Doro MemoryPlus 319ph Manual de usuario
MemoryPlus 319ph
1 Ringindikator
2 Återuppringning
3 Tonkontroll
4 Volymkontroll
5 R-knapp/programmering
6 Snabbval
Svenska
2
3
4
6
5
1
1 Ringer indicator
2 Redial function
3 Tone control
4 Volume control
5 Flash button/
programming
6 Speed dial memories
English
1 Témoin de sonnerie
2 Touche Bis
3 Curseur de réglage
de la tonalité
4 Curseur de réglage du
volume d’écoute combiné
5 ToucheRetde
programmation
6 Touchesdes
mémoiresdirectes
Français
7
English
Operation
Making a call
Regular dialling
1. Pick up the handset.
2. Enter the desired number.
Redial function
If a number was engaged or if you wish to redial the
most recently entered number, pick up the handset and
press the redial button .
Memories
This telephone has 4 speed dial memories.
Once a number has been saved in a memory location,
you only need to press one button to make the call. A
picture or symbol can be placed under the transparent
cover on the speed dial buttons so it is easy to see who
you are calling.
Dialling with speed dial
1. Pick up the handset and wait for the dialling tone.
2. Select required speed dial by pressing on the
appropriate button.
Volume control
Normal volume control for the handset.
Change frequency range/sound level and
quality (on the left side).
Hearing loop
The handset has a built-in hearing loop for those who wish
to use their hearing aids while using the telephone. Select
the T mode on your hearing aid to enable this feature.
8
English
Settings
Connection
1. Connect the telephone cord to a network wall socket
and to the Tsocket on the back of the telephone.
2. Connect the spiral cord to the handset and to the q
socket on the base of the telephone.
3. You will hear a click when the modular plug is
correctly in place.
4. Set correct Flash button time to 100 (see Technical
Information).
5. Lift the handset and listen for the dial tone.
Ring signal
Ring volume
Ring tone
Memories
Saving speed dial numbers
1. Make sure that theMake sure that the R/Pswitch on the base of the
telephone is set to P.
2. Lift the receiver and pressLift the receiver and press P((R) (ignore anything(ignore anything
you hear in the earpiece).
3. Enter the phone number (up to 16 digits) using theEnter the phone number (up to 16 digits) using the
keypad. PressPressPress P (R)..
4. Select memory position by pressing theSelect memory position by pressing the
corresponding button.
5. Replace the handset. The number has now been saved.Replace the handset. The number has now been saved.The number has now been saved.The number has now been saved.
Remember to return the R/Pswitch on the base of
the telephone to the Rposition when all the telephone
numbers have been saved.
Press if you want a pause in the telephone number.
9
English
Technical Information
There are several switches on the base of the
telephone.
These switches set technical parameters.
Flash button time (100/300/600).
100 is the standard setting for most countries.
300 for France/Portugal.
600 for New Zealand.
Troubleshooting
Check that the telephone cord is undamaged and
properly plugged in. Disconnect any additional
equipment, extension cords and other phones. If
the problem is resolved, the fault is with some other
equipment.
Test the equipment on a known working line (e.g. at a
neighbour’s house). If the equipment works there the
fault is probably with your telephone line. Please report
this to your network operator.
of purchase.
Guarantee
This product is guaranteed for a period of 12 months from
the date of purchase. If you experience any problems
please contact the place of purchase. Proof of purchase
is required for any service or support needed during the
guarantee period.
This guarantee shall not apply to a fault caused by an
accident or a similar incident or damage, liquid ingress,
negligence, abnormal usage or any other circumstances
on the purchaser’s part. Furthermore, this guarantee will
not apply to any fault caused by a thunderstorm or any
As a matter of precaution, we recommend disconnecting
the telephone during a thunderstorm.
10
English
UK
section, technical support is available by email on tech@
doro-uk.com or via a premium rate telephone number:
0905 895 0854, calls cost 50 pence per minute (prices
correct at the time of publication). Further contact details
www.doro-uk.com
Customer Services
Doro UK Ltd
1 High Street
Chalfont St Peter
Buckinghamshire
SL9 9QE
Declaration of conformity
Doro hereby declares that the product Doro
MemoryPlus 319ph conforms to the essential
requirements and other regulations contained in the
directives 1999/5/EC (R&TTE), 2002/95/EC (ROHS).
A copy of the manufacturer’s declaration is available at
www.doro.com/dofc
Swedish
English
French
Norwegian
Danish
Finnsih
German
Spanish
Italian
Dutch
Version 1.0
Otros manuales para MemoryPlus 319ph
2
Tabla de contenidos
Otros manuales de Teléfono de Doro
Doro
Doro 2424 Manual de usuario
Doro
Doro 1015CS Manual de usuario
Doro
Doro CONGRESS 200 Manual de usuario
Doro
Doro 931 Manual de usuario
Doro
Doro HearPlus 317ci Manual de usuario
Doro
Doro PAYPHONE ZIRCON Manual de usuario
Doro
Doro TEL 2 Manual de usuario
Doro
Doro AL503 Manual de usuario
Doro
Doro Magna 4000 Manual de usuario
Doro
Doro Tel 2i Manual de usuario
Doro
Doro PhoneEasy 331ph Manual de usuario
Doro
Doro COMFORT 4005 Manual de usuario
Doro
Doro congress 205 Manual de usuario
Doro
Doro PhoneEasy 331ph Manual de usuario
Doro
Doro CONGRESS 150 Manual de usuario
Doro
Doro X20 Manual de usuario
Doro
Doro 509C Manual de usuario
Doro
Doro Arc 7 Manual de usuario
Doro
Doro PhoneEasy Display 312C Manual de usuario
Doro
Doro 80 Manual de usuario
