Dwyer Instruments TP2-10 Instrucciones de instalación y funcionamiento

Series TP2 Thermocouple Thermometers

Specifications - Installation and perating Instructions

TE-TP2

DWYER INSTRUMENTS, INC.

Phone: 219/879-8000 www.dwyer-inst.com

P. . B X 373 • MICHIGAN CITY, INDIANA 46360, U.S.A. Fax: 219/872-9057 e-mail: [email protected]

SPECIFICATI NS

Range:

K: -328 to 2372°F (-200 to 1300°C);

J: -202 to 1652°F (-130 to 900°C);

T: -328 to 662°F (-200 to 350°C).

Accuracy:

K: ±0.3% of reading + 1°C;

J/T: ±0.1% of reading + 0.7°C.

Display: 4 digit LCD.

Resolution:

K: 0.1°F/C: -328 to 1202°F (-200 to 650°C); 2°F/1°C (others);

Over 1000°C 1°F/C.

J: 0.1°F/C: -202 to 932°F (-130 to 500°C); 2°F/1°C (others);

T: 0.1°F/C: -328 to 662°F (-200 to 350°C).

Temperature Limits: Ambient -4 to 122°F (-20 to 50°C).

Power Requirements: One CR-2032 lithium battery.

Weight: 3.2 oz (91 g).

Agency Approvals: CE.

The Series TP2 Thermocouple Thermometers can accurately measure a large

temperature range for a wide range of applications including food safety

inspection, lab testing, and HVAC. This hand-held thermometer offers three

models that measure the probe temperature, ambient temperature, and relative

humidity. Additional features include a data hold function, high/low audible alarm,

and auto power off. Device includes a K type probe and battery.

FEATURES

1. Auto power off with disable feature (15 minutes).

2. Data hold function freezes readings on display.

3. Complete with type K bead wire temperature probe and CR2032 battery.

4. °C/°F select function.

5. High/low alarm threshold setting is available.

PERATING INSTRUCTI NS

Please read the manual completely before using this device.

KEY FUNCTI N

1. PWR: Turn on/off the meter or holds current readings.

2. MX/MI/AVG: Cycles between minimum, maximum, and average measurement.

3. M DE: Cycles between probe temperature, ambient temperature and humidity

(depending on model) (TP2-20/TP2-30 only), RH (TP2-30 only). Press and hold for

3 seconds to charge the thermocouple type between K, J, and T (depending on

model) (TP2-10/TP2-20 only).

PERATI N

Power n/ ff

Before powering on the meter, plug the thermocouple probe into the meter. Press

the PWR button to turn on the meter. t will make a beep sound and the full screen

of LCD icons will briefly show on the display. The meter is now in normal

measurement mode. While the meter is on, press and hold the PWR button to turn

off the meter.

Sleep Mode (Auto Power ff)

The meter will turn off automatically after 15 minutes if no buttons are pressed. To

disable the auto power off function, when the meter is off, press and hold the

MX/M /AVG button then press the PWR button to turn on the meter. When the LCD

display shows the following, sleep mode is disabled.

Taking Measurement

Make sure you have plugged the K sensor probe in the meter. f the probe is not

plugged in appropriately, the LCD will show “----” on the display.

[127.00]

1-27/64

[36.30]

45/64

[18.01]

15/16

[23.91]

Data Hold

Press and release the PWR button to freeze the reading. Press and release the

PWR button shortly again, the meter will return to normal measurement.

Change Mode

Press the MODE button to select probe temperature or ambient, air temperature

(TP2-20 & TP2-30) and probe temperature, ambient air temperature or relative

humidity (TP2-30).

Select Probe Type

Press and hold the MODE button more than 3 seconds to select probe type K/J/T

(TP2-10 & TP2-20).

Note: Please check your probe type before selecting this function to ensure a

correct reading.

MAX/MIN/AVG

Press the MX/M /AVG button, MAX icon with the highest reading appears on LCD.

Press the MX/M /AVG button again, M N icon with the lowest reading appears on

the LCD. Press the MX/M /AVG button again, AVG icon appears with average

reading on the LCD. Press the MX/M /AVG button again, then the meter will return

to normal measurement.

Change Unit

When the device is off press the MODE and PWR button at the same time to enter

the setting function. Press the MODE button to select °C or °F. Press the PWR

button again to save the unit.

Alarm Setting

Step 1. Hi Temp. Alarm Select

When the meter is off, press the MODE and PWR button at the same time. Pass

through unit select by pressing power, then press the MODE button to select Hi

Temp. alarm ON or OFF.

a. When Hi Temp. alarm function is on, Press the PWR button to enter Hi Temp.

alarm setting. (Move to Step 2)

b. When alarm function is off, press the PWR button to set Lo Temp. alarm setting.

(Step 3)

Step 2. Hi Temp. Alarm Setting

When Hi Temp. alarm is on, “Hi Set” icons with the default value 50°C (122°F) or

the last setting will appear on the LCD. Keep pressing the MODE button to increase

digit sequentially and release the button when you reach the number desired.

(Please refer to #Example 1). Press the PWR button to save Hi temperature

settings and go to Lo temperature alarm setting.

Note: The default Hi/Lo alarm is off.

Step 3. Lo Temp. Alarm Select

Press the MODE button to select Lo Temp. alarm ON or OFF.

a. When Lo temperature alarm function is on, press the PWR button to enter Lo

Temp. Alarm Setting. (Move to Step 4)

b. When Lo alarm function is off, press the PWR button to go back to normal

measurement.

Step 4. Lo Temp. Alarm Setting

The meter will display a “Lo Set” icon with the default value 0°C (32°F) or the last

setting on the LCD. Keep pressing the MODE button to increase digit sequentially

until you have reached the number desired. (Please refer to #Example 1). Press the

PWR button to save Lo Temp. settings, and go back to normal measurement.

Example 1 - Set Hi Temp. Alarm at 1283°C

Error Messages

Note: f above error messages appear on your display, please contact Dwyer

nstruments, nc. for technical service.

MAINTENANCE/REPAIR

Upon final installation of the Series TP2, no routine maintenance is required. The

Series TP2 is not field serviceable and should be returned if repair is needed. Field

repair should not be attempted and may void warranty.

WARRANTY/RETURN

Refer to “Terms and Conditions of Sales” in our catalog and on our website. Contact

customer service to receive a Return Goods Authorization number before shipping

the product back for repair. Be sure to include a brief description of the problem

plus any additional application notes.

Step 1:

Keep pressing the MODE button, the numbers will

cycle from 0 to 9. t will jump to the next digit to

the right when the desired number (0 to 9) is

reached. So for this example, we need a “1” in the

thousand unit column. When the number desired

is reached, it will jump to the next digit to the right.

Step 2:

Keep pressing the MODE button, the same action

as before until the hundreds digit shows ”2". Then

release the MODE button.

Step 3:

Keep pressing the MODE button, the same action

as before until the tens digit shows “8”. Then

release the MODE button.

Step 4:

Keep pressing the MODE button, the same action

as before until the last unit digit shows “3”. Then

release the MODE button.

E-2

E-3

E-4

E-5

E-6

Humidity sensor is failed.

Temperature sensor is failed.

Operation temperature is too high.

Operation temperature is too low.

Some hardware has failed.

DWYER INSTRUMENTS, INC.

Phone: 219/879-8000 www.dwyer-inst.com

P. . B X 373 • MICHIGAN CITY, INDIANA 46360, U.S.A. Fax: 219/872-9057 e-mail: [email protected]

Este manual sirve para los siguientes modelos

Otros manuales de Instrumento de medición de Dwyer Instruments

Dwyer Instruments

Dwyer Instruments 450A-1 Instrucciones de instalación y funcionamiento

Dwyer Instruments

Dwyer Instruments PUX2 Manual de usuario

Dwyer Instruments

Dwyer Instruments RTI2 Series Manual de usuario

Dwyer Instruments

Dwyer Instruments SAH-22-IN Manual de usuario

Dwyer Instruments

Dwyer Instruments VP2 Instrucciones de instalación y funcionamiento

Dwyer Instruments

Dwyer Instruments StabiliSENSE RPMC Series Instrucciones de instalación y funcionamiento

Dwyer Instruments

Dwyer Instruments EMMA Manual de usuario

Dwyer Instruments

Dwyer Instruments Series 2-5000 Minihelic II Instrucciones de instalación y funcionamiento

Dwyer Instruments

Dwyer Instruments Series APM Manual de usuario

Dwyer Instruments

Dwyer Instruments THI-10 Instrucciones de instalación y funcionamiento

Dwyer Instruments

Dwyer Instruments 605-00N Instrucciones de instalación y funcionamiento

Dwyer Instruments

Dwyer Instruments 1207A Manual de usuario

Dwyer Instruments

Dwyer Instruments SPPM Series Instrucciones de instalación y funcionamiento

Dwyer Instruments

Dwyer Instruments WSM-10 Manual de usuario

Dwyer Instruments

Dwyer Instruments A-464 Manual de usuario

Dwyer Instruments

Dwyer Instruments WT2-10 Instrucciones de instalación y funcionamiento

Dwyer Instruments

Dwyer Instruments Magnehelic 2000 Series Manual de usuario

Dwyer Instruments

Dwyer Instruments TM2 Series Manual de usuario

Dwyer Instruments

Dwyer Instruments 477-000-FM Manual de usuario

Dwyer Instruments

Dwyer Instruments PUB Series Manual de usuario

Dwyer Instruments

Dwyer Instruments HF series Instrucciones de instalación y funcionamiento

Dwyer Instruments

Dwyer Instruments MAFS Series Manual de usuario

Dwyer Instruments

Dwyer Instruments 450A-1 Instrucciones de instalación y funcionamiento

Dwyer Instruments

Dwyer Instruments A-705-20 Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario