Denso BHT-6000 Manual de usuario
User's Manual
Copyright © DENSO, 1997
All rights reserved. No part of this publication may be reproduced in any form or by
any means without permission in writing from the publisher.
Specifications are subject to change without prior notice.
Microsoft®, MS-DOS®, and QuickBASIC®are registered trademarks of Microsoft Cor-
poration.
IBM®, PC/AT®, and PS/2®are registered trademarks of International Business Ma-
chines Corporation.
BHT, CU, BHT-protocol, BHT-Ir protocol, and BHT-BASIC 3.0 are trademarks of DENSO
CORPORATION.
i
Preface
Please READ through these operating instructions carefully. It will enable you to
operate your BHT-6000 correctly.
After you have finished reading the instructions, keep this manual handy for speedy
reference.
The BHT-6000 series is available in two types: the normal-range type and long-range
type (BHT-6000D). In this manual, both types are called the BHT-6000 unless otherwise
specified.
ii
How this book is organized
This manual is made up of five chapters and appendices.
Chapter 1. Quick Guide
Describes the basic operating method of the BHT-6000 and the related notes.
Chapter 2. Getting Started the BHT-6000 and System Mode
Summarizes the BHT-6000 system configuration and describes the operation including
preparation and System Mode (which is required for the efficient use of application
programs).
Chapter 3. Communications Operations of BHT-6000
Describes the communications operations of the BHT-6000--the RS-232C interface
specifications, the basic communications specifications, and the communications
protocols--for data transmission with the host computer or other devices.
Chapter 4. Error Messages
Lists the error messages which will appear on the LCD if some error occurs in the BHT-
6000.
Chapter 5. Handling the CU-6000 (Option)
Describes the handling procedure of the CU-6000, the interfacing with the host compu-
ter, and the charging of the Ni-MH battery cartridge.
Appendix A: Specifications
Appendix B: A Typical Basic Operation
Appendix C: Alphabet Input Procedure
iii
■Related Publications
BHT-BASIC 3.0 Programmer's Manual
Transfer Utility Guide
Ir-Transfer Utility C Guide
■Screen Indication
The lettering in the screens in this manual is a little different from that in the actual
screens. File names used are only for description purpose, so they will not appear if
you have not set files having those names.
iv
SAFETY PRECAUTIONS
Be sure to observe all these safety precautions.
■Please READ through this manual carefully. It will enable you to use the BHT-6000
and CU-6000 correctly.
■Always keep this manual nearby for speedy reference.
WARNING Alerts you to those conditions which could cause seri-
ous bodily injury or death if the instructions are not
followed correctly.
CAUTION Alerts you to those conditions which could cause minor
bodily injury or substantial property damage if the in-
structions are not followed correctly.
Meaning of Symbols
A triangle ( ) with a picture inside alerts you to a warning of danger. Here
you see the warning for electrical shock.
A diagonal line through a circle ( ) alerts you to something you should not
do; it may or may not have a picture inside. Here you see a screwdriver
inside the circle, meaning that you should not disassemble.
A black circle ( ) with a picture inside alerts you to something you MUST
do. This example shows that you MUST unplug the power cord.
Strict observance of these warning and caution indications are a MUST for preventing
accidents which could result in bodily injury and substantial property damage. Make
sure you fully understand all definitions of these terms and related symbols given
below, before you proceed to the text itself.
v
WARNING
Handling the battery cartridge
•Never disassemble or heat the battery
cartridge, nor put it into fire or water;
doing so could cause battery-rupture or
leakage of battery fluid, resulting in a
fire or bodily injury.
•Do not carry or store the battery car-
tridge together with metallic ball-point
pens, necklaces, coins, hairpins, etc.
Doing so could short-circuit the termi-
nal pins, causing the batteries to rup-
ture or the battery fluid to leak, result-
ing in a fire or bodily injury.
•Avoid dropping the battery cartridge or letting it undergo any shock
or impact.
Doing so could cause the batteries to break, generate heat, rupture or
burn.
•Only use the dedicated charger (CU-6001
or C-600) for charging the Ni-MH bat-
tery cartridge.
Using a different type of charger could
cause battery-rupture or leakage of bat-
tery fluid and result in a fire, bodily in-
jury, or serious damage to property.
Charge only
with the
dedicated
device.
DedicatedUndedicated
•Never charge the Ni-MH battery cartridge where any inflammable
gases may be emitted; doing so could cause fire.
Never
put me
into fire!
Do not
short-
circuit
me!
vi
WARNING
Handling the CU
•If smoke, abnormal odors or noises come from the CU, immediately
turn off the power, unplug the AC adapter from the wall socket, and
contact your nearest dealer.
Failure to do so could cause fire or electrical shock.
•If foreign material or water gets into the CU, immediately turn off the
power, unplug the AC adapter from the wall socket, and contact your
nearest dealer.
Failure to do so could cause fire or electrical shock.
•If you drop the CU so as to damage its housing, immediately turn off
the power, unplug the AC adapter from the wall socket, and contact
your nearest dealer.
Failure to do so could cause fire or electrical shock.
•Never use the CU for charging anything other than the specified
battery cartridges.
Doing so could cause heat, battery-rupture, or fire.
•Never bring any metals into contact with the output terminals.
Doing so could produce a large current through the CU, resulting in
heat or fire, as well as damage to the CU.
•Use the furnished AC adapter only. Failure to do so could result in
fire.
•Never use the CU on the line voltage other than the specified level.
Doing so could cause the CU to break or burn.
•If the power cord of the AC adapter is damaged (e.g., exposed or
broken lead wires), stop using it and contact your nearest dealer.
Failure to do so could result in a fire or electrical shock.
vii
CAUTION
Basic handling tips
•Never put the BHT in places where there
are excessively high temperatures, such
as inside closed-up automobiles, or in
places exposed to direct sunlight.
Doing so could affect the housing or
parts, resulting in a fire.
•Avoid using the BHT in extremely hu-
mid or dusty areas, or where there are
drastic temperature changes.
Moisture or dust will get into the BHT,
resulting in malfunction, fire or electri-
cal shock.
•Never disassemble or modify the BHT; doing so could result in an
accident such as break or fire.
Never
disassemble
This
humidity
is killing
me!
Hot-
house
I’m
freezing!
Refrigeration
Refrigeration
Refrigeration
I’m burning
up!
Handling the Ni-MH battery cartridge
•Never charge a wet or damp Ni-MH battery cartridge.
Doing so could cause the batteries to break, generate heat, rupture,
or burn.
Handling the BHT
•If smoke, abnormal odors or noises come from the BHT, immediately
turn off the power, pull out the dry batteries or the battery cartridge,
and contact your nearest dealer.
Failure to do so could cause smoke or fire.
•If foreign material or water gets into the
BHT, immediately turn off the power,
pull out the dry batteries or the battery
cartridge, and contact your nearest
dealer.
Failure to do so could cause smoke or
fire.
Keep me
away from
water!
viii
CAUTION
•If you drop the BHT so as to damage its hous-
ing, immediately turn off the power, pull out
the dry batteries or the battery cartridge, and
contact your nearest dealer.
Failure to do so could cause smoke or fire.
•For those machines using dry batteries, do not mistake the plus and
minus marks when loading dry batteries into the BHT.
Failure to do so could cause battery-rupture or leakage of battery
fluid, resulting in bodily injury, fire, or property damage.
•For those machines using dry batteries, do not use anything other
than the specified type of batteries, nor use new and old batteries
together.
Doing so could cause battery-rupture or leakage of battery fluid,
resulting in bodily injury, fire, or property damage.
•Do not use batteries or power sources other than the specified ones;
doing so could generate heat or cause malfunction.
Handling the CU
•If you will not be using the CU for a long time, be sure to unplug the
AC adapter from the wall socket for safety.
Failure to do so could result in a fire.
•When caring for the CU, unplug the AC adapter from the wall socket
for safety.
Failure to do so could result in an electrical shock.
•Never cover or wrap up the CU or AC adapter in a cloth or blanket.
Doing so could cause the unit to heat up inside, deforming its hous-
ing, resulting in a fire.
Always use the CU and AC adapter in a well-ventilated area.
•Do not place the CU anyplace where it may be subjected to oily
smoke or steam, e.g., near a cooking range or humidifier.
Doing so could result in a fire or electrical shock.
Do not
drop
me!
Tabla de contenidos
Otros manuales de Lector de código de barras de Denso
Denso
Denso BHT-4000 Manual de usuario
Denso
Denso BHT-904BB Manual de usuario
Denso
Denso BHT-7000 Manual de usuario
Denso
Denso 400BW-CE Manual de usuario
Denso
Denso BHT-805BWB Manual de usuario
Denso
Denso BHT-800 Series Manual
Denso
Denso GT10Q-SR Manual de usuario
Denso
Denso SE1-BB Manual de usuario
Denso
Denso BHT-1400QWB-CE Manual de usuario
Denso
Denso BHT-8000 Manual de usuario
Denso
Denso GT10B-SU Manual de usuario
Denso
Denso BHT-700-WM Manual de usuario
Denso
Denso BHT-700-CE Manual de usuario
Denso
Denso BHT-300B Manual de usuario
Denso
Denso BHT-7500S Manual de usuario
Denso
Denso BHT-825QW Manual de usuario
Denso
Denso BHT-805BW Manual
Denso
Denso GT10B-SM Manual de usuario
Denso
Denso BTH-300BW Manual de usuario
Denso
Denso BHT-202Q-CE Manual
