dji OSMO ACTION 4 Manual de usuario
User Manual
2023.08v1.0
2 ©2023 DJI All Rights Reserved.
Searching for Keywords
Search for keywords such as Battery or Install to find a topic. If you are using Adobe
Acrobat Reader to read this document, press Ctrl+F on Windows or Command+F on Mac
to begin a search.
Navigating to a Topic
View a complete list of topics in the table of contents. Click on a topic to navigate to that
section.
Printing this Document
This document supports high resolution printing.
This document is copyrighted by DJI with all rights reserved. Unless otherwise authorized by DJI,
you are not eligible to use or allow others to use the document or any part of the document by
reproducing, transferring, or selling the document. Users should only refer to this document
and the content thereof as instructions to operate DJI products. The document should not be
used for other purposes.
DJI Osmo Action 4 User Manual
©2023 DJI All Rights Reserved. 3
Using this Manual
Legends
Important Hints and Tips
Read Before Use
Read the following documents before using DJI™ OSMO™ Action 4.
1. Osmo Action 4 Safety Guidelines
2. Osmo Action 4 Quick Start Guide
3. Osmo Action 4 User Manual
It is recommended to watch all tutorial videos and read the safety guidelines before using for
the rst time. Make sure to review the Quick Start Guide before using for the rst time and refer
to this User Manual for more information.
Download DJI Mimo App and Watch the Tutorial Video
Scan the QR code to download the DJI Mimo App and watch the tutorial videos.
Android 8.0 or aboveiOS 12.0 or above
https://s.dji.com/guide60
DJI Store App
DJI Mimo App
4 ©2023 DJI All Rights Reserved.
Contents
Using this Manual 3
Legends 3
Read Before Use 3
Download DJI Mimo App and Watch the Tutorial Video 3
Contents 4
Product Profile 5
Overview 5
Accessories 6
Using for the First Time 9
Attaching the Battery 9
Inserting the microSD Card 9
Activating Osmo Action 4 10
Charging Osmo Action 4 10
Operation 11
Button Features 11
Operating the Touchscreen 11
Status LED Descriptions 20
Storing Photos and Videos 20
Transferring Files 21
Webcam Mode 22
Microphone Connection 22
DJI Mimo App 23
Download the DJI Mimo App 23
Connecting to the DJI Mimo App 23
DJI Mimo App Home Screen 24
Camera View 25
Maintenance 27
Firmware Update 27
Underwater Usage Notes 27
Cleaning Notes 28
Battery Usage Notes 28
Using Other Accessories (Not Included) 29
Specifications 32
DJI Osmo Action 4 User Manual
©2023 DJI All Rights Reserved. 5
Product Prole
Osmo Action 4 is capable of capturing smooth video at up to 4K/120fps and offers a 155°
super-wide FOV. With DJI’s latest EIS (Electronic Image Stabilization) technology, Osmo Action
4 can record super smooth footage for various sports scenes. With a 1/1.3-inch image sensor,
the camera ensures low-noise footage in sports scenarios and low-light scenes with a high
dynamic range or high contrast. In addition, D-Log M color mode provides a more comfortable
color perception and a larger dynamic range, which is convenient for post-production color
correction.
Osmo Action 4 is equipped with dual touchscreens. The front touchscreen helps capture the
perfect sele, while the rear touchscreen displays the liveview of the camera. Both touchscreens
enable users to change the settings with fingertip movements. The buttons on the camera
enable users to control recording or switch the shooting mode. Osmo Action 4 is waterproof at
depths of up to 18 m. With dierent Osmo accessories, users can enjoy the full range of Osmo
Action 4 features.
Overview
1. Shutter/Record Button
2. Front Touchscreen
3. Lens
4. Status LED I
5. Microphone I
6. Color Temperature Photo Sensor
7. Microphone II
8. USB-C Port
9. USB-C Port Cover
10. USB-C Port Cover Release Button
11. Lens Protective Cover
12. Quick Switch Button
13. Speaker
14. Status LED II
15. Rear Touchscreen
16. Battery Compartment Cover
17. microSD Card Slot
18. Battery Compartment Cover Release Button
19. Windproof Microphone
20. Quick-Release Slot I
21. Quick-Release Slot II
1
2
7
13
3
4
8
9
10
11
12
5
6
19
20 21
14
15
16
17
18
DJI Osmo Action 4 User Manual
6 ©2023 DJI All Rights Reserved.
Accessories
Osmo Action 4 is compatible with various accessories to exibly change the position to shoot
various sports scenes.
Osmo Action Curved Adhesive Base Kit
The Osmo Action Curved Adhesive Base Kit includes the following accessories.
Accessory Description
Osmo Action Quick-Release Adapter Mount: with a magnetic
design, the quick-release adapter mount can be easily attached
to the camera and connected to other accessories.
Osmo Locking Screw: secures the Osmo Action Quick-Release
Adapter Mount to the Osmo Action Curved Adhesive Base.
Osmo Action Curved Adhesive Base: the base forms a strong,
durable, and long-lasting bond on clean and curved surfaces,
ensuring secure mounting.
Press down on the camera until the clips of the quick-release adapter mount are rmly inserted
into the quick-release slots on the camera, and then tighten the locking screws. Wipe the
surface of the object before attaching the adhesive base. Attach and press the adhesive base
down rmly, and hold for at least 10 seconds. It is recommended to wait 30 minutes before
attaching the camera.
90°90°
DJI Osmo Action 4 User Manual
©2023 DJI All Rights Reserved. 7
• Press down on the camera until the clips of the quick-release adapter mount are
rmly inserted into the quick-release slots on the camera, and then tighten the locking
screws. Press both clips of the quick-release adapter mount when removing the
camera.
• Osmo Action Curved Adhesive Base can only be applied to clean curved surfaces once.
DO NOT attach the curved adhesive base to surfaces that are at, rough, powdered,
peeling, covered in dust or sand, or have oil, wax, or water stains. Otherwise, the
adapter mount may not be attached rmly.
• The recommended application temperature for the base is -10° to 40° C (14° to 104° F).
DO NOT attach the adhesive base to a surface with a higher or lower temperature.
Osmo Action Horizontal-Vertical Protective Frame
With the Osmo Action Horizontal-Vertical Protective Frame, users can ip the camera from the
horizontal to the vertical position for dierent shooting angles. As shown in the gure below,
open the buckle of the horizontal-vertical protective frame, align and place the camera into the
frame, and then close the buckle. The left side of the frame is equipped with two quick-release
slots, which can be used with the Osmo Action Quick-Release Adapter Mount to fasten other
accessories such as the Osmo Action Curved Adhesive Base Kit and the Osmo 1.5m Extension
Rod.
1
2
3
90°90°
DJI Osmo Action 4 User Manual
8 ©2023 DJI All Rights Reserved.
• DO NOT use the battery case to charge non-DJI OSMO batteries. DJI OSMO shall not be
responsible for any fault or damage caused by the use of any non-DJI OSMO battery.
• Place the battery case on a at and stable surface when in use. Make sure the device is
properly insulated to prevent re hazards.
• DO NOT attempt to touch the metal terminals on the battery ports.
• Clean the metal terminals with a clean, dry cloth if there is any noticeable buildup.
• The battery case is not waterproof. DO NOT place it in water or spill any liquid on the
case.
Osmo Action Extreme Battery
The Osmo Action Extreme Battery boosts Osmo Action 4 performance across a wide
temperature range from -20° to 45° C (4° F to 113° F). With a 1770 mAh capacity, the battery
can continuously work for up to 160 minutes.* Refer to Battery Usage Notes for more detailed
information on battery usage.
* Tested at room temperature (25°C/77°F) and 1080p/24fps (16:9), with RockSteady on, Wi-Fi o, and screen
o. This data is for reference only.
Osmo Action Multifunctional Battery Case
The Osmo Action Multifunctional Battery Case (hereinafter referred to as the battery case) is
designed for storing two microSD cards and three Osmo Action Extreme Batteries safely. Users
can check the battery levels by pressing the button once or opening the battery case. The
status LEDs will display the battery level. When a charger is connected to the battery case with
batteries inserted, the battery case will charge the batteries. When the batteries are inserted
into the battery case, with external devices connected to the USB-C port, the batteries can be
used as a power bank to charge the connected external devices.
The batteries with the highest power level will be charged first, followed by the remaining
batteries to be charged in sequence. The batteries with the lowest power level will be
discharged rst, followed by the remaining batteries to be discharged in sequence.
When using the battery case to charge the Osmo Action Extreme Battery, it is recommended
to use the DJI 30 W USB-C Charger (not included as standard) or a USB-C charger that supports
Power Delivery or PPS (Programmable Power Supply). Three batteries can be fully charged in
about two hours with the DJI 30 W USB-C Charger.
DJI Osmo Action 4 User Manual
©2023 DJI All Rights Reserved. 9
Using for the First Time
Attaching the Battery
Press the release button on the battery compartment cover and slide upward, then insert
the battery into the battery compartment, as shown below. Make sure the battery is properly
inserted, then close the battery compartment cover. Note: if the battery cover is properly
mounted, the red marks on the bottom will not be visible.
Inserting the microSD Card
The footage shot on Osmo Action 4 is stored on a microSD card. A UHS-I Speed Grade 3
rating microSD card is required due to the fast reading and writing speeds necessary for high-
resolution video data. Refer to the recommended microSD card list in Specications for more
information. Insert the microSD card into the microSD card slot as shown.
• Gently push the microSD card into the camera to partially eject the microSD card.
1
2
1
2
DJI Osmo Action 4 User Manual
10 ©2023 DJI All Rights Reserved.
Activating Osmo Action 4
The DJI Mimo app is required for activation when using Osmo Action 4 for the rst time. Follow
the steps below to activate.
1. Press and hold the Quick Switch Button to power on.
2. Enable Wi-Fi and Bluetooth on the mobile device.
3. Launch DJI Mimo, tap , and follow the instructions to activate Osmo Action 4.
Refer to the relevant sections in DJI Mimo App for more information on how to operate the app.
00 !39
Life Advice Looking Through... Do A Sporting Stag
01!23
OSMO MOBILE 4 MORE
OSMO ACTION MORE
TEMPLATE
SUPPORT
COMMUNITY
Home EditAlbum Me
Device ACADEMY
DJI MIMO
Device
发现
学院
9:41
Charging Osmo Action 4
Press the release button on the USB-C port cover and slide the cover down.
Connect a USB-C charger (not included) to the USB-C port using the Type-C to Type-C PD cable
(included). It is recommended to use the DJI 30 W USB-C Charger or a USB-C charger that
supports Power Delivery or PPS (Programmable Power Supply). When the status LEDs turn o,
the battery is fully charged. It takes about 18 minutes to charge the battery to 80%. The battery
can be fully charged in about 49 minutes.*
* Charging time was tested using a DJI 30 W USB-C Charger in a 25° C (77° F) environment. For reference only.
Otros manuales para OSMO ACTION 4
1
Tabla de contenidos
Otros manuales de Cámara de acción de dji
dji
dji ACTION 2 Manual de usuario
dji
dji OSMO ACTION Manual de instrucciones
dji
dji Zenmuse X5 Manual de usuario
dji
dji OSMO POCKET 3 Manual de usuario
dji
dji ZENMUSE Z3 Manual de usuario
dji
dji OSMO ACTION 3 Manual de usuario
dji
dji OSMO ACTION Guía de instalación
dji
dji Zenmuse XT Manual de usuario
dji
dji Osmo Pocket Manual de usuario
dji
dji POCKET 2 CREATOR COMBO Manual de usuario
