Eaton ESWV10401 Manual

Effective May 2011

ESWV10401

ESWV10801

Instructional Leaet

IL00412021E

1x4 and 1x8 passive coaxial

distribution module

Product description

The Eaton ESWV10401 and ESWV10801 coaxial

distribution module provides distribution of one

incoming coaxial signal (TV, CATV, modulated

signals) to four or eight locations with four pass-

through connections for SATV. Please be sure

to review this installation guide carefully prior

to installation.

Features

Video distribution

• Distributes one incoming video signal

to four or eight locations

• Four pass-through connections for satellite

TV distribution

• Bi-directional for digital and networking signals

Caution

installation preCautions: never install or

work with video wiring during a lightning

storm. never install telephone jaCks in

wet loCation unless the jaCk is speCifiCally

designed for use in wet loCations. have the

eleCtriCian ConneCt the aC outlet to branCh

CirCuit power. the ConneCtion should be

in aCCordanCe with the national eleCtriCal

Code,TartiCles 110, 250, and 300. never touCh

uninsulated telephone wires or terminals

unless the telephone line has been

disConneCted at the network interfaCe

or demarCation point.

Eaton Corporation

Electrical Sector

1111 Superior Ave.

Cleveland, OH 44114

United States

877-ETN-CARE (877-386-2273)

Eaton.com

Printed in USA

Publication No. IL00412021E / Z10942

May 2011

Eaton is a registered trademark

of Eaton Corporation.

All other trademarks are property

of their respective owners.

Instructional Leaet IL00412021E

Effective May 2011

1x4 and 1x8 passive coaxial

distribution module

Connecting incoming television or cable TV

to the coaxial distribution module

1. Run an RG6 coaxial cable from the video source (antenna or

cable TV D-marc) location to the ESWV10401 or ESWV10801.

2. Connect the RG6 cable to the RF input located on the

rear of the coaxial distribution module (see Figure 1).

3. Connect the RG6 coaxial cable running to the various

room locations to the coaxial connectors on the front

of the module marked Outputs (see Figure 2).

Connecting to satellite signals

1. Run two, three, or four RG6 cables from the satellite dish

to the ESWV10401 or ESWV10801 modules and connect the

cables to the SATV connectors on the rear (see Figure 1).

2. Connect the RG6 cables running to the various satellite

receiver (room) locations to the inputs on the front of the

ESWV10401 or ESWV10801 module (see Figure 2).

Figure 1.

Figure 2.

Input SATV connections

Four pass-through

connections

for SATV

Outputs to

room locations

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Unidad de control de Eaton

Eaton

Eaton DXC-EXT-LOCSIM Manual

Eaton

Eaton DXE-EXT-SET Manual

Eaton

Eaton ELC-PC12NNDR Manual de usuario

Eaton

Eaton NZM XBSM Series Manual

Eaton

Eaton Form 4D Recloser Control Manual de usuario

Eaton

Eaton CEAG 3-PM-IO-INV Manual de servicio

Eaton

Eaton VICKERS SystemStak Manual de usuario

Eaton

Eaton PM3 Manual

Eaton

Eaton EWFFSC15 Manual de usuario

Eaton

Eaton COOPER POWER SERIES Instrucciones de instalación y funcionamiento

Eaton

Eaton Power Xpert PXGMS Manual de programación

Eaton

Eaton Eaton 5PX Instrucciones de montaje

Eaton

Eaton Crouse-hinds series Manual de usuario

Eaton

Eaton i-on30R Manual de usuario

Eaton

Eaton Powerware 9125 Manual de usuario

Eaton

Eaton Crouse-hinds series Manual de usuario

Eaton

Eaton Vickers RF Series Manual de usuario

Eaton

Eaton SM65 Manual de usuario

Eaton

Eaton DeviceNet Manual de usuario

Eaton

Eaton Cutler-Hammer Modbus mMINT Guía de inicio rápido

Eaton

Eaton MEMSHIELD 4 Manual de usuario

Eaton

Eaton Cutler-Hammer PanelMate ePro PS Series Manual de usuario

Eaton

Eaton SL7 Series Manual

Eaton

Eaton Digitrip RMS 910 Manual

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario

Flyron

Flyron FN-BC04 Manual de usuario