Draper Expert 19106 Guía del usuario
19106
BRITISH
MADE
This document is part of the product, keep it for the life of the product passing it on to any subsequent holder of
the product. Read all information before operating product.
This guide has been compiled by Draper Tools describing the purpose for which the product has been designed,
and contains necessary information to ensure its correct and safe use. By following the information contained in
this guide, it will ensure both product and operator safety, together with longer life of the product itself.
AlI photographs and drawings in this guide are supplied by Draper Tools to help illustrate the operation of the
product.
Whilst every effort has been made to ensure the accuracy of information contained in this guide, the Draper
Tools policy of continuous improvement determines the right to make modifications without prior warning.
APPLICATION GUIDE FOR:
ENGINE
TIMING KIT
1. TITLE PAGE
1.2 REVISIONS:
Date first published June 2018.
Second published September 2019.
- 2 -
As our user manuals are continually updated, users should make sure that they use
the very latest version.
Downloads are available from: http://drapertools.com
Draper Tools Limited
Hursley Road
Chandler’s Ford
Eastleigh
Hampshire
SO53 1YF
UK
Website: drapertools.com
Product Helpline: +44 (0) 23 8049 4344
General Fax: +44 (0) 23 8026 0784
1.3 UNDERSTANDING THIS GUIDES SAFETY CONTENT:
WARNING! – Information that draws attention to the risk of injury or death.
CAUTION! – Information that draws attention to the risk of damage to the product or
surroundings.
1.4 COPYRIGHT © NOTICE:
Copyright © Draper Tools Limited.
Permission is granted to reproduce this publication for personal and educational use
only. Commercial copying, redistribution, hiring or lending is prohibited.
No part of this publication may be stored in a retrieval system or transmitted in any
other form or means without written permission from Draper Tools Limited.
In all cases this copyright notice must remain intact.
1.1 INTRODUCTION:
USER GUIDE FOR: Engine Timing Kit
Stock No: 19106
Part No: ETK232
2. CONTENTS
- 3 -
1. TITLE PAGE
1.1 INTRODUCTION..........................................................................................................2
1.2 REVISION HISTORY ..................................................................................................2
1.3 UNDERSTANDING THIS GUIDE.................................................................................2
1.4 COPYRIGHT NOTICE ................................................................................................. 2
2. CONTENTS
2.1 CONTENTS ....................................................................................................................3
3 WARRANTY
3.1 WARRANTY.................................................................................................................4
4. GENERAL PRODUCT INFORMATION
4.1 GENERAL PRODUCT INFORMATION ....................................................................... 5
5. HEALTH AND SAFETY INFORMATION
5.1 GENERAL SAFETY INSTRUCTIONS FOR USE
Personal safety...........................................................................................................6
6. CONTENTS
6.1 PARTS DRAWING AND LISTING ............................................................................... 7
7. APPLICATION
7.1 PRODUCT APPLICATION AND COMPATIBILITY LISTING ...................................... 8
8. PREPARATION
8.1 ADVISORIES BEFORE USE ...................................................................................... 9
9. PROCEDURE AND APPLICATION GUIDE
9.1 APPLICATION GUIDANCE........................................................................................10
10. EXPLANATION OF SYMBOLS
10.1 EXPLANATION OF SYMBOLS .................................................................................. 11
3. WARRANTY
3.1 WARRANTY
Draper tools have been carefully tested and inspected before shipment and are guaranteed to be
free from defective materials and workmanship.
Should the tool develop a fault, please return the complete tool to your nearest distributor or
contact
Draper Tools Limited, Chandler's Ford, Eastleigh, Hampshire, SO53 1YF. England.
Telephone Sales Desk: (023) 8049 4333 or Product Help Line (023) 8049 4344.
A proof of purchase must be provided with the tool.
If upon inspection it is found that the fault occurring is due to defective materials or workmanship,
repairs will be carried out free of charge. This warranty period covering labour is 12 months from
the date of purchase except where tools are hired out when the warranty period is 90 days from
the date of purchase. The warranty is extended to 12 months for parts only. This warranty does not
apply to any consumable parts, any type of battery or normal wear and tear, nor does it cover any
damage caused by misuse, careless or unsafe handling, alterations, accidents, or repairs
attempted or made by any personnel other than the authorised Draper warranty repair agent.
Note: If the tool is found not to be within the terms of warranty, repairs and carriage charges will
be quoted and made accordingly.
This warranty applies in lieu of any other warranty expressed or implied and variations of its terms
are not authorised.
Your Draper warranty is not effective unless you can produce upon request a dated receipt or
invoice to verify your proof of purchase within the warranty period.
Please note that this warranty is an additional benefit and does not affect your statutory rights.
Draper Tools Limited.
- 4 -
4. GENERAL PRODUCT INFORMATION
This product is designed to be used correctly and with care for the purpose for which it is intended.
No liability is accepted by Draper Tools Limited for incorrect use or application of any of our
products, and Draper Tools Limited cannot be held responsible for any damage to personnel,
property or equipment when using this product. Incorrect use will also invalidate any warranty.
The applications database and any instructional information provided has been designed to offer
general guidance for a particular product’s use and while all attention is given to the accuracy of
the data, no project should be attempted without referring first to the manufacturer’s technical
documentation (workshop or instruction manual) or the use of a recognised authority such as
Autodata.
It is our policy to continually improve our products and thus we reserve the right to alter
specifications and components without prior notice. It is the responsibility of the user to ensure the
suitability of the product and information prior to use.
- 5 -
5. HEALTH AND SAFETY INFORMATION
- 6 -
GENERAL SAFETY INSTRUCTIONS
Warning: Please read all safety warnings and all details carefully. Failure to follow the warnings
may result in serious injury or major component damage.
Important: Draper Tools recommends that this product should not be modified or used for any
application other than that for which it was designed.
Save all warnings and instructions for future reference.
1) Personal safety
a) Stay alert, watch what you are doing and use common sense when using this product.
Do not use this product while you are tired or under the influence of drugs, alcohol or any
medication. A moment of inattention while using this product may result in serious personal
injury.
b) Use personal protective equipment as necessary.
c) Check and remove any part of the product before turning/testing the engine. A part left
attached to a rotating part of the engine may result in personal injury or major component
damage.
d) Carefully clean the tool components after every use.
f) Keep the tool components safe and tidy.
g) Do not use this product for any purpose other than for which it is designed.
Warning! Some of the packaging materials used may be harmful to children. Do not leave any of
these materials in the reach of children.
If any of the packaging is to be thrown away, make sure it is disposed of correctly; according to
local regulations.
6. CONTENTS
- 7 -
ITEM DESCRIPTION OEM STOCK No.
ACamshaft T10477 35548
Locking Plate
BCrankshaft T10340 35549
Locking Pin
CCamshaft Sprocket T10476 35550
Locking Tool
C
BA
7. APPLICATION
- 8 -
The 19106 has been developed as an engine timing kit for the vehicles listed below. Three-piece
kit consisting of the components required to lock the crankshaft, cam pulley and camshaft in the
‘timed’ position allowing the removal and replacement of the timing belt.
Used on the following Vehicles:
Seat Ibiza 2015 - 2017
Seat Leon 2014 - 2015
Seat Mii 2012 - 2017
Seat Toledo 2015 - 2016
Skoda Citigo 2011 - 2017
Skoda Fabia III 2014 - 2017
Skoda Octavia III 2014 - 2015
Skoda Rapid 2015 - 2016
Skoda Yeti 2014 - 2015
Volkswagen Beetle 2011 - 2017
Volkswagen Caddy 2010 - 2015
Volkswagen Golf 2003 - 2016
Volkswagen Polo 2002 - 2014
Volkswagen Up! 2011 - 2016
Engine Codes:
1.0cc
CHYB, CHYA, CPGA, DAFA
1.6cc
CWVA, CWVB
8. PREPARATION
- 9 -
The following is for guidance only. Please refer to OEM derived data such as the vehicle
manufacturer’s own data or Autodata. The use of this product is purely down to the user’s
discretion and Draper Tools Limited cannot be held responsible for any damage caused what so
ever.
- 10 -
Depending on manufacture and model, some engine components do change. Please check with
Autodata or the manufacturer’s data before use.
!
!
9. PROCEDURE AND APPLICATION GUIDE
Set the camshaft in position using component 3 as shown.
Support Tool SE11249
Fit tensioner tool to pulley and slacken bolt A.Turn tensioner in
an anti-clockwise direction to release tension on timing belt.
Remove timing belts from sprockets
Use component 1 to set the cam shaft positions relative
to each other
Please note images are for guidance only and subject to change.
Align the timing marks according to the manufacturer’s instructions and fit the crank-
shaft alignment tool 2 as shown.
Tabla de contenidos
Otros manuales de Herramientas de Draper
Draper
Draper 23310-BPF Manual de usuario
Draper
Draper 15498 Guía del usuario
Draper
Draper 98421 Manual de usuario
Draper
Draper ALG33 Manual de usuario
Draper
Draper BC1000 Manual de usuario
Draper
Draper 19141 Guía del usuario
Draper
Draper 18495 Guía del usuario
Draper
Draper STORMFORCE MT400 Manual de usuario
Draper
Draper 17819 Guía del usuario
Draper
Draper 28357 Manual de usuario
Draper
Draper GPAUG52-B Manual de usuario
Draper
Draper GPAUG52-B Manual de usuario
Draper
Draper STORMFORCE 65142 Manual de usuario
Draper
Draper P5 Manual de usuario
Draper
Draper PJSK Manual de usuario
Draper
Draper 50094 Manual de usuario
Draper
Draper 17609 Guía del usuario
Draper
Draper PT2000D Manual de usuario
Draper
Draper 5295 Manual de usuario
Draper
Draper DTK-FORD 52576 Manual de usuario
