DFI NF4 Ultra-DAGF Manual de usuario

84900502

nF4 Ultra-DAGF

nF4-DAGF

System Board

User’s Manual

This publication contains information that is protected by copyright.

No part of it may be reproduced in any form or by any means or

used to make any transformation/adaptation without the prior

written permission from the copyright holders.

This publication is provided for informational purposes only. The

manufacturer makes no representations or warranties with respect to

the contents or use of this manual and specifically disclaims any

express or implied warranties of merchantability or fitness for any

particular purpose.The user will assume the entire risk of the use or

the results of the use of this document. Further, the manufacturer

reserves the right to revise this publication and make changes to its

contents at any time, without obligation to notify any person or

entity of such revisions or changes.

Trademarks

Product names or trademarks appearing in this manual are for

identification purpose only and are the properties of the respective

owners.

Caution

To avoid damage to the system:

• Use the correct AC input voltage range.....

To reduce the risk of electric shock:

• Unplug the power cord before removing the system chassis

cover for installation or servicing. After installation or servicing,

cover the system chassis before plugging the power cord.

Battery:

• Danger of explosion if battery incorrectly replaced.

• Replace only with the same or equivalent type recommend

the manufacturer.

• Dispose of used batteries according to the battery

manufacturer’s

instructions.

FCC and DOC Statement on Class B

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC rules.

These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a residential

installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with

the instruction manual, may cause harmful interference to radio

communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

• Consult the dealer or an experienced radio TV technician for

help.

Notice:

1. The changes or modifications not expressly approved by the

party responsible for compliance could void the user's authority

to operate the equipment.

2. Shielded interface cables must be used in order to comply with

the emission limits.

About this Manual

This user’s manual contains detailed information about the system

board. If, in some cases, some information doesn’t match those

shown in the multilingual manual, the multilingual manual should al-

ways be regarded as the most updated version. The multilingual

manual is included in the system board package.

To view the user’s manual, insert the CD into a CD-ROM drive. The

autorun screen (Mainboard Utility CD) will appear. Click the

“TOOLS” icon then click “Manual” on the main menu.

About the Package

The system board and accessories in the package may not come

similar to the information stated in this manual. This may differ in

accordance to the sales region or models in which it was sold. For

more information about the standard package in your region, please

contact your dealer or sales representative.

Warranty

1. Warranty does not cover damages or failures that arised from

misuse of the product, inability to use the product, unauthorized

replacement or alteration of components and product

specifications.

2. The warranty is void if the product has been subjected to

physical abuse, improper installation, modification, accidents or

unauthorized repair of the product.

3. Unless otherwise instructed in this user’s manual, the user may

not, under any circumstances, attempt to perform service,

adjustments or repairs on the product, whether in or out of

warranty. It must be returned to the purchase point, factory or

authorized service agency for all such work.

4. We will not be liable for any indirect, special, incidental or

consequencial damages to the product that has been modified

or altered.

Table of Contents

Chapter 1 - Introduction

Specifications...................................................................................................................................

Special Features of the System Board..................................................................

Package Checklist......................................................................................................................

Chapter 2 - Hardware Installation

System Board Layout ..........................................................................................................

System Memory..........................................................................................................................

CPU.......................................................................................................................................................

Jumper Settings............................................................................................................................

Rear Panel I/O Ports.............................................................................................................

I/O Connectors..........................................................................................................................

Chapter 3 - BIOS Setup

Award BIOS Setup Utility.................................................................................................

NVRAID BIOS............................................................................................................................

Updating the BIOS..................................................................................................................

Chapter 4 - Supported Softwares

Drivers, Utilities and Software Applications......................................................

Installation Notes.......................................................................................................................

101

113

Introduction

Appendix A - System Error Messages

POST Beep.................................................................................................................................

Error Messages.........................................................................................................................

Appendix B - Troubleshooting

Troubleshooting Checklist...............................................................................................

114

116

Introduction

Chapter 1 - Introduction

Specifications

Processor

• AMD AthlonTM 64 FX / AthlonTM 64 / SempronTM

• Socket 939

Front Side Bus

• 2000MT/s HyperTransport interface

Chipset

• NVIDIA nForce4TM Ultra (nF4 Ultra-DAGF)

NVIDIA nForce4TM (nF4-DAGF)

System Memory

• Four 184-pin DDR SDRAM DIMM sockets

• Supports dual channel (128-bit wide) memory interface

• Supports up to 4GB system memory

• Supports PC2100 (DDR266), PC2700 (DDR333) and PC3200

(DDR400) DDR SDRAM DIMM

• Supports x8/x16 ECC/non-ECC unbuffered DIMMs, up to

512Mb DDR devices

Expansion Slots

• 1 PCI Express x16 slot

• 2 PCI Express x1 slots

• 3 PCI slots

BIOS

• Award BIOS

• 4Mbit flash memory

Introduction

Energy Efficient Design

• Supports ACPI specification and OS Directed Power

Management

• Supports ACPI STR (Suspend to RAM) function

• Wake-On-Events include:

- Wake-On-PS/2 Keyboard/Mouse

- Wake-On-USB Keyboard/Mouse

- Wake-On-LAN

- Wake-On-Ring

- RTC timer to power-on the system

• AC power failure recovery

Hardware Monitor

• Monitors CPU/system temperature

• Monitors VCC3/12V/3.3V/5VSB/Vbat voltages

• Monitors the speed of the cooling fans

• CPU Overheat Protection function monitors CPU temperature

during system boot-up

Onboard Audio Features

• 6-channel audio CODEC

• True stereo line level outputs

• S/PDIF-in/out interface

Onboard LAN Features

• Vitesse VSC8201 Gigabit Phy

• Fully compliant to IEEE 802.3 (10BASE-T), 802.3u (100BASE-TX)

and 802.3ab (1000BASE-T) standards

• Integrated power management functions

• Supports IEEE 802.3u auto-negotiation

• Supports wire for management

IDE Interface with NVIDIA RAID

• Supports two IDE connectors that allows connecting up to four

UltraDMA 133Mbps hard drives

• NVIDIA RAID allows RAID arrays spanning across Serial ATA

and Parallel ATA

• RAID 0 and RAID 1

Introduction

Serial ATA Interface with NVIDIA RAID

• Supports four Serial ATA ports

• SATA speed up to 3Gb/s (nF4 Ultra-DAGF)

SATA speed up to 1.5Gb/s (nF4-DAGF)

• NVIDIA RAID allows RAID arrays spanning across Serial ATA

and Parallel ATA

• RAID 0 and RAID 1

IEEE 1394 Interface

• VIA VT6307

• Supports two 100/200/400 Mb/sec ports

Rear Panel I/O Ports

• 1 mini-DIN-6 PS/2 mouse port

• 1 mini-DIN-6 PS/2 keyboard port

• 2 S/PDIF RCA jacks (S/PDIF-in and S/PDIF-out)

• 1 parallel port

• 1 serial port

• 1 IEEE 1394 port

• 1 RJ45 LAN port

• 4 USB 2.0/1.1 ports

• Line-in, line-out and mic-in jacks

I/O Connectors

• 3 connectors for 6 additional external USB 2.0/1.1 ports

• 1 connector for 1 external IEEE 1394 port

• 1 front audio connector for external line-out and mic-in jacks

• 1 CD-in internal audio connector

• 1 S/PDIF connector for optical cable connection

• 1 IrDA connector

• 4 Serial ATA connectors

• 2 IDE connectors

• 1 floppy connector

• 1 24-pin ATX power connector

• 1 4-pin ATX 12V power connector

• 1 front panel connector

• 3 fan connectors

Introduction

PCB

• ATX form factor

• 22cm (8.66") x 30.5cm (12")

Special Features of the System Board

AMD AthlonTM 64

The system board supports the AMD AthlonTM 64 processor. AMD

AthlonTM 64 provides superior computing for many software

applications by allowing both 32-bit and 64-bit applications to run

simultaneously on the same platform. The operating system and

software are able to process more data and access a tremendous

amount of memory which improves the overall system performance.

2T timing which provides better system stability is supported in CG

or later revisions of the AMD AthlonTM 64 processor. You can select

the memory timing in the Genie BIOS Setting submenu (“DRAM

Configuration” section) of the BIOS.

AMD Cool‘n’QuietTM Technology

The AMD Cool‘n’QuietTM technology allows the system to detect the

CPU’s tasks and utilization status. When the CPU’s task slows down,

the system effectively lowers power consumption by lowering its

CPU speed and voltage, subsequently decreasing its noise level.

PCI Express

PCI Express is a high bandwidth I/O infrastructure that possesses

the ability to scale speeds by forming multiple lanes. The system

board currently supports the physical layer of x1 and x16 lane

widths.

The x1 PCI Express lane supports transfer rate of 2.5 Gigabytes

(250MBbps) per second.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Placa madre de DFI

DFI

DFI CS551-Q370 Manual de usuario

DFI

DFI G4S601-B Manual de usuario

DFI

DFI 586ITX Manual de usuario

DFI

DFI G586OP Manual de usuario

DFI

DFI M8M051 Manual de usuario

DFI

DFI HD100-H81 Manual de usuario

DFI

DFI SD100-H110/Q170 Manual de usuario

DFI

DFI CP330-NRM Manual de usuario

DFI

DFI KD632-C236 Manual de usuario

DFI

DFI CMS631-Q470E Manual de usuario

DFI

DFI SD630-H110 Manual de usuario

DFI

DFI CB60-BX Manual de usuario

DFI

DFI Infinity NF650I Ultra Manual de usuario

DFI

DFI CR100-CRM Manual de usuario

DFI

DFI AK34-SC Manual de usuario

DFI

DFI G586SP Manual de usuario

DFI

DFI LanParty DK P35 series Manual de usuario

DFI

DFI NP951-B16C Manual de usuario

DFI

DFI CS631-C246/Q370 Manual de usuario

DFI

DFI LanParty LT X38 series Manual de usuario

DFI

DFI 586ITB Manual de usuario

DFI

DFI PE10-SA/RAMA Manual de usuario

DFI

DFI 915P-TAG Manual de usuario

DFI

DFI BL600-DR Manual de usuario

Manuales populares de Placa madre de otras marcas

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manual de usuario

DFI nF4 Ultra-DAGF Manual de usuario

Manuales populares de Placa madre de otras marcas