Doro ALERTACALL 200E Manual de usuario

Alertacall 200e

1 Telephone in use indicator

2 Hanging hook for handset

3 Redial last number

4 Volume control for calls

5 Recall / programming button

6 Memory button

7 Customer Services button

8 I am okay button

English

Operation

Making a telephone call

1. Pick up the handset and wait for a dialtone.

2. Enter the desired number.

Redial last number

If a number was engaged or if you wish to redial the most recently

entered number, pick up the handset and press the redial button .

Control volume of calls

The handset earpiece volume may be adjusted during a call using .

Hearing loop for hearing aid users

The handset has a built-in hearing loop for those who wish to use their

hearing aids while using the telephone. Select the Tmode on your hearing

aid to enable this feature.

I am okay button

Press this as per instructions given by your

Safety Conrmation provider.

Customer Services button

Pick up the handset and press this button to call your

Safety Conrmation provider.

Memory button

Allows you to store one or more numbers in your telephone,

so it's easier to call them later.

See 'Storing numbers in the telephone' section.

English

Settings

Setting up the telephone

1. Connect the telephone cord to a network wall socket and to the T

socket on the back of the telephone.

2. Connect the curly cord to the handset and to the socket marked q

on the side of the telephone.

3. You will hear a click when the modular plug is correctly in place.

4. Lift the handset and listen for the dial tone.

Ringer volume switch

The ringer volume can be adjusted using on the right hand side

of the telephone.

Checking that the 'I am okay' button works

When you rst plug in your telephone we recommend you press the

'I am okay' button.

Wait a minute and then telephone your Safety Conrmation provider, using

the Customer Services button to conrm they received the signal.

Storing numbers in the telephone

The Memory Button can have the number of a friend, relative or contact

assigned to it. This means, that once programmed, with just a single press

of the Memory Button you can ring that person.

You can also store up to a further 10 numbers on the telephone, these can

be accessed by pressing the Memory Button followed by a number 1 to 9

on the keypad.

Assigning a telephone number to the Memory Button

This allows you to call a telephone number simply by lifting the handset

and pressing the Memory Button. We recommend you assign your most

important telephone number to this button.

English

1. Make sure the R/Pswitch on the base of the telephone is set to P.

2. Lift the handset and press Pon the front of the telephone.

3. Enter the full telephone number using the keypad.

4. Press and hold the Memory Button for 2 seconds. A red light at the top

of the telephone will ash to conrm the number has been stored.

5. Replace the handset. The number has now been saved.

Note: Please remember to return the R/Pswitch on the base of the telephone to

the R position when you have nished saving your telephone number.

To dial the telephone number simple pick up the handset, wait for a dial-

tone and press the Memory Button. Your number will be dialled.

Storing up to 10 other telephone numbers using the 0 to 9 keys

This will allow you to assign up to 10 telephone numbers to the black

numeric keys 0 to 9.

1. Make sure the R/Pswitch on the base of the telephone is set to P.

2. Lift the handset and press Pon the front of the telephone.

3. Enter the phone number using the keypad.

4. Press the Memory Button followed by a number on the keypad 0 to 9.

A red light at the top of the telephone will ash to conrm the number

has been stored.

5. Replace the handset. The number has now been saved.

6. You can repeat this process choosing a different number 0 to 9 for

each telephone number you wish to store.

Note: Please remember to return the R/Pswitch on the base of the telephone to

the R position when you have nished saving your telephone number.

To dial the telephone number simply pick up the handset, wait for a dial-tone

and press the Memory Button followed by the relevant number 0 to 9.

Please note you must press the relevant number 0-9 within 3 seconds of

pressing the Memory Button.

English

Technical Information

There are several switches on the base of the telephone. One of the

switches is used for programming the telephone and the other is used to

make the phone work in other countries.

Recall button timing (100/300)

100 is the standard setting for most countries.

300 for France/Portugal.

R/P

R Normal mode, the R-button works as normal.

PProgramming mode, the R-button is used for programming the

Memory Button.

Troubleshooting

Check the telephone cord is undamaged and properly plugged in.

Disconnect any additional equipment, extension cords and other phones.

If the problem is resolved, the fault is with some other equipment.

Test the equipment on a known working line (e.g. at a neighbour’s house).

If the equipment works there the fault is probably with your telephone

line. Please report this to your network operator.

If you are still experiencing difculties, contact the place of purchase.

Guarantee

This product is guaranteed for a period of 12 months from the date of

purchase unless otherwise stated by written agreement. If you experience

any problems please contact the place of purchase. Proof of purchase is

required for any service or support needed during the guarantee period.

This guarantee shall not apply to a fault caused by an accident or a similar

incident or damage, liquid ingress, negligence, abnormal usage or any

other circumstances on the purchaser’s part. Furthermore, this guarantee

will not apply to any fault caused by a thunderstorm or any other voltage

uctuations.

As a matter of precaution, we recommend disconnecting the telephone

during a thunderstorm.

English

Help and support

If you cannot resolve any issue using the troubleshooting section,

technical support is available by email on

alertacall200e@safetyconfirmation.com

You may also call your Safety Conrmation provider on the number they

have given you.

Declaration of conformity

Doro hereby declares that the product Alertacall 200e conforms to the

essential requirements and other regulations contained in the directives

1999/5/EC (R&TTE), 2002/95/EC (ROHS).

A copy of the manufacturer’s declaration is available at

www.doro.com/dofc

English

Version 1.0

Tabla de contenidos

Otros manuales de Teléfono de Doro

Manuales populares de Teléfono de otras marcas

GE 2-9480 Manual de usuario

Geemarc

Geemarc PHOTOPHONE 155 Manual de usuario

D-Link

D-Link DWR-720/PW Manual de usuario

Interquartz

Interquartz Gemini IQ333 Manual de usuario

SSS Siedle

SSS Siedle HT 840-0 Manual de usuario

Motorola

Motorola TITANIUM Manual de usuario

Panasonic

Panasonic ICX Manual de usuario

LG H870DS Manual de usuario

Samsung

Samsung GT-I9500 Manual de usuario

AT&T

AT&T Trimline 205 Manual de usuario

Selta

Selta zenyth 600 Manual de usuario

UNIQCELL

UNIQCELL A1 Manual de usuario

Panasonic

Panasonic KX Series Manual de usuario

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Manual de usuario

BT Decor 425 Manual de usuario

NEC

NEC SV8500 Manual de usuario

Teledex

Teledex PEARL Manual de usuario

Ericsson

Ericsson Dialog 3213 Manual de usuario