Denver CRD-510 Manual de usuario

Digital Clock Radio

User manual

CRD-510

Importer: xxxxxx

Address: xxxxxx

Overview of the product

1. VOL UP button

2. SCAN button

3. MENU button/INFO button/BACK button

4. POWER button/SOURCE button

5. FORWARD button

6. SELECT button

7. VOL DOWN button

8. BACKWARD button

9. PRESET button

10.ALARM button (AL1/AL2)

11.SLEEP button

12.Display

13.Speaker

14.Antenna

15.Headphone jack

16.USB jack (for charging external devices)

17.DC IN jack

Connecting to power

1. Connect the cord of the power adapter to the DC IN jack of the radio.

2. Connect the plug of the power adapter to a wall socket.

The radio is powered and in standby mode when you see the display is switched on.

Turning on or off

1. Press the POWER button in standby mode to turn the radio on.

2. Press and hold the POWER button when the radio is turned on to switch it to standby

mode. The time show on the display in standby mode.

To completely disconnect the radio from power, remove the plug of the power adapter

from the wall socket.

Setting the clock

The date and time of the radio is automatically set once it receives radio broadcast signals

(and when such info is available). You may also set the date and time through the setting

menu. To do so:

1. Press the POWER button to turn the radio on.

2. Press and hold the MENU button.

3. Press the BACKWARD or FORWARD button until you see “System” on the display and

then press the SELECT button.

4. Press the BACKWARD or FORWARD button until you see “Time” on the display and

then press the SELECT button.

5. Press the BACKWARD or FORWARD button until you see “Set Time/Date” on the

display and then press the SELECT button.

6. Press the BACKWARD or FORWARD button to set hour time and then press the

SELECT button to confirm.

7. Repeat step 6 to continue setting minute time, date, month and year.

** For more date and time settings, see chapter “Time”.

Listening to DAB broadcasts

1. Press the POWER button to turn the radio on.

2. Press the SOURCE button to select DAB mode.

Scanning for DAB stations

The first time you use the radio, or if the station list is empty, the radio automatically

performs a station search. You may also perform a station search manually. To do so:

•In DAB mode, press the SCAN button to activate the automatic station search.

The radio automatically stores radio stations with sufficient signal strength.

After the search is complete, the first stored station is broadcast automatically.

Tuning to a DAB station

1. In DAB mode, the BACKWARD or FORWARD button to cycle through the DAB

stations in the station list.

2. Press the SELECT button to tune to the selected DAB station.

Storing preset stations

You can store up to 10 DAB stations as preset stations.

1. Tune to a DAB station.

2. Press and hold the PRESET button until “Preset Store” shows on the display.

3. Press the BACKWARD or FORWARD button to select a preset number.

4. Press the SELECT button to confirm.

The DAB station is stored with the selected preset number.

Repeat steps 1-4 to store more preset stations.

5. To tune to a preset station, press the PRESET button once, then press the

BACKWARD or FORWARD button to cycle through the list of preset stations and then

press the SELECT button to confirm the selection.

To change the DAB station assigned to a preset number, repeat steps 1 to 4 above to

overwrite the existing DAB station.

Displaying DAB information

Press the INFO button repeatedly to cycle through the following information (if available).

•Dynamic label segment (DLS)

•Signal strength

•Program type (PTY)

•Ensemble name

•Frequency

•Signal error rate

•Bitrate codec

•Time

•Date

Using the DAB menus

1. In DAB mode, press and hold the MENU button to access the DAB menus.

2. Press the BACKWARD or FORWARD button to cycle through the below options.

•Full scan

•Manual tune

•DRC

•Prune

•System

See below for details of each option.

Full scan

Full scan is used to perform a wide range search for DAB stations.

•Press the SELECT button to start scanning for available DAB stations. After the

scanning is complete, the first detected station is broadcast automatically.

Manual tune

1. Press the SELECT button to confirm the selection “Manual tune”.

2. Press the BACKWARD or FORWARD button to tune the frequency manually.

DRC (Dynamic Range Control)

DRC adds or removes a degree of compensation for the differences in the dynamic

range between radio stations.

System

See chapter “System menu” for details.

Selecting FM mode

1. Press the POWER button to turn the radio on.

2. Press the SOURCE button to select the FM mode.

Scanning for FM stations

•In FM mode, press the SCAN or SELECT button to activate the automatic search for

the next available FM station.

•After a strong FM radio station is detected, the search stops. The FM radio station is

broadcast.

Tuning the FM frequency

•In FM mode, press the BACKWARD or FORWARD button to tune down or up the

frequency.

•Once you have tuned up or down the frequency, press the SCAN or SELECT button to

activate the automatic search for the next available FM station in the selected tune up

or down direction.

**Unroll and extend the antenna to improve FM signal reception.

Storing preset stations

You can store up to 10 FM stations as preset stations.

1. Tune to an FM station.

2. Press and hold the PRESET button until “Preset Store” shows on the display.

3. Press the BACKWARD or FORWARD button to select a preset number.

4. Press the SELECT button to confirm.

The FM station is stored with the selected preset number.

Repeat steps 1-4 to store more preset stations.

5. To tune to a preset station, press the PRESET button once, then press the

BACKWARD or FORWARD button to cycle through the list of preset stations and then

press the SELECT button to confirm the selection.

To change the FM station assigned to a preset number, repeat steps 1 to 4 above to

overwrite the existing FM station.

Displaying RDS information

Radio Data System (RDS) is a service that allows FM stations to transmit additional

information. When you tune to an FM radio station that transmits RDS signals, the station

name is displayed.

Press the INFO button repeatedly to cycle through the following RDS information (if

available).

•Radio text

•Program type (such as NEWS, SPORT, POP M)

•Program service

•Time

•Date

Using the FM menu

1. In FM mode, press and hold the MENU button to access the FM menus.

2. Press the BACKWARD or FORWARD button to cycle through the below options.

•Scan setting

•System

See below for details of each option.

Scan setting

1. Press the SELECT button to confirm the selection “Scan setting”.

2. Press the BACKWARD or FORWARD button to cycle through the below options.

The asterisk behind the option indicates the current setting.

•Strong stations only: Search for strong stations only.

•All stations: Search for all stations regardless of the signal strength.

3. Press the SELECT button to confirm the selected option.

System

See chapter “System menu” for details.

Alarm setting

The radio lets you have 2 alarm settings.

To set the alarm:

1. While in radio mode, Press the ALARM button to select between Alarm 1 and Alarm 2

and then press the SELECT button to confirm the selection.

2. Press the BACKWARD or FORWARD button to set the hour time of the alarm and then

press the SELECT button.

3. Press the BACKWARD or FORWARD button to set the minute time of the alarm and

then press the SELECT button.

4. Press the BACKWARD or FORWARD button to cycle through the duration options and

then press the SELECT button to confirm the selection.

The duration defines the time before the radio returns to standby mode if the alarm is

not deactivated.

Duration options: 15, 30, 45, 60, 90 and 120 minutes.

5. Press the BACKWARD or FORWARD button to cycle through the source options and

then press the SELECT button to confirm the selection.

The source defines the sound source of the alarm.

Source options: DAB, FM and Buzzer.

If DAB or FM is selected, you will also be prompted to select the last played station or

one of the preset stations (if set) as the alarm.

6. Press the BACKWARD or FORWARD button to cycle through the interval options and

then press the SELECT button to confirm the selection.

The interval defines on which days the alarm is active.

Interval options: Daily, Once, Weekends and Weekdays.

If “Once” is selected, you will also be prompted to set a specific date.

7. Press the BACKWARD or FORWARD button to adjust the volume level and then press

the SELECT button.

This setting defines the sound volume of the alarm.

8. Press the BACKWARD or FORWARD button to select alarm on or off and then press

the SELECT button to confirm the selection.

When the alarm setting is active, the corresponding alarm icon (A1)for alarm 1 and (A2)

for alarm 2) will show on the display.

At the set time, the alarm will sound. The volume will increase gradually until it reaches

the set volume level. The corresponding alarm icon will also flash on the display.

Turning the alarms on or off in standby mode

1. In standby mode, press the ALARM button repeatedly to cycle through the alarm on or

off settings. See the table below for details.

Pressing ALARM

Alarm 1

Alarm 2

1×

Off

2×

Off

3×

Off

4×

2. Press the SELECT button to confirm the setting.

When the alarm setting is active, the corresponding alarm icon (A1) for alarm 1 and (A2)

for alarm 2 will show on the display.

Deactivating a sounding alarm

Press the POWER button or ALARM button to switch the radio to standby mode.

Snooze

•Snooze buttons: VOL UP, VOL DOWN, BACKWARD, FORWARD and SELECT.

•To temporarily silence a sounding alarm, press one of the SNOOZE buttons. To

change the snooze period, press one of the SNOOZE buttons repeatedly (options: 5,

10, 15 or 30 minutes).

•The radio will return to standby mode during the snooze period. The alarm will sound

again when the snooze period is over.

•To cancel the snooze period and the alarm, press the POWER button.

Sleep

This sleep function defines the duration of time before the radio switches itself off

automatically.

1. When the radio is switched on, press the SLEEP button repeatedly to select a sleep

period (Options: Off, 15, 30, 45, 60 and 90 minutes).

2. Press the SELECT button to confirm the selection.

Once a sleep period is set, the sleep icon ( ) will show on the display. The radio will

automatically switch off when the sleep period is over.

System menu

To access the system menu:

1. Press and hold the MENU button in DAB or FM mode.

2. Press the BACKWARD or FORWARD button to cycle through the options until you see

“System”.

3. Press the SELECT button to confirm the selection “System”.

4. Press the BACKWARD or FORWARD button to cycle through the below options.

•Time

•Backlight

•Inactive Standby

•Language

•Factory Reset

•Software Version

See below for details of each option.

Time

1. Press the SELECT button to confirm the selection “Time”.

2. Press the BACKWARD or FORWARD button to cycle through the below options. The

asterisk behind the option indicates the current setting.

•Set Time/Date

•Auto Update

•Set 12/24 hour

•Set date format

See below for details of each option.

Auto Update

This setting defines how the radio updates the time and date information.

1. Press the SELECT button to confirm the selection “Auto Update”.

2. Press the BACKWARD or FORWARD button to cycle through the below options.

The asterisk behind the option indicates the current setting.

•Update from Any: Update the time and date from any available signals.

•Update from DAB: Update the time and date from DAB signals.

•Update from FM: Update the time and date from FM signals.

•No update: Do not update the time and date.

3. Press the SELECT button to confirm the selected option.

Set 12/24 hour

1. Press the SELECT button to confirm the selection “Set 12/24 hour”.

2. Press the BACKWARD or FORWARD button to cycle through the below time format

options. The asterisk behind the option indicates the current setting.

•12: Show the time in 12-hour format.

•24: Show the time in 24-hour format.

3. Press the SELECT button to confirm the selected option.

Set date format

1. Press the SELECT button to confirm the selection “Set date format”.

2. Press the BACKWARD or FORWARD button to cycle through the below date

format options. The asterisk behind the option indicates the current setting.

•DD-MM-YYYY

•MM-DD-YYYY

3. Press the SELECT button to confirm the selected option.

Tabla de contenidos

Otros manuales de Radio reloj de Denver

Denver

Denver CRP-515 Manual de usuario

Denver

Denver CRB-619 Manual de usuario

Denver

Denver CRL-290 Manual de usuario

Denver

Denver CR-422 Manual de usuario

Denver

Denver CR-490 Manual de usuario

Denver

Denver CRL-310 Manual de instrucciones

Denver

Denver CRP-618 Manual de usuario

Denver

Denver CRLB-400 Manual de usuario

Denver

Denver CRP-912 Manual de usuario

Denver

Denver CRL-330 Manual de usuario

Denver

Denver CRP-612 Manual de usuario

Denver

Denver CRP-717 Manual de usuario

Denver

Denver CR-412 Manual de usuario

Denver

Denver CRL-330 Manual de usuario

Denver

Denver CRP-512 Manual de usuario

Denver

Denver CR-418 Manual de usuario

Denver

Denver CR-416 Manual de usuario

Denver

Denver CRP-714 Manual de usuario

Denver

Denver CR-26 DABPLUS Manual de usuario

Denver

Denver CRP-112 Manual de usuario

Denver

Denver CRP-515 Manual de usuario

Denver

Denver DAB-45PLUS Manual de usuario

Denver

Denver CRL-330 Manual de usuario

Denver

Denver CR-421 Manual de usuario

Manuales populares de Radio reloj de otras marcas

Audiovox

Audiovox CE90 Manual de usuario

Sony

Sony Dream Machine ICF-C763L Manual de usuario

Sanyo

Sanyo DMP-P6 Manual de usuario

RCA

RCA RPC100 Manual de usuario

Yamaha

Yamaha ISX-80 Manual de usuario

Pyle

Pyle PLMR20W Manual de usuario

Blaupunkt

Blaupunkt CR7BK Manual de usuario

Philips

Philips AJ3180 Manual de usuario

HoMedics

HoMedics SS-5500-2EU Manual de usuario

RCA

RCA RC66i Manual de usuario

Versaudio

Versaudio Vers Manual de usuario

SOUNDMASTER

SOUNDMASTER UR8100 Manual de usuario

Audiovox

Audiovox CE90 Manual de usuario

Jensen Audio

Jensen Audio JCR-222 - AM/FM Projection Alarm Clock Radio Manual de usuario

Roberts

Roberts ChronoDAB Manual de usuario

AEG

AEG MRC 4132 BT Manual de usuario

Tokai

Tokai TC-155 Manual de usuario

Timex

Timex T300 Manual de usuario