Digital Watchdog DWC-LPR650U Manual de usuario

Quick Start Guide

Tel: +1 (866) 446-3595 / (813) 888-9555

Technical Support Hours:

9:00AM – 8:00PM EST, Monday through Friday

digital-watchdog.com

Attention: This document is intended to serve as a quick reference for the initial

setup. It is recommended that the user read the entire instruction manual for com-

plete and proper installation and usage.

NOTE: Download all your support materials and tools in one place.

1. Go to: http://www.digital-watchdog.com/resources.

2. Search your product by entering the part number in the

‘Search by Product’ search bar. Results for applicable

part numbers will populate automatically based on the

part number you enter.

3. Click ‘Search’. All supported materials, including manuals

and quick start guide (QSGs) will appear in the results.

DWC-LPR650U

WHAT’S IN THE BOX

Manual 1

Screws and

plastic

anchors – 4pcs

1 set

Mounting

template 1Star wrench 1

Test video cable 1DC plug cable 1

Moisture

absorber and

absorber guide

(recommended)

1 set

STEP 1 – PREPARING TO MOUNT THE CAMERA STEP 3 – MOUNTING AN LPR CAMERA

Quick Start Guide

STEP 2 – CABLING THE CAMERA

Pass the wires through the mount bracket and make all necessary

connections. Connect the BNC cable and power cables to the camera.

Power requirements Power consumption

DC12V/AC24V dual voltage DC12V (LED on): 6.12W

AC24V (LED on): 5.7W

DW® Universal HD over Coax® LPR cameras

THE CAPTURED IMAGE SHOULD BE FILLED WITH THE FULL WIDTH OF THE VEHICLES

THE CAMERA SHOULD BE MOUNTED AT AN ANGLE NO GREATER THAN 30 DEGREES

CAMERA ANGLE NO GREATER THAN 20 DEGREES FOR SIDE MOUNT INSTALLATIONS

>11.5ft

< 30

< 20

Please cut the card type absorber along

a dotted line, overlap and attach them

according to the direction of the arrow.

Please cut the card type absorber along

a dotted line, overlap and attach them

according to the direction of the arrow.

1. The mounting surface must withstand ﬁve times the camera weight.

2. Do not let the cables get caught in improper places or the electric line

cover can be damaged. This may cause a short or ﬁre.

3. Install the moisture packet in the base of the camera’s lens.

a. Remove the moisture absorber from the packaging.

b. Cut the card and folder along the dotted line.

c. Place the moisture absorber behind the camera’s lens module. See

drawing for more information.

4. Using the mounting template sheet or the camera itself, mark and drill

the necessary holes in the wall or ceiling.

WARNING: It is highly recommended that you install the moisture

absorber when mounting the camera. The moisture

absorber prevents moisture from being captured

inside the camera's housing, which may cause image

performance issues and damage the camera.

NOTE: The camera will generate enough heat to dry moisture

during operation. In most cases it will not need the

moisture absorber for more than the ﬁrst day. In cases

where the camera can experience a moisture issue,

users must keep the moisture absorber in the camera.

The moisture absorber has an approximately 6-month

life cycle, varying depending on the environment.

Torx Wrench DC Plug Cable Test Video Cable

ManualTemplate Sheet Screw & Moisture absorber &

Absorber Guide

Sunshield cover &

Rev Date: 04/21

Speciﬁcations and pricing are subject to change without notice.

Quick Start Guide

1. The camera supports HD-Analog, HD-CVI and HD-TVI signals. To switch between the signals:

a. Remove the camera’s dome to access the joystick and OSD control on the base of the camera.

b. Use the OSD Switch to switch the camera’s signal.

• To switch the camera to HD-TVI mode, press OSD joystick to the left for 5 seconds.

• To switch the camera to HD-Analog mode, press OSD joystick to the right for 5 seconds.

• To switch the camera to CVBS mode, press OSD joystick up for 5 seconds.

• To switch the camera to HD- CVI mode, press OSD joystick down for 5 seconds.

STEP 5 – INSTALLING THE CAMERASTEP 4 – CHANGING THE SIGNAL IN THE CAMERA

Zoom lever

Wide Tele

Focus lever

Far Near

Test video connector for

on-site conﬁguration

1. Once all cables have been connected, use the screws included with the camera to properly mount

and secure the camera to the mounting surface.

2. To adjust the camera’s tilt, loosen the screws at the base of the camera’s bracket.

The camera’s max angles are:

Pan: 0°~ 360°

Tilt: 0°~ 90°

3. To adjust the camera’s focus and zoom:

a. Remove the sun-shield and front case from the camera.

b. Unlock the zoom or focus screws by rotating them counterclockwise.

c. Use the wrench included to adjust the zoom and focus screws at the base

of the camera module to achieve a clear image.

d. Tighten the screws and close the front case

by rotating it clockwise.

HD-AHD-TVI

CVBS(960H)

HD-CVI

Enter R

Right

2ND

EX-CON

Down

Otros manuales para DWC-LPR650U

Otros manuales de Cámara de seguridad de Digital Watchdog

Digital Watchdog

Digital Watchdog MEGAPIX DWC-MB44Wi650 Manual de usuario

Digital Watchdog

Digital Watchdog Star-Light Plus DWC-MC553WTIR Manual de usuario

Digital Watchdog

Digital Watchdog Megapix DWC-MTT4Wi6 Manual de usuario

Digital Watchdog

Digital Watchdog Snapit DWC-V4363D Manual de usuario

Digital Watchdog

Digital Watchdog PTZ37X Manual de usuario

Digital Watchdog

Digital Watchdog x12 WDR PTZ Manual de usuario

Digital Watchdog

Digital Watchdog x39 Manual de usuario

Digital Watchdog

Digital Watchdog DWC-MB45iALPRTW Manual de usuario

Digital Watchdog

Digital Watchdog DWC-V4567WD Manual de usuario

Digital Watchdog

Digital Watchdog Star-Light Plus DWC-VA553WTIR Manual de usuario

Digital Watchdog

Digital Watchdog Snapit DWC-D4363D Manual de usuario

Digital Watchdog

Digital Watchdog MEGApix DWC-MTT4WiA Manual de usuario

Digital Watchdog

Digital Watchdog Star-Light Plus DWC-D3863WTIRW Manual de usuario

Digital Watchdog

Digital Watchdog Starlight DWC-B6563DIR Manual de usuario

Digital Watchdog

Digital Watchdog MEGApix DWC-MV85WiAT Manual de usuario

Digital Watchdog

Digital Watchdog MEGApix DWC-MVC8WiATW Manual de usuario

Digital Watchdog

Digital Watchdog MEGApix DWC-MB75Wi4T Manual de usuario

Digital Watchdog

Digital Watchdog MEGApix DWC-MT94WiAT Manual de usuario

Digital Watchdog

Digital Watchdog DWC-D2252DIR Manual de usuario

Digital Watchdog

Digital Watchdog STAR-LIGHT DWC-V4283WTIR Manual de usuario

Digital Watchdog

Digital Watchdog MegaPix Pano DWC-PVF5M1TIRC6 Manual de usuario

Digital Watchdog

Digital Watchdog Star-Light Plus DWC-D4583WTIR Manual de usuario

Digital Watchdog

Digital Watchdog Infinity OMNI-Plus V1382TIR Manual de usuario

Digital Watchdog

Digital Watchdog INFINITY 960H SNAP-IT DWC-D4567WD Manual de usuario

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Vicon

Vicon V662-D-1 Instrucciones de funcionamiento

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario