dji OSMO ACTION Manual de usuario
2019.05
v1.0
OSMO ACTION
User Manual
Not nal
2
© 2019 DJI OSMO All Rights Reserved.
Searching for Keywords
Search for keywords such as “battery” and “install” to nd a topic. If you are using Adobe Acrobat
Reader to read this document, press Ctrl+F on Windows or Command+F on Mac to begin a search.
Navigating to a Topic
View a complete list of topics in the table of contents. Click on a topic to navigate to that
section.
Printing this Document
This document supports high resolution printing.
Using this Manual
Legend
Important Hints and Tips
Read Before First Use
Read the following documents before using OSMOTM Action:
1. User Manual
2. Disclaimer and Safety Guidelines
It is recommended to watch all tutorial videos on the ocial DJITM website (www.dji.com/osmo-action)
or in the DJI Mimo app and read the user manual and the disclaimer and safety guidelines before using
for the rst time.
Downloading the DJI Mimo App
Scan the QR code or search for "DJI Mimo" on the App Store or Google Play.
The Android version of DJI Mimo is compatible with Android v6.0 and later. The iOS version of
DJI Mimo is compatible with iOS v10.0 and later.
© 2019 DJI OSMO All Rights Reserved.
3
Contents
Using this Manual 2
Legend 2
Read Before First Use 2
Downloading the DJI Mimo App 2
Introduction 4
Overview 4
Attaching the Battery 5
Activating Osmo Action 5
Charging Osmo Action 6
Operation 6
Button Features 6
Operating the Touchscreen 8
Storing Photos and Videos 10
Status LED Descriptions 10
DJI Mimo App 11
Updating Firmware 13
Maintenance 14
Underwater Usage Notes 14
Clean Notes 14
Specications 15
After-Sales Information 15
OSMO ACTION User Manual
Not nal
4
© 2019 DJI OSMO All Rights Reserved.
Introduction
Osmo Action is a dual screen action camera equipped with DJI’s latest RockSteady EIS technology and
can shoot sharp 12MP photos, capture stable video at up to 4K/60fps, and is also able to record HDR
video. The back screen is a hyper-responsive touchscreen that enables users to change settings while
the front screen helps to take the perfect sele. Complete with voice control, custom modes, a Quick
Switch button and SnapShot feature, users can power on and take photos and record videos within a
couple of seconds. Osmo Action is also waterproof, allowing it to be used at depths of up to 11 m. It
is also compatible with several accessories so users can expand their creative possibilities using Osmo
Action.
Overview
1. Shutter/Record Button
2. Status LED I
3. Lens Filter Cap
4. Front Screen
5. Lens
6. Ventilation Area
7. Status LED II
8. microSD Card Slot
9. USB-C Port
10. Cover Release Button
11. USB-C Cover
12. Quick Switch Button
13. Power Button
14. Microphone I
15. Touchscreen
16. Speaker
17. Air Pressure Balance Hole
18. Microphone II
19. Battery Release Button I
20. Battery Release Button II
21. Battery
1
4
7
5
6
3
2
13
14
8
10
11
18
19
15
16
17
20
21
9
12
The Lens filter cap and ventilation area may become hot during use. To avoid scalding, DO
NOT touch.
For the best waterproof performance, do not detach the lens filter cap unless necessary.
OSMO ACTION User Manual
© 2019 DJI OSMO All Rights Reserved.
5
Attaching the Battery
The camera frame is mounted by default and must be removed before attaching the battery.
Activating Osmo Action
Insert the battery as shown. Press both sides of the battery to make sure it is properly inserted. Note
that if the battery is properly inserted, the orange marks on either side of the battery are not visible.
When using Osmo Action, activation is required through DJI Mimo. Follow the steps below to
activate.
1. Press and hold the power button to power on.
2. Enable Bluetooth on your mobile device.
3. Launch DJI Mimo and tap in the top-left corner, and follow the instructions to activate Osmo
Action.
#OSMO POCKET
Learn how to take easy My
Story shots
01:42
#Tutorial
Learn how to take easy
Timelapse shots with Osmo
Pocket
00:16
#Pano Mode
Quickly master 3X3 panorama
shots
04:37
#OSMO POCKET
Learn to use Story Mode and
create fun videos
01:42
DJI MIMO
OSMO POCKET
OSMO ACTION
OSMO ACTION User Manual
Not nal
6
© 2019 DJI OSMO All Rights Reserved.
Charging Osmo Action
Press the cover release button on the USB-C cover and slide the cover down.
To charge Osmo Action, connect a USB adapter (not included) to the USB-C port using the power
cable (included). The status LEDs are solid red while charging. The battery is fully charged when the
status LEDs turn o.
Charging time: approx. 1 hour 30 minutes (using a USB adapter of 5 V/2 A)*
If charging Osmo Action with the camera frame mounted, it is recommended to detach the USB-C
cover for convenience. To remove, pull the USB-C cover towards the Quick Switch button until it
detaches.
*Charging time is for reference only.
Operation
Button Features
Power Button
OSMO ACTION User Manual
© 2019 DJI OSMO All Rights Reserved.
7
Power Button
When Osmo Action is powered o, press the power button to power on.
When Osmo Action is recording or connected to DJI Mimo, press the power button to turn off the
touchscreen. Press again to turn on the touchscreen. Note that if Osmo Action is recording when the
touchscreen is turned o, it will continue to record.
When Osmo Action is idle while powered on and not connected with DJI Mimo, press the power button
to enter sleep mode. Press again to exit sleep mode.
When Osmo Action is powered on, press and hold the power button to power o.
Shutter/Record Button
Press to take photos or to start or stop recording.
SnapShot: available when the device is powered o or in sleep mode. SnapShot mode can be set in
SnapShot settings. Refer to the Operating the Touchscreen section for more information.
Quick Switch Button
In camera view, press to select the shooting mode and the Quick Switch menu will appear. Tap an icon
to select a shooting mode.
In setting pages or playback, press to return to camera view.
Press and hold to switch between the front screen and touchscreen camera view.*
* If the screen is switched while recording a video, the video will stop recording and a new video
recording will begin.
Shutter/Record Button
Quick Switch Button
OSMO ACTION User Manual
Not nal
8
© 2019 DJI OSMO All Rights Reserved.
Operating the Touchscreen
The following instructions are only applicable to the touchscreen. They will not work on the front screen.
Swipe Down
Create/Manage Custom Mode
Tap and tap the icon again to save the current conguration as a custom mode. Up to ve custom
modes can be saved. Swipe left and right to choose a saved custom mode. Tap Delete in the bottom-
right corner to delete a mode.
Brightness
Tap and move the slider to adjust the brightness.
Screen Lock
Tap to lock the screen. To unlock the screen, tap on the screen and move the slider.
Settings
Quick Actions
1. Voice Control: enable voice control to use Osmo Action with voice commands. Voice commands
include Start Recording, Stop Recording, Take Photo, Screen Switch, and Shut Down. English and
Chinese Mandarin are supported.
2. SnapShot: when Osmo Action is powered o or in sleep mode, use SnapShot to quickly power on
and begin shooting. Supported shooting modes include Video, Photo, Slow Motion, HDR Video,
Burst, Timed, AEB, Custom mode, and Timelapse.
3. Quick Switch: use Quick Switch to quickly swap between modes, and custom settings. Shooting
modes supported include Video, Photo, Slow Motion, HDR Video, Burst, Timed, AEB, Custom
mode, and Timelapse.
General
1. Wireless Connection: tap to check the camera name and password in Wireless Info, set the Wi-Fi
Frequency, and reset the Wi-FI password and all connections in Reset Connection.
2. Wind Noise Reduction: tap to enable or disable wind noise reduction.
3. Sounds: choose from high, medium, low, and o.
4. Grid: tap to enable or disable grid.
5. Face-Oriented Exposure: when a face is detected, exposure on the face is prioritized.
6. Anti-Flicker: prevent the ickering of lights by selecting the frequency according to local regulations.
7. Screen Auto Sleep: tap to set the time before Osmo Action enters sleep mode.
8. Auto Power O: tap to set the time before Osmo Action powers o automatically.
OSMO ACTION User Manual
© 2019 DJI OSMO All Rights Reserved.
9
9. LED: turn the two status LEDs on Osmo Action on or o.
10. Language: set the language to English, Simplied Chinese, Traditional Chinese, Japanese, Korean,
German, or French.
11. Date/Time: tap to set date and time.
12. Format SD Card: tap to format microSD card.
13. Factory Reset: tap to reset default settings.
14. About: tap to view name, serial number, rmware version, and regulatory info.
Screen Flip
Tap
AUTO
to switch the screen orientation to up, down, or automatic.
Spot Metering
Tap ON to enable or disable spot metering. Tap and hold the screen to use spot metering. Tap again to
enable AE lock, and tap and hold the screen to disable AE lock.
Voice Control
Tap ON to enable or disable voice control.
Front Screen Settings
Tap to switch between full screen and letterbox display.
Swipe Up
Swipe up and then swipe left or right to set parameters such as photo ratio, countdown time, and
resolution. In Video mode, tap RockSteady* to enable or disable electronic image stabilization. Note that
the parameters depend on the shooting mode and that RockSteady is unavailable in certain resolutions.
* RockSteady requires a rmware update.
Swipe Left
Exposure Parameter Settings
In Auto mode, the EV and Max. ISO value can be set. The ISO value is adjusted automatically within the
setting range during use.
In Manual mode, the shutter speed and ISO value can be set. Note that the Max. ISO value can only be
set when the ISO value is set to auto.
/ Image/Video Settings
Set white balance, select the color mode between Normal and D-Cinelike*, turn Dewarp on or o, and
choose format.
* D-Cinelike provides greater data retention of color and brightness, which allows for more exibility in
post-production.
OSMO ACTION User Manual
Not nal
10
© 2019 DJI OSMO All Rights Reserved.
Swipe Right
Swipe right and then swipe left or right to scroll through photos and videos. Tap to playback videos. Tap
the corresponding icon to add favorites or delete photos or videos. Tap at the top left top to view
photo and videos by category.
When viewing a photo, move the slider on the left side of the screen up or down to adjust the
brightness. Tap the icon 16:9 in the bottom-middle to view timed and burst photos.
When viewing a video, move the slider on the left side of the screen up or down to adjust the brightness
and move the slider on the right side to adjust the volume. Drag the progress bar to watch the video.
Tap
Tap the icon on the bottom-left corner on camera view to select shooting modes.
Double Tap with Two Fingers
Double tap the touchscreen on camera view with two fingers to switch between the front and
touchscreen.
Storing Photos and Videos
The footage shot on Osmo Action can be stored on a microSD card (not included). A UHS-I Speed
Grade 3 rating microSD card is required due to the fast read and write speeds necessary for high-
resolution video data. Refer to the recommended microSD card list at www.dji.com/osmo-action for
more information.
Insert the microSD card into the microSD card slot as shown.
Status LED Descriptions
There are two status LEDs on Osmo Action, which indicate the same information. The status LEDs can
be turned on and o.
Otros manuales para OSMO ACTION
6
Tabla de contenidos
Otros manuales de Cámara de acción de dji
dji
dji OSMO+ Manual de usuario
dji
dji OSMO ACTION 4 Manual de usuario
dji
dji Osmo Pocket Manual de usuario
dji
dji OSMO ACTION Manual de usuario
dji
dji Zenmuse XT Manual de usuario
dji
dji Zenmuse Zenmuse Manual de usuario
dji
dji OSMO ACTION Manual de usuario
dji
dji OSMO ACTION Manual de instrucciones
dji
dji OSMO POCKET 3 Manual de usuario
dji
dji OSMO ACTION Guía de instalación
