of cabinets with dimensional and connection point drawings

Visit www.eaton.com/powerquality or contact an Eaton service representative for information on how to obtain

copies of these manuals.

Getting Help

If help is needed with any of these instructions, please call the Customer Reliability Center at:

United States: 1-800-843-9433

Canada: 1-800-461-9166 ext 260

All other countries: Call your local service representative

Please use the following e-mail address for comments, suggestions, or to report an error in these instructions:

E-ESSDocumentation@eaton.com

NOTE Refer to the applicable installation and operation manual supplied with the UPS,

SIAC, IBC, or IAC for dimensions and required clearances.

Seismic Tie Straps (part of Seismic Mounting Bracket Kit)

Top Tie Strap (Only provided with UPS kits. Strap is provided as standard with IACs. and IBCs) 1

Rear Tie Strap 1

2 Eaton 93PM Cabinet Seismic Tie Strap Installation Instructions P-164000471—Rev 1 www.eaton.com/powerquality

Figure 1. Typical Top and Rear Seismic Tie Strap Installation

Eaton is a registered trademark of Eaton Corporation or its subsidiaries and affiliates. All other trademarks are

property of their respective companies.

reproduced in any way without the express written approval of Eaton Corporation.

*P-164000471 1*

P-164000471 1

Cabinet Top

Seismic Tie Strap

Cabinet Rear

Seismic Tie Strap

Otros manuales para 93PM IBC-L

Tabla de contenidos

Otros manuales de Unión Postal Universal de Eaton

Eaton

Eaton EX Pulsar Series Manual de usuario

Eaton

Eaton 5P 850VA Manual de usuario

Eaton

Eaton Powerware 9155 Manual de usuario

Eaton

Eaton Powerware 5125 Manual de usuario

Eaton

Eaton Eaton 5PX Instrucciones de montaje

Eaton

Eaton 9E15Ki Manual de instrucciones

Eaton

Eaton 9SX 6000VA Manual de usuario

Eaton

Eaton Powerware 9355 Manual de usuario

Eaton

Eaton Power Xpert 9395 Manual de usuario

Eaton

Eaton 9315 Manual de usuario

Eaton

Eaton 3S 700 Manual de usuario

Eaton

Eaton 500 Manual de usuario

Eaton

Eaton 5SC 1000i Rack2U Manual de usuario

Eaton

Eaton 10000HXL31 Manual de usuario

Eaton

Eaton FerrUPS FE Manual de usuario

Eaton

Eaton 5PX 1500i RT2U Manual de usuario

Eaton

Eaton 5PX 1000 RT2U Manual de usuario

Eaton

Eaton 93PR Series Manual

Eaton

Eaton Powerware 9125 Manual de usuario

Eaton

Eaton 9EHD-33-40/20 Instrucciones de funcionamiento

Eaton

Eaton Power Xpert Manual de programación

Eaton

Eaton PowerRite XT PRXT-0400A Manual de usuario

Eaton

Eaton 91PS UPS 8-40 kW Manual

Eaton

Eaton 3S 550 Manual de usuario

Manuales populares de Unión Postal Universal de otras marcas

Pylontech

Pylontech Victron & Pylontech US5000 Manual de usuario

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Manual de usuario

Mecer

Mecer ME-1000-WTU Manual de usuario

Mustek

Mustek PowerMust 530(B) Plus Manual de instalación y operación

Emerson

Emerson Liebert NXL series Manual de usuario

MAKELSAN

MAKELSAN BOXER SERIES Manual de usuario

Block

Block PC-0524-400-0 Manual de usuario

CyberPower

CyberPower CP585LCD Manual de usuario

CyberPower

CyberPower Office Tower Series UPS 1000 Manual de usuario

CyberPower

CyberPower BM100 Manual de usuario

Best Power

Best Power 610 Manual de usuario

Best Power

Best Power Unity/I UT3K Manual de usuario

Mustek

Mustek PowerMust 400 Offline Manual de usuario

Xantrex

Xantrex Trace 512 UR-UPS Manual de usuario

Forza

Forza SL-1501UL Manual de usuario

LEGRAND

LEGRAND keor 310081 Manual de usuario

ABB

ABB Conceptpower DPA 500 Manual de usuario

ZincFive

ZincFive BC Series Manual de usuario