Digi ConnectPort X4 H Manual de usuario

Quick Start Guide

ConnectPort® X4 H

Welcome to your Digi product

Get started: This guide helps you with initial product setup. Need more? Find additional

product support at www.digi.com/support/ConnectPortX4. Or connect to the online

documentation by scanning this code:

Digi Technical Support: Digi offers multiple support plans to help you get the most out of your

product. For information on Technical Support plans and pricing, contact us at 877.912.3444 or

visit www.digi.com/support.

Documentation Feedback: To provide feedback on this documentation, send your comments

to techcomm@digi.com.

1Verify your components

Included equipment

Connect Port X4 H Cellular/WiMAX antenna

Ethernet cable Wire whip antenna

Verify that you have all included equipment. If any item is missing or damaged, contact your supplier.

Note If your device uses a SIM card, it must be supplied and activated by a cellular service provider for device operation.

2Open the device

Unscrew and open the lid. Be sure to note that the top of the enclosure is hinged to the base on the power cord side.

Digi, Digi International, and the Digi logo are trademarks or registered trademarks in the United States and other countries worldwide. All other trademarks mentioned in this

document are the property of their respective owners.

3Install SIM/Ethernet

Note If your device uses a SIM card, you must insert the SIMcard. If your device does not use a SIMcard, you can skip this step.

a. Insert the SIMcard as shown.

Install the primary SIMcard in the upper

SIMslot, with the contacts face down.

Install the secondary SIM card in the

lower slot, with the contacts face up. In

both cases, insert the end of the SIM

card with the chamfered corner first.

b. Connect one end of the Ethernet cable

to the ConnectPort X4 H and the other

end to the PC.

4Connect the hardware

a. Connect the wire whip antenna.

b. Connect the cellular antenna.

c. Power up the unit by connecting the ACpower cord to a proper power source.

d. After you have connected all the hardware, you must configure the unit. For configuration information, see the ConnectPort X4 Getting

Started Guide, which you can download from www.digi.com/ConnectPortX4.

5Complete the device setup

a. Remove power from the unit by disconnecting the power source.

b. Remove the Ethernet cable.

c. Replace the screws that were removed in Step 2.

Note Digi recommends that you use 4 to 5 inches per pound of torque when tightening the screws. You should tighten the screws in a

criss-cross pattern to ensure that the cover is not bent or skewed during this process.

a. Restore power to the unit by reconnecting the power source. The unit is now ready to use.

6Next steps

For more details about the ConnectPort X4 family, go to: www.digi.com/ConnectPortX4.

Otros manuales para ConnectPort X4 H

Tabla de contenidos

Otros manuales de Enrutador de red de Digi

Digi

Digi Connect EZ 4 Manual de usuario

Digi

Digi TransPort WR11 Manual de usuario

Digi

Digi TransPort WR64 Manual de usuario

Digi

Digi TransPort WR64 Guía de aplicación

Digi

Digi TransPort LR54-AA401 Manual de usuario

Digi

Digi TX64 Manual de usuario

Digi

Digi IX14 Manual de usuario

Digi

Digi TransPort WR54 Guía de aplicación

Digi

Digi WR41-G Manual de usuario

Digi

Digi TransPort WR11 Manual del operador

Digi

Digi TransPort WR11 Manual de usuario

Digi

Digi TX54 Manual de usuario

Digi

Digi TransPort WR31 Instrucciones de instalación

Digi

Digi XPress Manual de usuario

Digi

Digi 34 Instrucciones de instalación y funcionamiento

Digi

Digi IX14 Manual de usuario

Digi

Digi TransPort WR41 Manual de usuario

Digi

Digi TransPort WR41 Manual de usuario

Digi

Digi AnywhereUSB Series Manual de usuario

Digi

Digi IR4420 Manual de usuario

Digi

Digi Connect IT 4 Manual de usuario

Digi

Digi IX10-00G4 Manual de usuario

Digi

Digi Connect Series Guía del usuario

Digi

Digi TransPort WR31 Manual de usuario

Manuales populares de Enrutador de red de otras marcas

Allnet

Allnet ALL0333AU Manual de usuario

HomeSeer

HomeSeer HT-SEL Manual de usuario

Sercomm

Sercomm Genesis OC3505D Manual de usuario

Billion

Billion BIPAC 5102 Series Manual de usuario

TP-Link

TP-Link TD-8817 Manual de usuario

Motorola

Motorola MR1900 Manual de usuario

Cisco

Cisco NCS 540 Manual

XAVi

XAVi X8821e Manual de usuario

BEC

BEC 6200WZL Manual de usuario

MikroTik

MikroTik hAP ac3 Series Manual de usuario

Korenix

Korenix JetNet 5428G Series Manual de usuario

NETGEAR

NETGEAR FS526T - Switch Manual de usuario

Korenix

Korenix JetNet 5710G Series Manual de usuario

Automated Logic

Automated Logic ZN551 Manual del propietario

Cisco

Cisco ASR 1000 Series Manual del operador

EnGenius

EnGenius ESR-9710 Manual de usuario

Cisco

Cisco 805 Series Instrucciones de funcionamiento y seguridad

LevelOne

LevelOne FBR-1416 Manual de usuario