Dell PowerVault TL4000 Manual de usuario

Getting Started with the Dell™PowerVault™

TL2000 and TL4000 Tape Libraries

Getting Started with the Dell™PowerVault™

TL2000 and TL4000 Tape Libraries

Note!

Before using this information and the product it supports, ensure that you read the general information under Notices in the

Dell PowerVault TL2000 Tape Library and TL4000 Tape Library User’s Guide.

Information in this document is subject to change without notice.

Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.

Trademarks used in this text: Dell, the DELL logo and PowerVault are trademarks of Dell Inc.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks

and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than

its own.

Model TL2000/TL4000

Month 2007 P/N 95P6870

Contents

Safety and Environmental Notices ...v

Danger Notice ..............v

Caution Notice .............v

Laser Safety and Compliance ........vi

Class ILaser Product ..........vi

Rack Safety ..............vi

Installation............. 1-1

Choosing aLocation ........... 1-1

Unpacking the Library .......... 1-1

Verifying the Shipment .......... 1-2

Installing the Library Foot Pads (for Desktop

Installation ONLY) ............ 1-2

Removing and Storing the Shipping Lock .... 1-3

Rackmounting the Library (for Rack Installation

ONLY) ................ 1-4

Connecting the Host Interface Cable ..... 1-10

Connecting aPower Cord ........ 1-12

Configuring Your Library ......... 1-13

Accessing the Configure Menu using the

Operator Control Panel ......... 1-13

Entering Network Settings using the Operator

Control Panel ............ 1-13

Logging on to the Web User Interface .... 1-14

Choosing the Number of Logical Libraries for

Your Library ............ 1-14

Choosing Library Settings ........ 1-15

Choosing Drive(s) Interface

Identification/Settings ......... 1-17

Entering User Access Information using the

Web User Interface .......... 1-18

Entering Date and Time using the Web User

Interface .............. 1-18

Entering Encryption Feature Activation Key 1-19

Entering Path Failover Feature Activation Key 1-19

Configuring Logs and Traces using the Web

User Interface ............ 1-20

Entering Event Notification Information using

the Web User Interface ......... 1-20

Preparing the Host .......... 1-21

Verifying the Connection ........ 1-21

Cartridge Magazines........... 1-22

Populating the Library with Data Cartridges 1-25

Inserting the Cleaning Cartridge ...... 1-26

iii

iv Getting Started with the Dell PowerVault TL2000 and TL4000 Tape Libraries

Safety and Environmental Notices

When using this product, observe the danger, caution, and attention notices that

are contained in this guide. The notices are accompanied by symbols that represent

the severity of the safety condition.

The sections that follow define each type of safety notice and give examples.

Danger Notice

Adanger notice calls attention to asituation that is

potentially lethal or extremely hazardous to people. A

lightning bolt symbol always accompanies adanger notice

to represent adangerous electrical condition.

Caution Notice

Acaution notice calls attention to asituation that is potentially hazardous to

people because of some existing condition. The following are examples of caution

notices.

Ahazardous electrical condition with less severity than

electrical danger.

Agenerally hazardous condition not represented by other

safety symbols.

Ahazardous condition due to the use of alaser in the

product. Laser symbols are always accompanied by the

classification of the laser as defined by the U. S. Department

of Health and Human Services (for example, Class I, Class

II, and so forth).

Ahazardous condition due to mechanical movement in or

around the product.

svc00168

32-55 kg (70.5-121.2 lbs)

Ahazardous condition due to the weight of the unit. Weight

symbols are accompanied by an approximation of the

product’s weight.

Laser Safety and Compliance

Before using the library, review the following laser safety information.

Class ILaser Product

The library may contain alaser assembly that complies with the performance

standards set by the U.S. Food and Drug Administration for aClass Ilaser

product. Class Ilaser products do not emit hazardous laser radiation. The library

has the necessary protective housing and scanning safeguards to ensure that laser

radiation is inaccessible during operation or is within Class Ilimits. External safety

agencies have reviewed the library and have obtained approvals to the latest

standards as they apply.

Rack Safety

The following general safety information should be used for all rack mounted

devices.

DANGER

Always lower the leveling pads on the rack cabinet.

vAlways install stabilizer brackets on the rack cabinet.

vTo avoid hazardous conditions due to uneven mechanical loading, always

install the heaviest devices in the bottom of the rack cabinet. Always install

servers and optional devices starting from the bottom of the rack cabinet.

vRack mounted devices are not to be used as ashelf or work space. Do not

place any object on top of rack mounted devices.

vEach rack cabinet might have more than one power cord. Ensure that all

power cords in the rack cabinet are disconnected before servicing any

device in the rack cabinet.

vConnect all devices installed in arack cabinet to power devices installed in

the same rack cabinet. Do not plug apower cord from adevice installed in

one rack cabinet into apower device installed in adifferent rack cabinet.

vAn electrical outlet that is not correctly wired could place hazardous

voltage on the metal parts of the system or the devices that attach to the

system. It is the responsibility of the customer to ensure that the outlet is

correctly wired and grounded to prevent an electrical shock.

vi Getting Started with the Dell PowerVault TL2000 and TL4000 Tape Libraries

CAUTION:

vDo not install aunit in arack where the internal rack ambient temperatures

will exceed the manufacturer’s recommended ambient temperature for all your

rack mounted devices.

vDo not install aunit in arack where the air flow is compromised. Ensure that

air flow is not blocked or reduced on any side of the unit.

vConsideration should be given to the connection of the equipment to the

supply circuit so that overloading of the circuits does not compromise the

supply wiring or overcurrent protection. To provide the correct power

connection to arack, refer to the rating labels located on the equipment in the

rack to determine the total power requirement of the supply circuit.

v(For sliding drawers) Do not pull out or install any drawer or feature if the rack

stabilizer brackets are not attached to the rack. Do not pull out more than one

drawer at atime. The rack may become unstable if you pull out more than

one drawer at atime.

v(For fixed drawers) This drawer is afixed drawer and should not be moved for

servicing unless specified by the manufacturer. Attempting to move the

drawer partially or completely out of the rack may cause the rack to become

unstable or cause the drawer to fall out of the rack.

Safety and Environmental Notices vii

CAUTION:

Removing components from the upper positions in the rack cabinet improves

rack stability during relocation. Follow these general guidelines whenever you

relocate apopulated rack cabinet within aroom or building:

vReduce the weight of the rack cabinet by removing equipment starting at the

top of the rack cabinet. When possible, restore the rack cabinet to the

configuration of the rack cabinet as you received it. If this configuration is not

known, you must do the following:

–Remove all devices in the 32U position and above.

–Ensure that the heaviest devices are installed in the bottom of the rack

cabinet.

–Ensure that there are no empty U-levels between devices installed in the

rack cabinet below the 32U level.

If the rack cabinet you are relocating is part of asuite of rack cabinets, detach

the rack cabinet from the suite.

vInspect the route that you plan to take to eliminate potential hazards.

vVerify that the route that you choose can support the weight of the loaded

rack cabinet. Refer to the documentation that comes with your rack cabinet for

the weight of aloaded rack cabinet.

vVerify that all door openings are at least 760 x230 mm (30 x80 in.).

vEnsure that all devices, shelves, drawers, doors, and cables are secure.

vEnsure that the four leveling pads are raised to their highest position.

vEnsure that there is no stabilizer bracket installed on the rack cabinet during

movement.

vDo not use aramp inclined at more than ten degrees.

vOnce the rack cabinet is in the new location, do the following:

–Lower the four leveling pads.

–Install stabilizer brackets on the rack cabinet.

–If you removed any devices from the rack cabinet, repopulate the rack

cabinet from the lowest position to the highest position.

If along distance relocation is required, restore the rack cabinet to the

configuration of the rack cabinet as you received it. Pack the rack cabinet in

the original packaging material, or equivalent. Also lower the leveling pads to

raise the casters off of the pallet and bolt the rack cabinet to the pallet.

viii Getting Started with the Dell PowerVault TL2000 and TL4000 Tape Libraries

Otros manuales para PowerVault TL4000

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Almacenamiento de Dell

Dell

Dell PowerVault 110T LTO3 Manual de usuario

Dell

Dell PowerVault 725N Manual de uso y cuidado

Dell

Dell PowerVault LTO4-EH1 Manual de usuario

Dell

Dell EMC CX4-120 Manual del propietario

Dell

Dell PowerVault 735N Guía

Dell

Dell PowerVault NX300 Manual de usuario

Dell

Dell PowerVault MD3200i Series Manual de usuario

Dell

Dell SD630-S Guía de referencia rápida

Dell

Dell FS7500 Manual de usuario

Dell

Dell PowerStore 500T Instrucciones de instalación y mantenimiento

Dell

Dell PowerVault Storage Area Network Manual de servicio

Dell

Dell PowerVault DR4100 Manual de usuario

Dell

Dell PowerVault DX6104 Manual de usuario

Dell

Dell PowerVault ML6000 Manual de usuario

Dell

Dell PowerVault 05CPW Manual de usuario

Dell

Dell PowerVault 650F Manual técnico

Dell

Dell PowerVault MD3800i Guía de referencia rápida

Dell

Dell PowerVault NX1950 Manual de funcionamiento

Dell

Dell PowerVault 200S Manual técnico

Dell

Dell PowerVault ML6000 Manual de usuario

Dell

Dell PowerVault 110T DLT4000 Manual de usuario

Dell

Dell PowerVault NX300 Manual de usuario

Dell

Dell PowerVault DL2100 Manual de usuario

Dell

Dell PowerEdge Express Flash NVMe PCIe SSD Manual de usuario

Manuales populares de Almacenamiento de otras marcas

QNAP

QNAP TS 32PXU Series Manual de usuario

LaCie

LaCie RUGGED RAID Manual de usuario

Freecom

Freecom CLS DOCK Manual de usuario

PNY

PNY Attache P-FD64MBATT3 Manual de usuario

HP StorageWorks MSL2024 Manual de usuario

OLT

OLT 6x6 Maximizer Manual de usuario

Transcend

Transcend JetFlash 160 Manual de usuario

LaCie

LaCie RUGGED MINI Manual de usuario

Thunderbolt

Thunderbolt 600 Manual de usuario

Panasonic

Panasonic LB-DH8 series Manual

Intel

Intel RAID High Availability Manual de usuario

LaCie

LaCie 12big Thunderbolt 3 Manual de usuario

Spectra Logic

Spectra Logic T-Series Spectra T50e Manual de usuario

Panasonic

Panasonic LKM-F931-1 Manual de usuario

Tabernus

Tabernus Enterprise Erase E2400 Manual de usuario

Rocstor

Rocstor COMMANDER 3F series Manual de usuario

HP P9000 Manual de usuario

Western Digital

Western Digital Ultrastar Data60 Manual de usuario