Duplo DocuCutter DPC-400 Manual de usuario

DocuCutter DPC-400

Digital Die Cutter

Operation Manual

Revision: 111519AP

CONTENTS

1. User Notes

………………………………………………………………………………

3-6

2. Frame and Parts

…………………………………………………………………………

2-1 List of Parts (1)

………………………………………………………………………

2-2 CUTTER FRAME-

………………………………………………………………………

2-3 CUTTER FRAME-

………………………………………………………………………

2-4 CUTTER FRAME-

………………………………………………………………………

2-5 Sheets Pre-load Platform

…………………

…………………………………………

3. Operation guide

…………………………………

………………………………………

3-1 Installation

…………………………………………………………………………

3-2 Cutting Tools Installation

……………………………………………………………

3-3 Turn on/off

…………………………………………………………………………

3-4 Cut Depth and Tools Selection Setting

………………………………………………

3-5 Offset for Creasing Wheel Tool

……………………………………………………

3-6 Data Transmission Settings

…………………………………………………………

3-7 Camera Settings

………………………………………………………………………

17-18

4. SOFTWARE

…………………………………………………………………………

……

19-22

4-1 Software Installation

…………………………………………………………………

4-2 Print Setup

……………………………………………………………………………

20-21

4-3 Print Files

……………………………………………………………………………

22-24

4-4 Camera Registration

…………………………………………………………………

25-26

5. Function Setup

……………………………………………………………………………

27-33

Cutter reset interface

………………………………………………………………………

5-1 TEST

…………………………………………………………………………………

5-2 Setup

…………………………………………………………………………………

28-32

5-3 Suction

…………………………………………………………………………………

5-4 Reset

……………………………………………………………………………………

5-5 Enter

……………………………………………………………………………………

5-6 Communication

……………………………………………………………………

…

6. Q & A of Alarms

……………………………………………………………………………

7. Maintenance

……………………………………………………………………………

8. Specification

……………………………………………………………………………

Warranty

……………………………………………………

………………………………

1. User Notes

1>SAFETY RULES

After receiving the machine, if end users require any further modification or change of one part or

several parts of the machines, they are obligated to advise the machines back to the manufacture for

this treatment.

We do not have any legal responsibilities if the breakdown of the machines or operator’s injuries is

caused by the importer’s modifications or changes to one part or several parts of the machines

performed by end users.

The machine has many safety features which make it a safe machine to operate. Regardless of your

experience, safety instructions must be read carefully, completely understood, and applied to your

daily work habits. If you do not understand or are confused by certain safety instructions presented in

this manual, discuss them with your supervisor. Machine setup, cleanup, and maintenance operation

will vary. Therefore, it is essential all employees to practice safe work habits. SAFE WORK HABITS

PREVENT INJURIES. The main rule to follow is to ALWAYS make sure the main drive is STOPPED and

LOCKEDOUT when performing setup, cleanup, and maintenance operations.

The safety precautions in this manual provide guidelines for the protection and for that of fellow

workers.

1.1 Precautions

Before any maintenance is performed on the machine, switch off all sources of energy, electrical, do

not operate the equipment when panels and safety guards are not in place. Failure to observe this

warning could result in personal injury.

1.2 Avoid Accidents

Most accidents are caused by the failure of some individual to follow simple and fundamental safety

rules and precautions. For this reason, most accidents can be prevented by recognizing the real cause

and doing something about it before the accident occurs. With any machinery, a careful and trained

operator is the best insurance against an accident.

1.3 Safety Issues & General Safety Rules

DO DO NOT

1. Read and understand this manual before

attempting to operate or service the

machine.

1. Do not attempt to operate or service the machine

without reading and understanding this manual.

2. Be familiar with the machine safety rules

and practices.

2. Do not remove the safety devices. Including

electrical interlocks.

3. In case of an accident while the machine, is

running press the emergency stop button to

stop the machine.

3. Do not start the machine unless you are sure there is

no danger to you or your fellow workers.

4. Warn others of an intended action that may

endanger them.

4. Do not clean or lubricate moving parts of a machine

that is running.

5. Perform lubrication and oiling of the

machine only when it is stopped.

5. Do not unauthorized persons to operate the

machinery.

6. Verify that all guards are installed before

operating the machine.

6. Do not wear jewelry, neckties, or loose clothing near

moving machine.

7. When working on electrical equipment,

power must be shut off to all circuits before

any work is attempted. Individual switches

must be opened, and the equipment circuits

tested to make sure there is no power.

7. Do not place tools on a machine that is running.

8. Be sure all operators are aware of all areas

and operations that require extra safety

measures.

8. Do not reach into the machine to make adjust while

it is running.

9. Keep the floor clean around the machine. 9. Do not use a rag on rotating rollers. Do not use any

cleaning cloths or paper on rotating rollers

10. Keep aisles and walkways clear. 10. Do not have anything (coins, pens, etc.) in your

pockets.

11. Return tools to their proper places after

use.

11. Do not allow horseplay in the work area.

2.INTRODUCTION

2.1What is the DocuCutter DPC-400 Does

DocuCutter DPC-400 is design for cutting and creasing to the digital printed material, such as

labels, cards and packing cartons on demand.

2.2 Symbol Description

This manual’s symbols correspond to the specific area on the machine. These safety warnings are

placed to protect both the user and anyone within the machine’s vicinity. These are also

positioned to ensure that the machine is operated properly and safely. Each symbol and its

meanings are explained below.

Keep your hands away. Something heavy might fall

from above.

Be careful of high voltage or the risk of electric shock.

Power Switch

Be careful of rollers and keep your hands away.

CAUTION

Be careful of UV light. Do not look directly into the

beam or view directly with any optical instruments.

Be careful of touching the blades. The blades are

extremely sharp which could result in a serious injury

when coming into play with hands or other parts of

the body

2.3 Name Plate

2.4 USAGE PRECAUTIONS

2.4.1 Before Operation

a. Understand emergency stop button and main power location. In addition, normal

operation must be confirmed.

b. Tools and sundries should not be put on the machine.

c. No obstacles should surround or be placed on top of the machine.

d. Personnel staying in risk areas are forbidden.

e. Do not place any liquids on top of the machine

2.4.2 During Operation

a. Do not open any doors or guards.

b. No personnel in risk areas.

c. No maintenance and repair.

2.5.3 Maintenance

a. Power must be turned off before leaving the machine.

b. The location of each limited switch is identified.

c. Power must be turned off when personnel enter risk areas.

d. Check all buttons and switches are in the normal position.

e. Switches must be turned off before opening any door/guards.

2.5.4 Others

a. Damaging all external and internal panels and controls is forbidden.

b. Do not cover each button and switch.

c. The machine should be kept clean at all time.

d. Warning signs and tags on the machine should not be removed or destroyed. If you

have any questions, please contact your agent or dealer.

2. Frame and Parts

2-1 List of Parts (1)

Caution:

Check items listed above before installation

The tools and blades listed above is a standard offer, tools and blades vary based on specific

offers. Please check with your supplier if you have any questions.

The photos above are for reference only. The tools and blades listed above subject to

change without notice.

Name Photo Qty’ Name Photo Qty’

Ethernet cable

10m Grounding

cable

Creasing

wheel

1 Power

supply cable

Straight

screwdriver 1 Dongle

Picture knife

1 screw

dozens

Allen wrench 1 Pipe clamp 5

2-2 CUTTER FRAME-

2-3 CUTTER FRAME

2-4 CUTTER FRAME-

2-5 Sheets Pre-load Platform

Tabla de contenidos

Otros manuales de Cortador de Duplo

Duplo

Duplo DC-646 Manual de usuario

Duplo

Duplo DocuCutter CC-229 Instrucciones de construcción

Duplo

Duplo DC-535 Manual de usuario

Duplo

Duplo DocuCutter DC-545HC Manual de usuario

Duplo

Duplo DC-618 Manual de usuario

Duplo

Duplo DocuCutter CC-229 Guía de inicio rápido

Duplo

Duplo DocuCutter CC-330 Instrucciones de construcción

Duplo

Duplo DC-646 Manual de usuario

Duplo

Duplo DC-618 Manual de usuario

Duplo

Duplo DocuCutter DC-545 Guía de instalación

Duplo

Duplo DocuCutter CC-330 Guía de inicio rápido

Duplo

Duplo DocuCutter CC-228 Instrucciones de construcción

Manuales populares de Cortador de otras marcas

Milwaukee

Milwaukee HEAVY DUTY M12 FCOT Manual de usuario

Makita

Makita DCS552 Manual de usuario

SignWarehouse.com

SignWarehouse.com Bobcat BA-60 Manual de usuario

Makita

Makita 4112HS Manual de usuario

GEISMAR STUMEC

GEISMAR STUMEC MTZ 350S Manual de usuario

Hitachi

Hitachi CM 4SB2 Guía de solución de problemas

Dexter Laundry

Dexter Laundry 800ETC1-20030.1 Manual de usuario

GCC Technologies

GCC Technologies AFJ-24S Manual de usuario

DeWalt

DeWalt XR LI-ION DCS350N Manual de usuario

Baudat

Baudat ES1 Manual de usuario

Mafell

Mafell ZAF 200 Guía

Makita

Makita 4100NH Manual de usuario

Formax

Formax FD 574 Manual de usuario

EINHELL

EINHELL TE-MA 1500 Manual de usuario

Husqvarna

Husqvarna Cut-n-Break K 760 Manual de usuario

CLEAN ROOM DEVICES

CLEAN ROOM DEVICES CRD130SS Manual de usuario

TRI tool

TRI tool 301A Manual de usuario

Roller

Roller King 1 1/4 Manual de usuario