DuraLabel Kodiak Manual de usuario

800.788.5572

DuraLabel.com

QUICKSTART GUIDE

2| 1. Getting to Know Your Kodiak DuraLabel.com | 800.788.5572

Kodiak Quickstart Guide

This document will help you quickly get started using your new DuraLabel Kodiak printer.

For more information, see your Kodiak User Guide, or contact Graphic Products by

calling 800.788.5572 or visiting GraphicProducts.com.

1. Getting to Know Your Kodiak

FRONT VIEW: BACK VIEW:

1. Print Button: Print one copy of the

current label

2. X (Cancel) Button: Cancel the

current print job

3. ? (Help) Button: Open the help

window for the current program

4. USB Ports: Connect wireless

keyboard adapter here

5. Adjustable Touchscreen: Stylus (not

required) is stowed in the lower right

corner

6. Cutter Slot: Finished labels will come

out here

1. Power Socket

2. Power Switch

3. USB-B Port

4. Ethernet Port

5. Additional USB Ports (behind

removable panel)

1 2 3 54 6 1 2 3 54

DuraLabel.com | 800.788.5572 1. Getting to Know Your Kodiak | 3

KODIAK QUICKSTART GUIDE

INSIDE:

1. Supply Sensor

2. Adjustable Supply Guides

3. Supply Holder Adjustment Tab

4. Adjustable Supply Holders

5. Print Heads and Latches (2)

6. Feed Roller Bar and Latch

7. Ribbon Cartridges (2)

1 2 3 4

5 6 7

4| 2. Setup and Supply Loading DuraLabel.com | 800.788.5572

KODIAK QUICKSTART GUIDE

2. Setup and Supply Loading

Kodiak weighs about 42 pounds (about 20 kilograms). We recommend having two

people work together to unpack or reposition the printer.

You will need one roll of label stock and two loaded ribbon cartridges in order to print.

INITIAL SETUP

1. Set Kodiak on a flat, stable surface. You will normally need access to the front of the

system (with the touchscreen) and the right side (where the black lid has a handle).

2. Note that the power switch and the socket for the power cord are both located on

the back of the system.

3. Raise the lid to its fully-upright position, where it will hold.

4. Remove the keyboard from its storage location in the lid, plug the wireless keyboard

adapter into one of Kodiak’s USB ports, and set the keyboard aside.

LOAD LABEL STOCK

1. Squeeze the orange tab on the adjustable supply holder, and slide the holder to the

mark for your label stock’s width.

2. Rest the gears on the ends of the supply’s end caps into the slots on the supply

holders. The end cap with a Kodiak label should face you.

3. Unlatch the feed roller bar and let it rise out of the way. Pull the end of your label

stock forward and under this bar.

4. Slide the adjustable supply guides so that your label stock will fit under the white

rollers. Push the label stock forward, under the metal guide with the orange sensor.

5. Lower and latch the feed roller bar.

DuraLabel.com | 800.788.5572 2. Setup and Supply Loading | 5

KODIAK QUICKSTART GUIDE

LOAD RIBBON INTO RIBBON CARTRIDGE

1. Insert an empty take-up roll (with orange toothed ends) into the top of an empty

ribbon cartridge.

2. Locate the arrow on the end cap of a fresh roll of ribbon. Align this arrow with the

arrow on the side of the ribbon cartridge. Slide the ribbon roll into place.

3. Begin unwinding the ribbon from its fresh roll. Pull the end of the ribbon down, under

the bottom of the cartridge, and up to the empty take-up roll.

4. Adhere the end of the ribbon to the take-up roll. Turn the take-up roll to remove any slack.

INSTALL RIBBON CARTRIDGE INTO KODIAK

1. Unlatch one of the print heads and raise it by its orange tab until it clicks into

position, where it will hold.

2. Hold a loaded ribbon cartridge so the handle faces you, the two legs of the cartridge

are on either side of the print head, and the loose ribbon at the bottom of the

cartridge is below the print head.

3. Slide the cartridge onto the rails of the print head. It should slide smoothly back until

the number on the print head is visible; you may hear the cartridge click into place.

4. Lower the print head by its orange tab, and latch it down.

5. Repeat the ribbon loading process for both ribbons that you will use. If you are using

a black ribbon, place it on print head 2.

Once your supplies are loaded, close the lid and turn on your Kodiak.

6| 3. Navigating Kodiak Software DuraLabel.com | 800.788.5572

KODIAK QUICKSTART GUIDE

3. Navigating Kodiak Software

While your Kodiak is starting up, you will see a logo screen and hear the motors

initialize. Then, the Kodiak Home Screen will appear.

KODIAK HOME SCREEN:

1. Home Button

2. Hamburger Menu

3. Desktop Area

4. Supply/Ribbon Information

5. Printing Preferences/Status

6. Network Settings

7. Date/Time

8. Main Menu

4 5 6 7

Kodiak includes five labeling software modules. Label Designer offers freedom and

control for fully customized labels and signs; the other four modules provide simple and

powerful ways to create specific types of labels.

DuraLabel.com | 800.788.5572 3. Navigating Kodiak Software | 7

KODIAK QUICKSTART GUIDE

LABEL DESIGNER:

Design new signs or labels from scratch, or modify existing designs.

1. Toolbar

2. Design Area

3. Insert menu

4. Dimensions menu

5. Order menu

6. Details menu

7. Color menu

8. Data Source menu

9. Label Settings menu

10. Print Settings menu

1 2 3 4 5 6 7

IN THE TOOLBAR:

1. Hamburger Menu

2. Quick Save

3. Group/Ungroup

4. Undo and Redo

5. Copy, Paste, and Delete

6. Zoom In/Out/Fit to Screen

7. Close Program

8| 3. Navigating Kodiak Software DuraLabel.com | 800.788.5572

KODIAK QUICKSTART GUIDE

ARC FLASH

Enter data for specialized electrical safety signage, and print labels that comply with the

NFPA 70E and CSA Z462 standards.

1 2 3 4 5

IN THE TOOLBAR:

1. Hamburger Menu

2. Search Records

3. Record Number

4. Zoom In/Out/Fit to Screen

5. Close

1. Toolbar

2. Design Area

3. New Record

4. Edit Record

5. Save Database button

6. Save Label button

7. Delete Record button

8. Label Settings menu

9. Print Settings menu

DuraLabel.com | 800.788.5572 3. Navigating Kodiak Software | 9

KODIAK QUICKSTART GUIDE

CHEMICAL LABELING

Create GHS-style chemical labels for safety and compliance, using an editable database

of chemical details. Labels can follow HazCom 2012 (United States) or international

GHS (UN) formats.

1. Toolbar

2. Design Area

3. New Record

4. Edit Record

5. Save Database

6. Save Label

7. Delete Record

8. Label Settings

9. Print Settings

IN THE TOOLBAR:

1. Hamburger Menu

2. Country/Authority Menu

3. Search Records

4. Record Number

5. Zoom In/Out/Fit to Screen

6. Close

1 2 3 4 5 6

10 | 3. Navigating Kodiak Software DuraLabel.com | 800.788.5572

KODIAK QUICKSTART GUIDE

NFPA/RTK

Create supplemental chemical labels with the NFPA 704 hazard ratings, using an

editable database of chemical details.

IN THE TOOLBAR:

1. Toolbar

2. Design Area

3. New Record

4. Edit Record

5. Save Database

6. Save Label

7. Delete Record

8. Label Settings

9. Print Settings

1 2 3 4 5 6

1. Hamburger Menu

2. Authority Menu

3. Search Records

4. Record Number

5. Zoom In/Out/Fit to Screen

6. Close

Otros manuales para Kodiak

Tabla de contenidos

Otros manuales de Etiquetadora de DuraLabel

DuraLabel

DuraLabel Catalyst Manual de usuario

DuraLabel

DuraLabel Bronco Manual de usuario

DuraLabel

DuraLabel 4000 Manual de usuario

DuraLabel

DuraLabel Lobo Manual de usuario

DuraLabel

DuraLabel Kodiak Manual de usuario

DuraLabel

DuraLabel Bronco Manual de usuario

DuraLabel

DuraLabel 7000 Manual de usuario

DuraLabel

DuraLabel Bronco Manual de usuario

DuraLabel

DuraLabel Toro Manual de usuario

DuraLabel

DuraLabel PRO 300 Manual de usuario

DuraLabel

DuraLabel LabPRO Manual de usuario

DuraLabel

DuraLabel LabPRO Manual de usuario

DuraLabel

DuraLabel Toro Manual de usuario

DuraLabel

DuraLabel 9000 Manual de usuario

DuraLabel

DuraLabel Kodiak Manual de usuario

DuraLabel

DuraLabel 2000 PLUS Manual de usuario

DuraLabel

DuraLabel Bronco Manual de usuario

Manuales populares de Etiquetadora de otras marcas

Brother

Brother P-Touch 2420PC Manual de usuario

newell

newell Dymo LabelManager 210D Manual de usuario

Brother

Brother TD-4000 Manual de usuario

U-Line

U-Line BROTHER H-8754 Manual de usuario

Tharo Systems

Tharo Systems H-435+ Manual de usuario

Brother

Brother E300 Manual de usuario

Godex

Godex RT700 SERIES Manual de usuario

ID Technology

ID Technology 252 Manual de usuario

Labelmate

Labelmate MC-11 Manual de usuario

CAB

CAB XD4M/300 Manual de usuario

Avery Dennison

Avery Dennison Pathfinder 6057 Manual de servicio

Brother

Brother P-touch PT-9700PC Manual de usuario

TSC

TSC PEX1000 Series Manual de usuario

Adkins

Adkins Label Master Manual de usuario

Epson

Epson LabelWorks LW-400 Manual de usuario

Primera

Primera 510212 Manual de usuario

Brady

Brady BradyPrinter S3100 Manual de usuario

Novexx Solutions

Novexx Solutions XLP 604 Manual de usuario