Digi-tech Whammy DT Manual de usuario

These symbols are internationally accepted symbols that warn of potential

hazards with electrical products. The lightning ash means that there are

dangerous voltages present within the unit. The exclamation point

indicates that it is necessary for the user to refer to the owner’s manual.

These symbols warn that there are no user serviceable parts inside the

unit. Do not open the unit. Do not attempt to service the unit yourself.

Refer all servicing to qualied personnel. Opening the chassis for any

reason will void the manufacturer’s warranty. Do no get the unit wet. If

liquid is spilled on the unit, shut it o immediately and take it to a dealer

for service.

Disconnect the unit during storms to prevent damage.

If you want to dispose this product, do not mix it with general household waste. There is a

separate collection system for used electronic products in accordance with legislation that

requires proper treatment, recovery and recycling.

Private household in the 25 member states of the EU, in Switzerland and Norway may return their used

electronic products free of charge to designated collection facilities or to a retailer (if you purchase a similar

new one).

For Countries not mentioned above, please contact your local authorities for a correct method of disposal.

By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery and

recycling and thus prevent potential negative effects on the environment and human health.

ELECTROMAGNETIC COMPATIBILITY

This device complies with part 15 of the FCC Rules and

the Product Speciﬁcations noted on the Declaration

of Conformity. Operation is subject to the following

two conditions:

• this device may not cause harmful

interference, and

•this device must accept any interference received,

including interference that may cause undesired

operation.

Operation of this unit within signiﬁcant

electromagnetic ﬁelds should be avoided.

•use only shielded interconnecting cables.

DECLARATION OF CONFORMITY

Manufacturer’s Name: DigiTech

Manufacturer’s Address: 59 Hwagok-ro 61gil, Gangseo-gu

Seoul 07590, Republic of Korea

declares that the product:

Product name: Whammy DT

Product option: all (requires Class II power adapter that

conforms to the requirements of EN60065,

EN60742, or equivalent.)

conforms to the following Product Specications:

Safety: IEC 60065 -01+Amd 1

EMC: EN 55022:2006

EN 55024:1998

FCC Part 15

Supplementary Information:

The product herewith complies with the requirements of the:

Low Voltage Directive 2006/95/EC

EMC Directive 2004/108/EC.

RoHS Directive 2002/95/EC

WEEE Directive 2002/96/EC

EC Regulation 278/2009

With regard to Directive 2005/32/EC and EC Regulation

1275/2008 of 17 December 2008, this product is designed,

produced, and classied as Professional Audio Equipment and

thus is exempt from this Directive.

Contact: Your local DigiTech Sales and Service Oce or

CORTEK Corp.

59 Hwagok-ro 61gil, Gangseo-gu

Seoul 07590, Republic of Korea

[email protected]

Warning

For your protection, please read the following:

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Do not use this apparatus near water.

5. Clean only with dry cloth.

6. Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

7. Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including

ampliers) that produce heat.

8. Protect the power cord from being walked on or

pinched particularly at plugs, convenience receptacles,

and the point where they exit from the apparatus.

9. Unplug this apparatus during lightning storms or when

unused for long periods of time.

10. No user serviceable parts inside. Refer all servicing to

qualied service personnel. Servicing is required when

the apparatus has been damaged in any way, such as

power-supply cord or plug is damaged, liquid has been

spilled or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture, does

not operate normally, or has been dropped.

11. WARNING: To reduce the risk of re or electric

shock, do not expose this apparatus to rain or

moisture.

12. Refer to labels on the unit, including bottom cover, or

other markings and pertinent information.

Warranty

We at

DigiTech

® are very proud of our products and back-up each one we sell with the following warranty:

1. Please register online at www.digitech.com within ten days of purchase to validate this warranty. This

warranty is valid only in the United States.

2. DigiTech warrants this product, when purchased new from an authorized U.S. DigiTech dealer and

used solely within the U.S., to be free from defects in materials and workmanship under normal use and

service. This warranty is valid to the original purchaser only and is non-transferable.

3. DigiTech liability under this warranty is limited to repairing or replacing defective materials that show

evidence of defect, provided the product is returned to DigiTech WITH RETURN AUTHORIZATION,

where all parts and labor will be covered up to a period of one year. A Return Authorization number

may be obtained from DigiTech by telephone. The company shall not be liable for any consequential

damage as a result of the product’s use in any circuit or assembly.

4. Proof-of-purchase is considered to be the responsibility of the consumer. A copy of the original

purchase receipt must be provided for any warranty service.

5. DigiTech reserves the right to make changes in design, or make additions to, or improvements upon this

product without incurring any obligation to install the same on products previously manufactured.

6. The consumer forfeits the benets of this warranty if the product’s main assembly is opened and

tampered with by anyone other than a certied DigiTech technician or, if the product is used with AC

voltages outside of the range suggested by the manufacturer.

7. The foregoing is in lieu of all other warranties, expressed or implied, and DigiTech neither assumes nor

authorizes any person to assume any obligation or liability in connection with the sale of this product. In

no event shall DigiTech or its dealers be liable for special or consequential damages or from any delay in

the performance of this warranty due to causes beyond their control.

NOTE: The information contained in this manual is subject to change at any time without notication. Some

information contained in this manual may also be inaccurate due to undocumented changes in the product or

operating system since this version of the manual was completed.The information contained in this version of

the owner’s manual supersedes all previous versions.

Introduction

Congratulations on the purchase of your new Whammy™ DT Pedal. When DigiTech invented

the Whammy pedal, it was the most revolutionary and innovative pedal to hit the guitar since the

wah wah. We have now taken the Whammy innovation even further with the introduction of the

Whammy DT. The Whammy DT oers the same great Whammy eects as the original Whammy, but

takes your sound to a whole new level by adding the following:

•

Additional Whammy effects

•

Drop Tune and Raised Tuning effects for instant polyphonic re-tuning of your bass or guitar

•

Momentary switch for hammer-on/pull-off effects

•

Switchable True Bypass and DSP Bypass modes

•

Footswitch Input Jack for hands free operation using the optional FS3X Footswitch

Although the Whammy DT has an extremely intuitive user interface, this owner’s manual will help you

understand the Whammy DT functions and allow you to get the most out of your purchase for years

to come.

Included Items

The utmost care was taken while your Whammy DT was being manufactured. Everything should be

included and in perfect working order. Before you get started, please make sure that the following

items have been included:

•

Whammy DT Pedal

•

Power Supply

•

Owner’s Manual

•

Warranty Registration Information Card

If anything is missing, contact the factory at once. Please take a moment to complete your warranty

card. It is your safeguard should a problem arise with your Whammy.

Guided Tour

Detailed Description

Whammy Effect Switch

This switch turns the Whammy, Harmony or Detune eect on or o.

Whammy Effect Status LED

This LED lights to indicate the Whammy, Harmony or Detune eect is on. When the Whammy

eect is bypassed, this LED will be o.

Whammy LEDs

One of these LEDs will light when a Harmony, Whammy or Detune eect is selected. Harmony

eects have dry signal added to the eect signal. Whammy and Detune eects do not have dry

signal added to the eect signal.

Whammy Effect Selector Knob

This knob is used to select the Whammy (bend), Harmony intervals, or Detune range controlled

by the expression pedal.

Expression Pedal

This pedal is used to control the pitch bending amount of the selected Harmony, Whammy, or

Detune eect. Rocking it forward (toe down) increases the amount of pitch bending while rocking

it back (toe up) decreases the amount of pitch bending.

Drop Tune Effect Selector

This knob selects the shift interval for the Drop Tune eect.

Drop Tune LEDs

One of these LEDs will light when a Drop Tune eect is selected.

Drop Tune Effect Status LED

This LED lights to indicate the Drop Tune eect is on. When the Drop Tune eect is bypassed,

this LED will be o.

Drop Tune Effect Switch

This switch turns the Drop Tune eect on and o.

10.

Momentary Switch

This switch momentarily turns the Drop Tune eect on or o to create hammer-on and pull-o

style shifting eects.

11.

Instrument Input

Connect your instrument to this jack.

12.

MIDI Input

Connect any external MIDI device to this jack for the purpose of controlling the Whammy

remotely.

13.

Footswitch Input

An optional FS3X Footswitch can be plugged in here for hands free eect selection (see page 18

for more information).

14.

Power Input

Connect the provided power supply to this jack. Do not use any power supply other than the

supplied power supply.

15.

Output Jack

This jack contains a mix of your dry guitar signal and the pitch shifted signal produced by the

Whammy.

Making Connections

The Whammy DT pedal is extremely easy to set up and use. Follow these steps to get up and run-

ning.

1. Connect your instrument to the instrument

Input Jack.

2. Connect from the Whammy’s

Output Jack

to your favorite distortion pedal or to your amplier.

3. If using an external MIDI device for control, connect from the MIDI out of the MIDI device to the

Whammy’s

MIDI Input.

4. Connect the included power supply to an AC outlet and the other end to the Whammy’s

Power

Input.

5. Turn on your amp and adjust the volume to the desired level.

6. Use the

WHAMMY

and

DROP TUNE Footswitches

to enable the desired eects, then rotate

the

WHAMMY

and

DROP TUNE Knobs

to select the desired eects.

Output

Effects

The Whammy DT is a powerful pitch shifting pedal that oers both Drop and Raised re-tuning of

your instrument and classic Whammy pitch bending eects simultaneously. The left side of the pedal

allows you to select from one of the traditional Whammy eects: Whammy, Harmony and Detune;

the Expression Pedal will then control the bend of the selected Whammy eect. The right side of the

pedal interface controls the Drop Tuning (Shift Down) and Raised Tuning (Shift Up) options.

Whammy Effects

This group of eects will bend your incoming signal either up or down depending upon the eect set-

ting you have chosen. As the Expression Pedal is rocked back and forth, the signal will bend from the

original input pitch (toe up), to the pitch specied by the selected eect setting (toe down). This eect

can be used in combination with the Drop Tune eect. Whammy eects include:

2 OCT UP –

Bends your input note two octaves up.

1 OCT UP –

Bends your input note one octave up.

5TH UP –

Bends the input note 7 semitones (5th interval) up.

4TH UP –

Bends the input note 5 semitones (4th interval) up.

2ND DN –

Bends the input note 2 semitones (2nd interval) down.

4TH DN –

Bends the input note 5 semitones (4th interval) down.

5TH DN –

Bends the input note 7 semitones (5th interval) down.

1 OCT DN –

Bends your input note one octave down.

2 OCT DN –

Bends your input note two octaves down.

DIVE BOMB –

Bends your input note three octaves down.

Otros manuales para Whammy DT

Tabla de contenidos

Otros manuales de Pedal de música de digi-tech

digi-tech

digi-tech Modeling Guitar Processor and USB Recording Interface... Manual de usuario

digi-tech

digi-tech GSP 21 Legend Manual de usuario

digi-tech

digi-tech BRIAN MAY RED SPECIAL PEDAL Manual de usuario

digi-tech

digi-tech PDS3500 Manual de usuario

digi-tech

digi-tech Genesis 1 Manual de usuario

digi-tech

digi-tech RP55 Manual de usuario

digi-tech

digi-tech BP-90 Manual de usuario

digi-tech

digi-tech Drop Manual de usuario

digi-tech

digi-tech TRIO Band Creator Manual de usuario

digi-tech

digi-tech JamMan Solo Manual de usuario

digi-tech

digi-tech Distortion Factory DF-7 Manual de usuario

digi-tech

digi-tech Genesis 1 Manual de usuario

digi-tech

digi-tech HARDWIRE CM-2 Manual de usuario

digi-tech

digi-tech Genesis 3 Manual de usuario

digi-tech

digi-tech GSP5 Manual de usuario

digi-tech

digi-tech Whammy pedal Manual de usuario

digi-tech

digi-tech PDS1550 Manual de usuario

digi-tech

digi-tech JAMMAN STEREO Manual de usuario

digi-tech

digi-tech TRIO Plus Manual de usuario

digi-tech

digi-tech RPX400 Manual de usuario

digi-tech

digi-tech SCREAMINBLUES Manual de usuario

digi-tech

digi-tech Bass Whammy Manual de usuario

digi-tech

digi-tech GNX1 Manual de usuario

digi-tech

digi-tech RP500 Manual de usuario

Manuales populares de Pedal de música de otras marcas

Behringer

Behringer ULTRA WAH UW300 Manual de usuario

Whirlwind

Whirlwind oc-bass Manual de usuario

Strymon

Strymon Lex-rotary Manual de usuario

Behringer

Behringer PB600 Manual de usuario

Lexicon

Lexicon MX200 Manual de usuario

Dunlop

Dunlop Hendrix 68 Shrine Octavio Fuzz Series Manual de usuario

Matthews Effects

Matthews Effects Whaler V2 Manual de usuario

Grid 1

Grid 1 Pedal Jeanie Manual de usuario

Amptweaker

Amptweaker tightboost Manual de usuario

Ibanez

Ibanez TS-808 Tube Screamer Overdrive Pro Manual de usuario

PuzzleSounds

PuzzleSounds DR. Q ENVELOPE FILTER Manual de usuario

BYOC

BYOC Analog Chorus Manual

Dimavery

Dimavery EPVP-50 Manual de usuario

Tefi Vintage Lab

Tefi Vintage Lab GEGÈ Manual de usuario

Pro-MIDI

Pro-MIDI G25 Manual de usuario

DW 7000 Manual de usuario

FAMC

FAMC Liquid-Foot Jr. Series Manual de usuario

Dimavery

Dimavery EPOD-50 Overdrive Manual de usuario

digi-tech Whammy DT Manual de usuario

Manuales populares de Pedal de música de otras marcas