DRIFT GHOST N2 Manual de usuario
Version 1.0.0.1 Date: 2022-01-22
GHOST N2 QUICK GUIDE
Thank you for purchasing the Drift GHOST N2
CUSTOMER SUPPORT
Download the full manual and check our official website for firmware updates, customer support, and
info on all of our products.
https://driftinnovation.com/
If you have any suggestions, comments or concerns; please contact our customer support team at:
sales@driftinnovation.com
WARRANTY
Warranty does not apply if the product is damaged due to physical abuse, mishandling, accident, fire,
frostbite, water damage, negligence or failure to follow the supplied operating instructions. For more
information on warranty, see:
https://driftinnovation.com/warranty
CONTENTS
1. Product Specification
2. Package Contents
3. Installing the Module
4. About your Camera
5. Features Overview
6. Drift Link App
7. How to Access Real-Time Video (for developer)
8. Remote Control & Setup (for developer)
9. Auto Detection in a Network (for developer)
Version 1.0.0.1 Date: 2022-01-22
1. Product Specification:
Recording Resolution
4K(4096*2160 17:9) : 24/25FPS
4KUHD(3840*2160, 16:9): 24/25/30FPS
2.7K(2704*1520, 16:9): 25/30/50FPS
1080P(1920*1080,16:9): 24/25/30/50/60/100/120FPS
720P(1280*720, 16:9): 25/30/50/60/200/240FPS
WVGA(854*480, 16:9) 25/30FPS
Livestream Resolution
1080P(1920*1080,16:9): 30/60FPS
720P(1280*720, 16:9): 30/60FPS
WVGA(854*480, 16:9): 30FPS
Livestream bitrate：adjustable，8Mbps maximum
Livestream protocol：RTSP, RTMP, H.264
Mic：Internal and External
USB ：Mini USB
Size：43（W）* 82.2（L）* 31.4（H）mm
Weight：140g
Version 1.0.0.1 Date: 2022-01-22
2. Package Contents
Ghost 4K+ Camera
Image Transmission Module
Accessories bag
Antenna
Power/Audio 2-in-1 Cable
Mini USB Cable
Version 1.0.0.1 Date: 2022-01-22
3. Installing the Image Transmission Module
1. Remove the original battery module from your Ghost 4K+ camera.
2. Place the Image Transmission Module on the camera body, ensuring that the module’s 30pin
connector is above the camera’s female connector, press down on both ends simultaneously till
the module clicks into place.
3. Install the Antenna on the module, now your Ghost N2 is ready for use.
Reminder: when using the Ghost N2, please supply power on the USB port through the Power/Audio
2-in-1 Cable, since the camera could consume 1.5A current in peak period, camera may not work
properly if the 2-in-1 cable (with external power) not applied.
Version 1.0.0.1 Date: 2022-01-22
4. About your camera
Power On/Off
Connect your Ghost N2 with External Power through the Power/Audio 2-in-1 cable, the camera will
be automatically powered on, remove the external power from camera, it will automatically power
off.
Mode Navigation
Press button to toggle between Video mode and Settings mode.
Settings mode:
(Blue LED) In this mode you can setup your livestreaming or HD record parameters. Press to
scroll down through the menu options, or press and hold to navigate up. Use to change
options for the highlighted setting. At any time, press the button to return to Video mode.
HD Record On/Off
Field Of View 140/115/90
Exposure 0/1/2/-1/-2
Bitrate High/Middle/Low
Filters Normal/Vivid/Low Light
ISO Sensitivity Auto/100/200/400/800
Video Stabilization On/Off
Microphone Front/Rear
Microphone Sensitivity 0/1/2/3/4/5
Speaker Volume Off/Low/Med/High
LED Indicator On/Off
Indicator Timer Off/5s/10s/20s/1m
Date YY-MM-DD
Date Stamp On/Off
Camera off Never/2m/5m/10m/20m
Language EN/CN/FR/GE/IT/SP
Reset Settings Yes/No
Format SD Card Yes/No
Serial Number xxxxxx
Firmware Version x.x.x.x
Version 1.0.0.1 Date: 2022-01-22
5. Features Overview
HD Record mode
In the menu, set HD video as On from your camera’s settings menu, your camera is mainly for
recording, while the stream video will only be used for preview (resolution fixed as 480P), you can
control the camera to record by the physical Record button on cam, or through Drift Link App remotely,
in this settings, camera can record up to 4K resolution.
Live stream mode
In the menu, set HD video as Off from your camera’s settings menu, your camera will be in
Livestream mode, by setting to this mode, you can remotely setup various livestream resolution,
however, you can not to do local recording in this mode.
Connect to the network
To connect your camera into a network for livestream or remote control, you need to manually put
a script file on the root directory of Micro SD card.
Create a file named as fmcom.conf on your computer, using Notepad to open it and write in
below contents, please change the value of router_ssid, router_password according to yours, once
finished, save it and copy to the root directory of camera’s memory card, please note you can setup
the stream resolution/bitrate according to your network quality, options of resolutions include
1080P,720P, bitrate is recommended between 1000000 – 8000000.
Reminder: please make sure the suffix of the script file is kept as original .conf, if you saved it
as .txt file, it wouldn’t work as expected.
Example contents in the script file for local network connection (using RTSP protocol)
router_ssid=RD-TEST_5G
router_password=foream123
stream_resolution=1080P
stream_bitrate=4000000
stream_framerate=30
stream_type=rtsp
Example contents in the script file for livestreaming to cloud (using RTMP protocol), in order to stream
to your platform, you need to acquire the RTMP URL and setup in the line of “rtmp_url=”.
router_ssid= RD-TEST_5G
router_password= foream123
stream_resolution=1080P
Version 1.0.0.1 Date: 2022-01-22
stream_gop=30
stream_bitrate=4000000
stream_framerate=30
stream_audio=1
rtmp_url=rtmp://xxxxxxx
rtmp_cbr=0
once the script file is saved on the memory card, remove the camera from computer, plug in the
external power on the USB port through the 2-in-1 Power/Audio cable, the camera will be powered on,
and connect to the router automatically. once it’s connected, the Wi-Fi LED (above real screen) will
be solid green, and you can see the IP address (the fourth 8-bit field) on the rear screen as the
following.
Version 1.0.0.1 Date: 2022-01-22
6. Drift Link App
From your mobile’s browser, scan below QR code to download and install Drift Link App
Once installed, conenct your mobile to the same network as what Ghost N2 connected, turn on the
App, you should see the camera appeared on the list, marked with a Red block, you can also see the
basic info of the camera including IP address, resolution, battery, and remaining space on the
memory card, tap on the camera box, you will be brought to to the preview page, from where you can
control the camera remotely, e.g. zoom in/out, adjust Filter, Exposure and Mic sensitivity.
Version 1.0.0.1 Date: 2022-01-22
Drift Link is a tool in order to manipulate the camera remotely, if you need to do livestream, you can
use your computer to access the network stream by input the URL as : rtsp://IP address/live, where
IP address is your cam’s IP, for example, if your camera is with this address:192.168.5.22, you can
access the camera live feed by : rtsp://192.168.5.22/live.
Once the live feed is on your computer, you can broadcast it to the Internet through your PC tool.
Connecting to a PC
1. Connect the camera using the USB cable (provided); the camera screen will show a USB icon.
2. The camera’s folder may open automatically; if not, open using My Computer.
3. The camera should be recognised as a removable disk; double-click to open.
4. Open the DCIM folder to access your files.
Connecting to a Mac
1. Connect the camera using the USB cable (provided); the camera screen will show a USB icon.
2. The camera’s folder may open automatically; if not, open using Finder.
3. The camera should be recognised as an external device; double-click to open.
4. Open the DCIM folder to access your files.
Version 1.0.0.1 Date: 2022-01-22
7. How to access real-time video from your camera (for
developers)
1. Find the default router gateway of your network: From a computer in the same network, click
“Start”, type “cmd” and press “Enter” to open the Command Prompt window. Type “ipconfig” and
press “Enter” and you should find the Default Gateway, for example 192.168.4.1.
2. Look at your camera’s rear screen, you should see something like rtsp xxx. The 3 digits following
“rtsp” are the last 8 bits of your IP address, for example, 148. Now you have your camera’s IP
address as 192.168.4.148.
Lots of PC software can play live video through an RTSP address, such as VLC or Blue Iris. Take
VLC as example.
1) Open VLC on your PC, navigate to media / open network streaming, input below texts
“rtsp://192.168.4.148/live” in the URL dialog , where "192.168.4.148" is your camera’s IP address.
2) Click on the “Play” button, you should see the live video from your camera instantly.
Tabla de contenidos
Otros manuales de Cámara de acción de DRIFT
DRIFT
DRIFT GHOST 4K+ Manual de usuario
DRIFT
DRIFT HD720 Manual de usuario
DRIFT
DRIFT HD170 Manual de usuario
DRIFT
DRIFT HD170 Manual de usuario
DRIFT
DRIFT HD Ghost Manual de usuario
DRIFT
DRIFT GHOST 4K Manual de usuario
DRIFT
DRIFT HD170 Manual de usuario
DRIFT
DRIFT Drift-HD720 Manual de usuario
DRIFT
DRIFT Stealth 2 Manual de usuario
DRIFT
DRIFT HD Manual de usuario
