5
WEEKLY TIMER SETTING
1. Press the “”button once and the ”1”will light up which meaning that
you are setting a timer setting for Monday.
2. If you wish to skip Monday and go to another day, use the + button to
cycle through to 2 (Tuesday), 3 (Wednesday) etc.
3. The ON will also be illuminated on the display to show you are setting
which time for the heater to turn on.
4. Once the desired day number is illuminated, press the “”button a
second time to confirm the day and you will now see the left 2 digits on
the display twinkle. If it is your first time setting a timer, the 2 digits
blinking will usually be 00.
5. Press the “two buttons to set the hours from 01:00-24:00.
6. (01 = 1am, 02 = 2am, 10 = 10am, 14 = 2pm & 00 = Midnight etc.)
7. Once the desired hour is illuminated, press the “ ” button to confirm it
and the second 2 digits on the display start twinkling.
8. Press the “two buttons to set the minutes from 00-59
9. (01 = 1 Minute, 02 = 2 Minute etc.)
10. Press the “ ” button a 4th time –the 2 left digits will twinkle again
oPlease note: The unit’s display will now say OFF showing you
are selecting which time the unit will turn off.
11. Press the “two buttons to set the hours from 01:00-24:00.
12. (01 = 1am, 02 = 2am, 10 = 10am, 14 = 2pm & 00 = Midnight etc.)
13. Press “”button a 5th time and the 2 digits on the right will twinkle.
14. Press the “two buttons to set the hours from 01:00-24:00.
15. (01 = 1am, 02 = 2am, 10 = 10am, 14 = 2pm & 00 = Midnight etc.)
16. Finally, press the “ ” button once more and if the ”2” lights up, it
means you are now setting the timer setting for Tuesday and the Monday
settings have been confirmed.
17. To finish here, don’t press anything for a few seconds and the unit will
revert back to the original display screen but the settings will be saved.
WEEKLY TIMER SETTING –Rest of the Week
If you wish to set timers for the set of the week, once you have selected
Monday’s turn off minutes, press the “”button once more and if the ”2”
lights up, it means you are now setting the timer setting for Tuesday.
To set DIFFERENT times for each day, please repeat the steps starting from the
WEEKLY TIMER SETTING steps to set the timer for the rest of the week.
WEEKLY TIMER SETTING –Temperature
1. To set different temperatures for each day, press the button so that
the 1 is flashing to show you’re setting the temperature for Monday.
2. Press the button and then 1 –will illuminate with a number. Use the
buttons to choose which temperature you want to set for
Monday.
3. Once selected, press again and repeat the steps for 2 (Tuesday).
4. Repeat until the whole week has been set.
WEEKLY TIMER SETTING –Repeat Daily Schedule
To set the SAME times for Monday-Sunday, press the “”button on remote
control 7 times to set from Monday to Sunday’s temperature and press the
“”two buttons to select the temperature you desire between the
temperature range from 10Ԩto 49Ԩ.
You can set different open time, closed time and temperature within whole
week.
