Eaton Powerware 9395 Manual de usuario

Eaton 9395 High Performance*

Installation and Operation Manual

Sync Control

Installation and Operation Manual

*Referenced throughout as 9395P

Eaton 9395 High Performance*

Installation and Operation Manual

Sync Control

Installation and Operation Manual

*Referenced throughout as 9395P

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

This manual contains important instructions that you should follow during installation and maintenance of the UPS and batteries. Please

read all instructions before operating the equipment and save this manual for future reference.

CONSIGNES DE SÉCURITÉ IMPORTANTES

CONSERVER CES INSTRUCTIONS

Ce manuel comporte des instructions importantes que vous êtes invité à suivre lors de toute procédure d'installation et de maintenance

des batteries et de l'onduleur. Veuillez consulter entièrement ces instructions avant de faire fonctionner l'équipement et conserver ce

manuel afin de pouvoir vous y reporter ultérieurement.

Eaton and X-Slot are registered trademarks of Eaton Corporation or its subsidiaries and affiliates. National Electric Code and NEC are a

registered trademarks of National Fire Protection Association, Inc. All other trademarks are property of their respective companies.

without the express written approval of Eaton Corporation.

Eaton Power Xpert™9395P Sync Control Installation and Operation Manual SP-164000502 Rev 1 i

Table of Contents

List of Figures ii..............................................

1 Introduction 1-1............................................................................

1.1 Conventions Used in This Manual 1-2..........................................................................

1.2 Safety Warnings 1-3......................................................................................

1.3 For More Information 1-4...................................................................................

1.4 Getting Help 1-4.........................................................................................

2 Installation Plan and Unpacking 2-1............................................................

2.1 Creating an Installation Plan 2-1.............................................................................

2.2 Preparing the Site 2-1.....................................................................................

2.2.1 Environmental and Installation Considerations 2-1............................................................

2.2.2 Eaton Sync Control Wiring Preparation 2-4..................................................................

2.3 Inspecting and Unpacking the Eaton Sync Control 2-5..............................................................

3 Installation 3-1.............................................................................

3.1 Installation and Wiring with an Eaton 9395P UPS 3-1...............................................................

3.2 Installation and Wiring with an Eaton 9395P SBM 3-10..............................................................

4 Operating Instructions 4-1....................................................................

4.1 Startup for UPS Systems Equipped with an Eaton Sync Control 4-1.....................................................

4.2 Understanding Eaton Sync Control Operation 4-1..................................................................

4.3 Operation 4-3...........................................................................................

4.4 Maintenance Operations 4-5................................................................................

5 Warranty 5-1..............................................................................

TABLE OF CONTENTS

Eaton Power Xpert™9395P Sync Control Installation and Operation Manual SP-164000502 Rev 1

List of Figures

Figure 1‐1. Eaton Sync Control 1-1...........................................................................

Figure 1‐2. Eaton Sync Control with Door Open 1-2................................................................

Figure 2‐1. Eaton Sync Control Dimensions – Front View 2-2.........................................................

Figure 2‐2. Eaton Sync Control Dimensions – Side Views 2-3........................................................

Figure 3‐1. Typical Eaton Sync Control Wiring Terminal Locations 3-3..................................................

Figure 3‐2. Eaton Sync Control TB1 Terminal Block Detail 3-5........................................................

Figure 3‐3. TB6 Terminal Block Detail 3-6......................................................................

Figure 3‐4. Mini CSB Interface Terminals 3-6....................................................................

Figure 3‐5. Eaton 9395P UPS Interface Locations for Eaton Sync Control 3-7..............................................

Figure 3‐6. Relay Interface Card End View 3-8...................................................................

Figure 3‐7. Relay Interface Card Terminals 3-8...................................................................

Figure 3‐8. Industrial Relay Card 3-9..........................................................................

Figure 3‐9. SBM Control Pan Interface Terminal Locations 3-12........................................................

Figure 3‐10. TB1 and TB2 Interface Terminal Detail 3-13.............................................................

Figure 3‐11. TB4 and TB5 Interface Terminal Detail 3-13.............................................................

Figure 3‐12. Terminal Block TB2 Connector Assignments 3-14.........................................................

Figure 3‐13. Terminal Block TB3 Connector Assignments 3-14.........................................................

Figure 3‐14. SBM to UPS Interconnection System Control Wiring 3-15...................................................

Figure 4‐1. Typical Eaton Sync Control Block Diagram with a Eaton 9395P UPS, or 9395 SSBM. 4-2.............................

Figure 4‐2. Synchronization Reference Control 4-3................................................................

Figure 4‐3. Eaton Sync Control Controls and Indicators 4-4..........................................................

Eaton Power Xpert™9395P Sync Control Installation and Operation Manual SP-164000502 Rev 1 1-1

Chapter 1 Introduction

The Eaton®Sync Control maintains the critical load outputs of two separate single

Eaton 9395P UPS or SSBM systems in synchronization. Use of the Eaton Sync

Control provides the uninterrupted transfer of the load from one load bus to another

by means of downstream, dual-source, solid-state, transfer switches. Without the

load sync option, the two system output (critical load) buses could become out of

phase with each other. This condition occurs if suitable bypass sources are not

available or if the bypass sources feeding each system are not in sync with each

other. Examples of this condition are two systems supplied by separate diesel

generator sets, or the bypass sources for the two systems are lost.

Figure 1‐1 shows the front view and Figure 1‐2 shows the interior view of the Eaton

Sync Control.

Figure 1‐1. Eaton Sync Control

Figure

INTRODUCTION

Eaton Power Xpert™9395P Sync Control Installation and Operation Manual SP-164000502 Rev 1

1-2

Figure 1‐2. Eaton Sync Control with Door Open

1.1 Conventions Used in This Manual

This manual uses these type conventions:

SBold type highlights important concepts in discussions, key terms in procedures,

and menu options, or represents a command or option that you type or enter at a

prompt.

SItalic type highlights notes and new terms where they are defined.

SScreen type represents information that appears on the screen or LCD.

Icon Description

Information notes call attention to important features or instructions.

[Keys] Brackets are used when referring to a specific key, such as [Enter] or [Ctrl].

In this manual, the term UPS refers only to the UPS cabinet and its internal elements.

The term UPS system refers to the entire power protection system – the UPS

cabinet, the battery cabinet, and options or accessories installed.

INTRODUCTION

Eaton Power Xpert™9395P Sync Control Installation and Operation Manual SP-164000502 Rev 1 1-3

1.2 Safety Warnings

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

This manual contains important instructions that should be followed during installation and maintenance of

the UPS or SBM and batteries. Please read all instructions before operating the equipment and save this

manual for future reference.

The UPS or SBM cabinet is designed for industrial or computer room applications, and contains safety

shields behind the doors. However, these units comprise a sophisticated power system and should be

handled with appropriate care.

DANGER

The UPS or SBM contain LETHAL VOLTAGES. All repairs and service should be performed by

AUTHORIZED SERVICE PERSONNEL ONLY. There are NO USER SERVICEABLE PARTS inside the UPS

or SBM.

DANGER!

Cet onduleur peut générer des TENSIONS MORTELLES. L’installation et l’entretien ne doivent être

effectués que par le PERSONNEL AUTORISÉ. Ne contient AUCUNE PIÈCE REMPLAÇABLE.

WARNING

SThe UPS system contains its own energy source (batteries). The output terminals may carry live voltage

even when the UPS is disconnected from an AC source.

STo reduce the risk of fire or electric shock, install this UPS or SBM in a temperature and humidity

controlled, indoor environment, free of conductive contaminants. Ambient temperature must not exceed

40C (104F). Do not operate near water or excessive humidity (95% maximum). These systems are not

intended for outdoor use.

SEnsure all power is disconnected before performing installation or service.

AVERTISSEMENT!

SL’onduleur est alimenté par sa propre source d’énergie (batteries). Les bornes de sortie peuvent être sous

tension, même lorsque l’onduleur est débranché d’une source de courant alternatif.

SPour réduire les risques d’incendie et de décharge électrique, installer l’onduleur à l’intérieur, dans un

endroit exempt d’éléments conducteurs et où la température et l’humidité sont régulées. La température

ambiante ne doit pas dépasser 40C (104F). Ne pas faire fonctionner près d’une source d’eau ou dans

un endroit très humide (95 % maximum). Le système n’est pas conçu pour une utilisation extérieure.

SToutes les sources d’alimentation doivent être débranchées avant de procéder à l’installation et à

l’entretien.

CAUTION

SKeep the UPS or SBM doors closed to ensure proper cooling airflow and to protect personnel from

dangerous voltages inside the unit.

SDo not operate the UPS or SBM close to gas or electric heat sources.

SThe operating environment should be maintained within the parameters stated in this manual.

SKeep surroundings uncluttered, clean, and free from excess moisture.

SObserve all DANGER, CAUTION, and WARNING notices affixed to the inside and outside of the

equipment.

INTRODUCTION

Eaton Power Xpert™9395P Sync Control Installation and Operation Manual SP-164000502 Rev 1

1-4

MISE EN GARDE!

SGarder les portes de l’onduleur fermées pour garantir une circulation adéquate de l’air de refroidissement

et pour protéger le personnel des tensions dangereuses dans l’unité.

SNe pas installer ni faire fonctionner l’onduleur près d’une source de chaleur au gaz ou à l’électricité.

SLe milieu de fonctionnement doit toujours correspondre aux paramètres établis dans ce manuel.

SMaintenir les lieux rangés, propres et exempts d’une humidité excessive.

SRespecter les étiquettes DANGER, MISE EN GARDE et AVERTISSEMENT se trouvant à l’intérieur et à

l’extérieur de l’équipement.

1.3 For More Information

SEaton Power Xpert 9395P (675–900 kVA) Installation and Operation Manual

SEaton Power Xpert 9395P (1000–1200 kVA) Installation and Operation Manual

SEaton 9395 SBM Installation and Operation Manual

These manuals describe:

SUPS or SBM cabinet, optional components, and accessory installation instructions,

including site preparation, planning for installation, and wiring and safety

information. Detailed illustrations of cabinets and optional accessories with

dimensional and connection point drawings are provided.

SUPS or SBM operation, including cabinet controls, functions of the unit, standard

features and optional accessories, procedures for starting and stopping the UPS or

SBM, and information about maintenance and responding to system events.

SCommunication capabilities of the UPS or SBM system.

Visit www.eaton.com/powerquality or contact Eaton service representative for

information on how to obtain copies of these manuals.

1.4 Getting Help

If help is needed with any of the following:

SScheduling initial startup

SRegional locations and telephone numbers

SA question about any of the information in this manual

SA question this manual does not answer

Please call the Help Desk at:

United States: 1-800-843-9433 or 1-919-870-3028

Canada: 1-800-461-9166 ext 260

All other countries: Call your local service representative

Otros manuales para Powerware 9395

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Unidad de control de Eaton

Eaton

Eaton NH00 Manual de usuario

Eaton

Eaton EC4E-221-6D4T1 Manual

Eaton

Eaton XIOC-SER Manual

Eaton

Eaton Vickers DF3S4-16 Series Manual de usuario

Eaton

Eaton Vickers CM2 Series Manual de usuario

Eaton

Eaton Vickers FCGT-02-A-11 Series Manual de usuario

Eaton

Eaton eNMC2 Manual de usuario

Eaton

Eaton Cutler Hammer PanelMate ePro 7685 8 Series Manual de usuario

Eaton

Eaton CEAG TLS-BUS-Module Manual de servicio

Eaton

Eaton Durant Eclipse Series Manual de usuario

Eaton

Eaton Moeller SmartWire-Darwin EU5C-SWD-DP Manual

Eaton

Eaton HK-K95-K150 Manual de usuario

Eaton

Eaton Crouse-hinds series Manual de usuario

Eaton

Eaton PRC-E Series Manual de usuario

Eaton

Eaton P1 I2 Series Manual

Eaton

Eaton SC200 Manual de usuario

Eaton

Eaton Powerware Series Manual de usuario

Eaton

Eaton Char-Lynn 5 Series Manual de usuario

Eaton

Eaton PXS24 Series Manual de usuario

Eaton

Eaton COOPER POWER SERIES Instrucciones de instalación y funcionamiento

Eaton

Eaton DX-NET-BACNETMSTP Manual

Eaton

Eaton i-on30R Manual de usuario

Eaton

Eaton Crouse-hinds series Manual de usuario

Eaton

Eaton ZB150 Series Manual

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario

Flyron

Flyron FN-BC04 Manual de usuario