Dynojet Power Vision Manual de usuario
QUICK START
INSTALLATION GUIDE
98100014.07 Toll Free: 1-800-992-4993
!!!---WARNING---!!!
FOR RACING VEHICLE USE ONLY
Note: This product is not for use on roads or vehicles subject to emission control requirements and is
not legal for use or installation on motor vehicles operated on public highways in the State of California
or other States where similar emission and decibel regulation laws may apply. The user shall determine
suitability of the product for his or her use. The user shall assume all risk and liability in violation of
regulations and any incurred financial obligations due to vehicle inspections or emissions tests.
Power Vision Quick Start Guide - 3
CONTENTS
1 Power Vision Unit
1 Diagnostic Cable
1 USB Cable
4 6” Cable ties
1 Mounting kit
(4 x M4 x .7 x 8mm bolts and washers)
1 Dual-Lock Velcro
1 Software CD
1 Quick Start Guide
USB MINI-B PORT
DYNOJET
CAN-LINK
EXPANSION
PORT
MOLEX 8 PIN VEHICLE
INTERFACE CONNECTION
VEHICLE DIAGNOSTIC
INTERFACE CABLE
INTEGRATED AMPS 4 HOLE
THREADED INSERTS FOR MOUNTING
(MOUNTING SCREWS INCLUDED)
98100014.07 Toll Free: 1-800-992-4993
INSTALLATION FROM DOWNLOAD
WINPV SOFTWARE INSTALLATION
• To Download the latest WinPV software visit www.flashyourharley.com
• From the top navigation menu, select SUPPORT then select SOFTWARE/FIRMWARE/
MANUALS from the fly-out menu.
• Select the download link on the right and be sure to download the proper installer for your oper-
ating system.
Note: The Zip File Compressed option is just a compressed version for faster downloading. This file will
need to first be extracted with the appropriate software before installation.
• Save the downloaded file in a convenient location such as your desktop.
• Once downloaded, double click on the file to begin installation of the WinPV software.
Power Vision Quick Start Guide - 5
Next you are given the option to modify
what applications and features the installer
will install.
Note: Dynojet recommends that you do not change
any of the default options or default locations.
• Read the summary of your settings and click
Next to continue.
WINPV SOFTWARE INSTALLATION
• Read the Welcome window and click Next
to continue.
• Carefully read the WinPV license agreement,
check the accept box, and click Next
to continue.
Note: To install WinPV, you must accept this
agreement. If you do not, Setup will close.
• Click Finish to complete the installation.
Continue with the Power Vision Driver
Installation.
Windows Vista and 7 Users
A Windows Security warning will pop up
during the installation process. This is
normal and will install the Power Vision
Device Drivers.
• Click Install to continue.
98100014.07 Toll Free: 1-800-992-4993
• Using the USB cable,
connect the Dynojet Power
Vision to your computer.
• The Found New Hardware
window will open.
• Select Yes, this time only
and click Next.
Power Vision Device Drivers
will be installed during
Software installation.
A Windows Security
warning will pop up during
this process.
• Click Install to continue.
Note: during this process, a
notice on the bottom of your
screen will appear letting you
know the status of the device
driver installation progress.
POWER VISION DRIVER INSTALLATION
• Select Install from a list
or specific location and
click Next.
• Select Search for the best
driver in these locations.
• Verify the location points to
your Power Vision folder in
Program Files.
• Click Next.
• Click Finish to close
the wizard.
• Continue with Checking the
WinPV Update Client.
WINDOWS XP DRIVER INSTALLATION
WINDOWS VISTA AND LATER DRIVER INSTALLATION
Power Vision Quick Start Guide - 7
CHECKING THE WINPV UPDATE CLIENT
• Using the USB cable, connect the Dynojet Power Vision to your computer.
• Click Start on the Windows task bar and
click All Programs.
• Select PowerVision >PV Update Client.
• Right Click on the Metro Start Screen
• Select All apps in the Lower Right corner
• Navigate to the Power Vision Heading and
Select PV Update Client
For Windows 8 only
• Select the desired update to install.
• Click the Download and Install
Selected Updates Button to begin the
update process.
For firmware and Tune database updates;
Once the selected downloads are installed
into the Power Vision, a message will display
if the update was successful or not.
• Click Ok to complete.
For Software and Update Client updates;
Once the updates download, the software
install wizard will be started to install the
newer version of the software.
See page 5 for further details.
The update client will need to be restarted for
any further updates.
The PV Update utility will automatically check for any applicable updates.
The latest versions of the Firmware, Software, Tune Database and any Critical Updates will be
displayed in the right column. Your currently installed version will be displayed in the left column.
PLEASE READ the Update Messages on the top of the window for any critical
updates and follow any direction given there first.
98100014.07 Toll Free: 1-800-992-4993
INSTALLING THE POWER VISION
• Route the Power Vision cable away from any
moving or hot parts.
Dynojet recommends using zip ties to
secure the cable to existing non-moving
components.
• The Power Vision module may be mounted to the bike’s handlebars using mounting hardware.
The Power Vision does not need to remain on the bike.
This installation was done on a 2009 Harley-Davidson Night Rod.
Your bike and set-up may vary.
• Connect the Power Vision to the ECM’s
diagnostic port.
Note: The Power Vision may be damaged if
installed improperly.
The location of the diagnostic port varies depend-
ing on model, so please refer to a service manual
or contact Dynojet for the exact location.
Use caution, many models use the same style con-
nector for accessories, your Power Vision MUST be
connected to the diagnostic port.
FIG. A FIG. B
FIG. DFIG. C
Power Vision Quick Start Guide - 9
2004-2015 Dyna Models
Diagnostic connector is located behind the
Left hand side cover. Connector is Light Grey
in color with black rubber plug installed.
Note: 2001-2011 models are J1850 using the PV-1.
Note: 2012-13 models are CAN, using the PV-2.
2007-2015 Sportster Models
(including XR Models)
Diagnostic connector is located behind the
Left hand side cover. Connector is Light Grey
in color with black rubber plug installed.
2002-2007 Touring Models
Diagnostic connector is located behind the
right hand side cover. Connector is Light
Grey in color with black rubber plug installed.
Note: Requires removing the Right side saddle bag.
2008-2015 Touring Models
Diagnostic connector is located behind the
left hand side cover. Connector is Light Grey
in color with a black rubber plug installed.
Note: Requires removing the Left side saddle bag.
2001-2015 Softail Models
Diagnostic connector is located under
the seat, attached to the frame by the rear
fender. Connector is Light Grey in color, with
black rubber plug installed.
Note: Requires removing the seat.
Note: 2001-2011 models are J1850 using the PV-1.
Note: 2011-2013 CVO models are CAN using the PV-2.
Note: 2012-2013 models are CAN using the PV-2.
2002-2015 V-Rod Models-
Shown on Page 8
Diagnostic connector is located behind the
Right Front frame cover. Connector is Light
Grey in color with black rubber plug installed.
Note: Tools required to access.
DIAGNOSTIC CONNECTOR LOCATIONS
98100014.07 Toll Free: 1-800-992-4993
FLASHING A DYNOJET
PRE-CONFIGURED TUNE FILE
The Power Vision is loaded with Pre-Configured Tunes developed by
Dynojet when it leaves our facility. Dynojet makes every effort to have
a tune file available for your specific combination when you receive your Power Vision
(pre-loaded in the device), but in some cases you’ll need to use the Update Client to ensure you
have the latest tunes available from Dynojet.
You can also visit http://www.flashyourharley.com to search our tune database and
download a tune for your combination.
POWER VISION TUNE FILE MANAGEMENT
There are three types of tunes that can be flashed
to your ECM with the Power Vision:
Flashing your ECM with any one of these types of tunes
will automatically save a backup of your Original Tune, and will
permanently lock the Power Vision to your bike’s ECM.
You can flash your ECM with tunes as many times as you like,
but the Power Vision will only be permitted to flash tunes to
the ECM it’s locked to. The Power Vision’s other features, like
datalogging / monitoring, diagnostics, clearing adaptive values,
etc. will still be available to be used on any bike it was designed for, as well as the bike
it’s locked to.
1. Dynojet
Pre-Configured Tunes
2. Custom Tunes 3. Load Copy
Any combination of the three types of tune files can be placed
in the Tune Manager. There are 6 “slots” in the Tune Manager,
and you can occupy a single slot or all six if you choose.
For example, you could have a Dynojet Pre-Configured Tune
in Slot 1, a Custom Tune in Slot 2, and a Copy of Original Tune
in Slot 3. You can think of the Tune Manager as an area that
“holds” the tunes, or “stages them” prior to the Power Vision
flashing them to your ECM. You can overwrite the tunes that occupy the various slots at any
time, or manage your tune files in the Tune Manager by using the WinPV software.
IMPORTANT:
NOTE:
Otros manuales para Power Vision
7
Tabla de contenidos
Otros manuales de Electrónica del automóvil de Dynojet
