Delta Ultron HPH Series Manual de usuario

www.deltapowersolutions.com

The power behind competitiveness

HPH Series, Three Phase

20/30/40 kVA

User Manual

Delta UPS - Ultron Family

NORMAL

BATTERY

BYPASS

FAULT

ON OFF

ESC







(“Manual”), including but not limited to the contents, information, and figures are solely owned and

reserved by Delta Electronics Inc. (“Delta”). The Manual can only be applied to the operation or the

use of this product. Any disposition, duplication, dissemination, reproduction, modication, translation,

extraction, or usage of this Manual in whole or in part is prohibited without the prior written permission

of Delta. Given that Delta will continuously improve and develop the product, changes may be made

to the information in this Manual at any time without obligation to notify any person of such revision

or changes. Delta will make all possible efforts to secure the accuracy and the integrity of this

Manual. Delta disclaims any kinds or forms of warranty, guarantee, or undertaking, either expressly

or implicitly, including but not limited to the completeness, faultlessness, accuracy, non-infringement,

merchantability or tness for a particular purpose of the Manual.

This manual contains important instructions and warnings that you should follow

during the installation, operation, storage and maintenance of this product. Failure

to heed these instructions and warnings will void the warranty.





 

1.1 Placement Warnings ----------------------------------------------------------------- 1

1.2 Connection Warnings ---------------------------------------------------------------- 1

1.3 Usage Warnings ---------------------------------------------------------------------- 1

1.4 Storage Warnings --------------------------------------------------------------------- 2

1.5 Glossary of Symbols ----------------------------------------------------------------- 3

1.6 Standard Compliance ---------------------------------------------------------------- 4

 

2.1 Product Introduction ------------------------------------------------------------------ 5

2.2 Package Inspection ------------------------------------------------------------------ 5

2.3 Functions and Features ------------------------------------------------------------- 6

 

3.1 Appearance and Dimensions ------------------------------------------------------ 8

3.2 Front Panel ----------------------------------------------------------------------------- 9

3.3 Rear Panel ---------------------------------------------------------------------------- 10







6.1 Precautions Prior to Installation and Wiring ---------------------------------- 22

6.2 Installation Environment----------------------------------------------------------- 22

6.3 UPS Transportation & Handling ------------------------------------------------- 23

6.4 UPS Installation --------------------------------------------------------------------- 23

6.5 Wiring ---------------------------------------------------------------------------------- 25

6.5.1 Precautions Prior to Wiring --------------------------------------------- 25

6.5.2 Single Input/ Dual Input Modication -------------------------------- 27

6.5.3 Single Unit Wiring --------------------------------------------------------- 29

6.5.4 Parallel Units Wiring ----------------------------------------------------- 35

6.6 External Battery Cabinet Connection Precautions ------------------------- 37







7.1 Connecting the UPS with the Utility AC Power ------------------------------ 41

7.2 Turn-on -------------------------------------------------------------------------------- 41

7.3 Turn-off -------------------------------------------------------------------------------- 41



8.1 LCD Display Hierarchy ------------------------------------------------------------ 43

8.2 Main Screen -------------------------------------------------------------------------- 44

8.3 Parallel Screen ---------------------------------------------------------------------- 45

8.4 Main Menu ---------------------------------------------------------------------------- 46

8.5 Measure ------------------------------------------------------------------------------- 47

8.6 Maintenance ------------------------------------------------------------------------- 48

















 

y Install the UPS in a well-ventilated indoor area, away from excess moisture, heat, dust,

ammable gas or explosives.

y Leave adequate space around all sides of the UPS for proper ventilation. Please refer to 6.2

Installation Environment.

 

y The UPS must be well grounded due to a possible risk of current leakage.

y It is necessary to install protective devices and 4-pole contactors when the UPS is con-

nected to the mains and bypass source. For relevant information, please refer to 6.5.1

Precautions Prior to Wiring.

y The protective devices connecting to the UPS must be installed near the UPS and must be

easily accessible for operation.

 

y This is a class-A product. In a domestic environment, this product may cause radio interfer-

ence, in which case, the user is required to take adequate measures.

y The UPS can be used to power computers and associated peripheral devices, such as

monitors, modems, cartridge tape drives, external hard drives, etc.

y If the UPS needs to be connected to a motor load, it must be conrmed by qualied ser-

vice personnel.

y It is strictly forbidden to connect the UPS to any loads with reection properties.

y The parallel UPSs can connect with common batteries.

y The external slits and openings in the UPS are provided for ventilation. To ensure reliable

operation of the UPS and to protect the UPS from overheating, these slits and openings

must not be blocked or covered. Do not insert any object into the slits and openings that

may hinder ventilation.

y In a low temperature environment (below 0°C), you must allow the UPS to adjust to room

temperature for at least one hour to avoid moisture condensing inside the UPS before us-

age.

y Do not put beverage containers on the UPS, battery cabinet or any other accessory asso-

ciated with the UPS.





y The risk of dangerous high voltage is possible when the batteries are still connected to the

UPS even though the UPS is disconnected from the mains. Do not forget to pull out the

battery cable to completely cut off the battery source.

y Do not open or mutilate the battery or batteries. The released electrolyte is harmful to the

skin and eyes and may be toxic.

y Do not dispose of the battery or batteries in a re. The batteries may explode.

y All maintenance services must be performed by qualied service personnel. Forbid open-

ing or removing the cover of the UPS to avoid high voltage electric shock.

y You must contact qualied service personnel if either of the following events occur:

1. Liquid is poured or splashed on the UPS.

2. The UPS does not run normally after this User Manual is carefully observed.



If you use the UPS in an area that generates or incurs dust, you should install a dust

lter in the UPS to ensure normal product life and function.

 

y

If the UPS needs to be stored prior to installation, it should be placed in a dry area. The al-

lowable storage temperature is between -15°C and +50°C.

y 

Press the  key ( OFF ) once and the LCD shows the following screen. If you want to

turn off the UPS, please press the key( ). Make sure the UPS is shutdown,

disconnect the UPS from the utility power, remove all equipment from the UPS, and store

the UPS in a dry and well-ventilated area at a temperature between -15°C and +50°C.

Idle batteries must be recharged fully approximately every three months if the UPS needs

to be stored for an extended period of time. The charging time must not be less than 24

hours each time.

SHUT DOWN

YES ( ) NO ( )





 

  



NORMAL

Online mode LED indicator: green



BATTERY

Battery mode LED indicator: yellow



BYPASS

Bypass mode LED indicator: yellow



FAULT

Fault LED indicator: red

ON ON key

OFF OFF key

ESC Goes back to previous screen or cancels current selec-

tion.

Moves down/ Decreases number.

Moves up/ Increases number.

 Conrms selection.



EPO

EPO key

 R R phase of AC Input/ UPS Output

 S S phase of AC Input/ UPS Output

 T T phase of AC Input/ UPS Output

 N Input neutral line/ Output neutral line / Battery neutral line

 For UPS grounding

 For critical load grounding/ For external battery cabinet

grounding

 Positive battery terminal

 Negative battery terminal





 

This product meets the following safety standards and electromagnetic compatibility (EMC)

inspection standards:

y CE

y IEC62040-1

y GB7260.2-2009/ IEC62040-2 C2

y GB17626-2/ IEC61000-4-2 (ESD) Level 4

y GB17626-3/ IEC61000-4-3 (Radiated Field) Level 3

yGB17626-4/ IEC61000-4-4 (EFT) Level 4

y GB17626-5/ IEC61000-4-5 (Surge) Level 4







 

The HPH series UPS is a three-phase four-wire online uninterruptible power supply which

provides reliable and stable sine-wave power to your electronic devices. The UPS applies the

latest design of DSP digital control technology and highest quality assembly, with an output

power factor up to unity. The efciency of the entire device can reach up to 96% in online

mode and up to 99% in ECO mode. With its outstanding features, the UPS not only provides

safe, reliable and uninterrupted power to your sensitive electronic equipment at all times, but

also produces greater electric power efciency at less cost. This HPH series UPS provides

three different rated power levels, 20kVA, 30kVA and 40kVA, for your selection.

 

y 

During UPS transportation, some unpredictable situations might occur. It is recommended

that you inspect the UPS exterior packaging. If you notice any damage, please immedi-

ately contact the dealer from whom you purchased the unit.

y

1. Check the rating label on the top of the UPS cabinet and make sure the device No. and

capacity match what you ordered.

2. Examine if any parts are loose or damaged.

3. The UPS package contains the following items. Please check if any items are missing.

(Male) (Female) (Male) (Male)

EPO

NORMAL

BATTERY

BYPASS

FAULT

ON OFF

ESC

2 3 4





  

UPS 1 pc

User Manual 1 pc

Test Card 1 pc

Software CD-UPSentry 2012 1 pc

RS232 Cable 1 pc

Parallel Cable 1 pc

Mini-card Flat Cable1 pc



1. The balance supports have been locked on the pallet when the UPS is

shipped out of the factory. Please keep them well after unpacking. You might

use them for installation.

2.  The cable connects the UPS and a Delta Mini SNMP card, Mini USB card,

Mini Relay I/O card, or Mini Modbus card. The above-mentioned cards are op-

tional. Please refer to Chapter 9: Optional Accessories.

4. If there is any damage or anything missing, please immediately contact the dealer from

whom you purchased the unit.

5. If the UPS needs to be returned, carefully repack the UPS and all of the accessories

using the original packing material that came with the unit.

 

y The HPH series UPS is designed for systems with medium power. It provides clean power

supply to data systems, communication systems, computer network systems, medical

treatment systems, monitoring systems, factory equipment, etc.

y The HPH series UPS utilizes all digital high frequency modulation technology, which de-

creases volume, improves reliability and prolongs service life.

y Wide AC input voltage range (full load: 173~276/ 300~477Vac; 70% load: 132~173/ 228~

300Vac) reduces frequent transfer from normal mode to battery mode to save battery con-

sumption and prolong battery life.

y Battery test in online mode and regular battery test prolong battery life.

y Automatic input frequency detection enables operation at 50Hz or 60Hz.

Tabla de contenidos

Otros manuales de Unión Postal Universal de Delta

Delta

Delta RT Series Manual de usuario

Delta

Delta Amplon RT Series 5-10kVA Manual de usuario

Delta

Delta Ultron DPM Series Manual de usuario

Delta

Delta Amplon UPS102N2000B035 Manual de usuario

Delta

Delta Ultron HPH series Manual de usuario

Delta

Delta DRU-24V10AMN Manual de instrucciones

Delta

Delta M-1K Manual de usuario

Delta

Delta Modulon DPH series Manual de usuario

Delta

Delta VX Series Manual de usuario

Delta

Delta HPH-60K Manual de usuario

Delta

Delta Amplon Series Manual de usuario

Delta

Delta Amplon RT 5kVA Manual de usuario

Delta

Delta Ultron HPH series Manual de usuario

Delta

Delta N-6K Manual de usuario

Delta

Delta Ultron DPS-400K Manual de usuario

Delta

Delta VX 600VA Instrucciones de funcionamiento originales

Delta

Delta UPS102R2000B0B1 Instrucciones de funcionamiento originales

Delta

Delta Amplon RT Series Manual de usuario

Delta

Delta NH-20k Manual de usuario

Delta

Delta Modulon DPH series Manual de usuario

Delta

Delta Amplon RT Series Manual de usuario

Delta

Delta DPS Series Manual de usuario

Delta

Delta Amplon N Series Manual de usuario

Delta

Delta Amplon Series Manual de usuario

Manuales populares de Unión Postal Universal de otras marcas

Pylontech

Pylontech Victron & Pylontech US5000 Manual de usuario

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Manual de usuario

Mecer

Mecer ME-1000-WTU Manual de usuario

Mustek

Mustek PowerMust 530(B) Plus Manual de instalación y operación

Emerson

Emerson Liebert NXL series Manual de usuario

MAKELSAN

MAKELSAN BOXER SERIES Manual de usuario

Block

Block PC-0524-400-0 Manual de usuario

CyberPower

CyberPower CP585LCD Manual de usuario

Eaton

Eaton 3S Instrucciones de montaje

CyberPower

CyberPower Office Tower Series UPS 1000 Manual de usuario

CyberPower

CyberPower BM100 Manual de usuario

Best Power

Best Power 610 Manual de usuario

Best Power

Best Power Unity/I UT3K Manual de usuario

Mustek

Mustek PowerMust 400 Offline Manual de usuario

Xantrex

Xantrex Trace 512 UR-UPS Manual de usuario

Forza

Forza SL-1501UL Manual de usuario

LEGRAND

LEGRAND keor 310081 Manual de usuario

ABB

ABB Conceptpower DPA 500 Manual de usuario