Directed 403.CHRYSLER3 Manual de usuario
DB3 403.CHRYSLER3
v4.32
2012 Dodge/Ram Journey (Smart Key)
THCHD3 Compatible
(Sold Separately)
Introduction 3
Vehicle function compatibilities 4
Pre-installation and application warnings 5
Installation 6
Wiring diagram with T-Harness (THCHD3 Rev. 1 & 2) 6
Wiring diagram 7
Locating components in the vehicle 8
Vehicle connections 9
SmartStart/XL202 installation notes 11
Connecting the module 11
LED diagnostics and troubleshooting 13
Soft reset 15
Hard reset 15
Module programming 16
Feature programming 17
Feature and option list 18
Limited one year consumer warranty 19
Quick Reference Guide (customer copy) 20
Contents
3403.CHRYSLER3 4.32 2012 Dodge/Ram Journey (Smart Key)
©2022 VOXX•DEI LLC. All rights reserved.
Introduction
DB3 is an all-in-one door lock and override module. This guide supports the installation of a DB3 in Range
Extender Ready (RXT) mode with an RF System or a SmartStart (both sold separately).
Warning!
This module can only be flashed and configured using DirectLink at www.directechs.com or using the Directechs
Mobile application for smartphones. Refer to “Connecting the module” for more information.
4403.CHRYSLER3 4.32 2012 Dodge/Ram Journey (Smart Key)
©2022 VOXX•DEI LLC. All rights reserved.
Vehicle function compatibilities
This section lists all the functions compatible with this vehicle for the installation illustrated in this guide.
Note: The telematics features listed below (with an asterisk) ONLY apply when using SmartStart.
Parking Lights Control
Heated Seats Activation
Rear Window Defogger Activation
Arm Factory Security
Disarm Factory Security
Door Lock Control
Door Unlock
Driver Priority Unlock
Control of aftermarket alarm with OEM remote
Fuel level/EV battery level
Key2GO
Immobilizer Bypass-Data No Key Req'd
3x LOCK START (Start control using OEM Remote)
3x LOCK STOP (Stop control using OEM Remote)
OEM Remote Start Activation using XL-202 or RF kit
Remote Start Ready
Remote Start Takeover
SmartStart
Tach / RPM Output
Entry Monitoring ALL Door Pins
Entry Monitoring Driver Door Pin
Entry Monitoring Trunk/Hatch Pin
Brake Status (foot brake)
E-Brake Status
Ignition Status
5403.CHRYSLER3 4.32 2012 Dodge/Ram Journey (Smart Key)
©2022 VOXX•DEI LLC. All rights reserved.
Pre-installation and application warnings
START HERE This section highlights important information for this specific firmware and will assist in pricing accordingly, as
well as bringing awareness to any operational or vehicle limitations.
Compatibilities and Requirements
T-Harness
compatible THCHD3 Rev. 1 & 2
AUX
Keys required for
programming 1Keys required
for operation 0
Vehicle Takeover Refer to the Quick Reference Guide section for more details.
Firmware notes
OEM Touch Screen: The Comfort Convenience Controls, Heated Seats Activation feature and Rear Window Defogger Activation
feature, will only function if the vehicle is equipped with OEM touchscreen radio package.
Remote Start features: The following remote start features can be configured via the information display:
• All Locks (must also set during module flashing)
• Driver Priority Locks (must also set during module flashing)
Range Extender Ready (RXT) installations are only compatible with vehicles equipped with factory-installed remote starter.
Range Extender Ready (RXT) is used to dramatically increase the factory remote start activation range compared to the factory
transmitter. Refer to the Quick reference guide for more information.
The optional Plug & Play THCHD3 Rev. 1 & 2 T-Harnesses are sold separately
SmartStart Compatible: SmartStart is equipped with D2D, which means it can be connected to an interface module and used in
Range Extender Ready (RXT) mode without the use of a remote starter. See "Module programming" for more information.
Unless specified otherwise, all connectors are displayed from the wire side, with the exception of the OBDII diagnostic connector.
Refer to the "Vehicle connections" following the installation diagram.
Footnotes
[1] Hood pin: The installation of an aftermarket hood pin is only required on vehicles that are not equipped with a factory hood pin or if
not supported in data.
6403.CHRYSLER3 4.32 2012 Dodge/Ram Journey (Smart Key)
©2022 VOXX•DEI LLC. All rights reserved.
Refer to "Pre-installation and application warnings" for important information, such as the description of each special note referenced in the diagram ( ).
Do not cut the loops
For Rev. 2 ONLY
Wiring diagram with T-Harness (THCHD3 Rev.1 & 2)
D2D
only
The Remote
Start Safety
Override Switch
is inactive
(used for RSR
only)
THCHD3 Rev. 1 & 2 (optional T-Harness)
OR
OBDII
Diagnostic Connector
6-pin
Connectors
T-01 T-02
Not Used
Use the style of OBDll
connector that fits the best.
Do Not Connect
1412
10 42
You can connect to either a
XL202 RFTD OR a SmartStart
module.
Refer to the SmartStart/XL202
Installation Notes for more
information.
7403.CHRYSLER3 4.32 2012 Dodge/Ram Journey (Smart Key)
©2022 VOXX•DEI LLC. All rights reserved.
Refer to "Pre-installation and application warnings" for important information, such as the description of each special note referenced in the diagram ( ).
1412
10 42
1 8
169
HS CAN2 High: Orange/Green: 5
HS CAN2 Low: Orange/Brown: 6
(+) 12V Input: Red: 13
(-) Ground: Black: 14
HS CAN Low: Tan: 4
HS CAN High: Tan/Black: 3
CAN C Low:
Yellow, pin 14
(-) Ground: Black, pin 4
(+) 12V:
Red, pin 16
CAN C High:
Gray/White, pin 6
OBDII
Diagnostic Connector
CAN IHS Low:
White, pin 11
CAN IHS High:
Gray, pin 3
Wiring diagram
6: White/Black:
(-) Hood Input
Remote Start Safety
Override Switch
You can connect to either a
XL202 RFTD OR a SmartStart
module.
Refer to the SmartStart/XL202
Installation Notes for more
information.
Hood Pin
9403.CHRYSLER3 4.32 2012 Dodge/Ram Journey (Smart Key)
©2022 VOXX•DEI LLC. All rights reserved.
Vehicle connections
The connection information listed below is specific to the 2012 Dodge/Ram Journey (Smart Key). Refer to “Pre-installation and application warnings” for a list of important notes.
Data 14-pin blue connector (H1)
Module Connects To
Conn./Pin Color Description Wire Location (+/-) Wire Color
H1/1 Light Green No Connection No Connection
H1/2 Violet/Yellow No Connection No Connection
H1/3 Tan/Black (DATA) HS CAN High 1 OBD-Data Link Connector, black 16 pin plug, pin 6 Data Gray/White (CAN C)
H1/4 Tan (DATA) HS CAN Low 1 OBD-Data Link Connector, black 16 pin plug, pin 14 Data Yellow (CAN C)
H1/5 Orange/Green (DATA) HS CAN High 2 OBD-Data Link Connector, black 16 pin plug, pin 3 Data Gray (CAN IHS)
H1/6 Orange/Brown (DATA) HS CAN Low 2 OBD-Data Link Connector, black 16 pin plug, pin 11 Data White (CAN IHS)
H1/7 Brown Relay N.O. No Connection No Connection
H1/8 Yellow Relay COM No Connection No Connection
H1/9 Orange/Yellow Relay N.C. No Connection No Connection
H1/10 Orange/Red Relay N.C. No Connection No Connection
H1/11 Yellow/Red Relay COM No Connection No Connection
H1/12 Brown/Red Relay N.O. No Connection No Connection
H1/13 Red (+) 12 Volt Input OBD-Data Link Connector, black 16 pin plug, pin 16 + Red (10A)
H1/14 Black (-) Ground OBD-Data Link Connector, black 16 pin plug, pin 4 - Black
Output 12-pin red connector (H2)
Module Connects To
Conn./Pin Color Description Wire Location (+/-) Wire Color
H2/1 Black/White No Connection No Connection
H2/2 Green/Black No Connection No Connection
H2/3 Green/White No Connection No Connection
H2/4 Red/Black No Connection No Connection
H2/5 Violet/White No Connection No Connection
H2/6 Gray No Connection No Connection
H2/7 Gray/Black No Connection No Connection
H2/8 Violet/Green No Connection No Connection
H2/9 Violet/Brown No Connection No Connection
H2/10 Yellow/Black No Connection No Connection
H2/11 Orange/Black No Connection No Connection
H2/12 Blue/Red No Connection No Connection
Input 10-pin black connector (H3)
Module Connects To
Conn./Pin Color Description Wire Location (+/-) Wire Color
H3/1 Green No Connection No Connection
10 403.CHRYSLER3 4.32 2012 Dodge/Ram Journey (Smart Key)
©2022 VOXX•DEI LLC. All rights reserved.
Module Connects To
Conn./Pin Color Description Wire Location (+/-) Wire Color
H3/2 Blue No Connection No Connection
H3/3 Red/White No Connection No Connection
H3/4 White/Violet No Connection No Connection
H3/5 Violet/Black No Connection No Connection
H3/6 White/Black (-) Hood Input [1] The installation of an aftermarket hood pin is only required on vehicles that
are not equipped with a factory hood pin, or if not supported in data.
H3/7 Pink/White No Connection No Connection
H3/8 Violet No Connection No Connection
H3/9 Pink No Connection No Connection
H3/10 Blue/White No Connection No Connection
D2D 4-pin white connector (H4)
Module
Conn./Pin Color Description
H4/1 Blue (Data) TX
H4/2 Black (-) Ground
H4/3 Green (Data) RX
H4/4 Red (+) 12 Volt
RF 2-pin white connector (H5)
Module
Conn./Pin Color Description
H5/1 N/A No Connection
H5/2 N/A No Connection
Otros manuales para 403.CHRYSLER3
1
Tabla de contenidos
Otros manuales de Accesorios para automóviles de Directed
Directed
Directed Directechs DB3 Manual de usuario
Directed
Directed Directechs DB3 Manual de usuario
Directed
Directed VOXX DEI 403.VW14 v2.11 Manual de usuario
Directed
Directed Directechs DB3 Manual de usuario
Directed
Directed 403.CHRYSLER6 Manual de usuario
Directed
Directed Directechs DS3 Manual de usuario
Directed
Directed 933.MIT3 Manual de usuario
Directed
Directed DS3+ Manual de usuario
Directed
Directed DS4+ Manual de usuario
Directed
Directed Directechs DB3 Manual de usuario
Directed
Directed Directechs DB3 Manual de usuario
Directed
Directed 933.SUBARU5 Manual de usuario
Directed
Directed Directechs DB3 Manual de usuario
Directed
Directed VW02 Manual de uso y cuidado
Directed
Directed Directechs DB3 Manual de usuario
Directed
Directed DIRECTWIRE DIRECTECHS THGMN4 Manual de usuario
Directed
Directed Directechs DB3 Manual de usuario
Directed
Directed DS4+ Manual de usuario
Directed
Directed Directechs DB3 Manual de usuario
Directed
Directed Directechs DB3 Manual de usuario
