DaytonAudio Class-T Manual de usuario

Class-T

Digital Audio Amplifier

Module

Introduction:

The Class-T Digital Audio Amplifier is designed around the

Tripath TA-2024 IC. The TA2024 is a 15W/ch continuous

average two-channel Class-T Digital Audio Power Amplifier

IC using Tripath’s proprietary Digital Power Processing™

technology. Class-T amplifiers offer both the audio fidelity of

Class-AB amplifier and the power efficiency of a Class-D

amplifier.

This PCB amplifier is ideal for any audio enthusiast that

enjoys building and modifying speaker systems. The

applications are virtually limitless since this tiny PCB

measures a mere 2-11/16" x 1-5/16". Build you own

speakers or incorporate the amplifier into an existing

speaker cabinet. www.daytonaudio.com

Schematic Diagram:

The schematic diagram above is provided for reference. It illustrates the TA-2024

IC and the input and output circuits on the PCB. CDO are two output capacitors.

These capacitors are ideally placed close to the speaker terminals or crossover

input terminals as appropriate.

Warranty:

This Dayton Audio® product is warranted free from defects

in material and workmanship for one year from date of

purchase. Warranty does not apply to misuse, abuse,

neglect, accident, improper use, etc. Contact your Dayton

Audio reseller for a Return Merchandise Authorization.

www.daytonaudio.com

Assembly:

¾Remove the amplifier PCB from the static protective

sleeve using static protective gloves or wrist band

¾Solder the speaker wires to the PCB at points "A & B"

oThere are polarity marks (L+/- R+/-) printed on the bottom

of the PCB

¾Solder the power leads (if desired) at point "C"

oThere are polarity marks (B+/B-) printed on the bottom of

the PCB

¾Plug the LED ribbon cable into the white two-pin socket

at point "D" and mount the power indicator LED

oPolarity: the anode (+) lead is long, the cathode (-) is short

oClip the leads of the LED to the desired length

oPlug the black LED socket onto the LED leads;

anode to red wire and cathode to black wire

Refer to this diagram if for correct polarity

¾Wrap each speaker wire through a ferrite core; one wrap

per core is all that is required

¾Solder the speaker wires to the speaker terminals

¾Solder an output capacitor across the speaker terminals

in parallel with the speaker wires

¾Connect power via the power leads or DC power jack;

we recommend a 12VDC, 2000mA power supply similar

to Parts Express model 120-052

¾Mount the volume control in the desired location and

connect to the amplifier PCB using the 12" ribbon cable

¾Mount the PCB using adhesive pads or with a zip tie

www.daytonaudio.com

Features:

¾Class-T architecture

¾“Audiophile” Quality Sound

o0.03% THD+N @ 9W, 4Ω

o0.10% IHF-IM @ 1W, 4Ω

o11W @ 4Ω, 0.1% THD+N

o6W @ 8Ω, 0.1% THD+N

¾High Power

o15W @ 4Ω, 10% THD+N

o10W @ 8Ω, 10% THD+N

¾High Efficiency

o81% @ 15W, 4Ω

o90% @ 10W, 8Ω

¾Dynamic Range = 98 dB

¾Over-current protection

¾Over-temperature protection

Package Contents:

(1) Class T Digital Audio Amplifier PCB

(1) Volume control PCB with 12" ribbon cable

(1) LED power indicator with ribbon cable

(2) 12" Speaker Wires (Red & Black)

(2) 12" Power Wires (1 Red & 1 Black)

(2) 12" LED Wires (1 Red & 1 Black)

(2) Ferrite Cores

(2) Output Capacitors

Otros manuales de Amplificador de DaytonAudio

DaytonAudio

DaytonAudio SPA1000 Manual de usuario

DaytonAudio

DaytonAudio SBA302-BT Manual de usuario

DaytonAudio

DaytonAudio WF40A Manual de usuario

DaytonAudio

DaytonAudio DAX88 Manual de usuario

DaytonAudio

DaytonAudio DTA-2.1BT2 Manual de usuario

DaytonAudio

DaytonAudio SPA500 Manual de usuario

DaytonAudio

DaytonAudio MA1260 Manual de usuario

DaytonAudio

DaytonAudio KABX Manual de usuario

DaytonAudio

DaytonAudio APA1200DSP Manual de usuario

DaytonAudio

DaytonAudio DSPB Series Manual de usuario

DaytonAudio

DaytonAudio DTA-100LF Manual de usuario

DaytonAudio

DaytonAudio MCA3545 Manual de usuario

DaytonAudio

DaytonAudio DTA-100ST Manual de usuario

DaytonAudio

DaytonAudio HTA100 Manual de usuario

DaytonAudio

DaytonAudio SPA250 Manual de usuario

DaytonAudio

DaytonAudio DA10T Manual de usuario

DaytonAudio

DaytonAudio SA1000 Manual de usuario

DaytonAudio

DaytonAudio DTA30HP Manual de usuario

DaytonAudio

DaytonAudio DTA-PRO Manual de usuario

DaytonAudio

DaytonAudio WF60PA Manual de usuario

DaytonAudio

DaytonAudio DTA-120BT2 Manual de usuario

DaytonAudio

DaytonAudio DAX88 Manual de usuario

DaytonAudio

DaytonAudio KAB-2150 Manual de usuario

DaytonAudio

DaytonAudio APA102 Manual de usuario

Manuales populares de Amplificador de otras marcas

ASTRO

ASTRO HVO V40 P Manual de usuario

Marantz

Marantz SUPERSCOPE BLA-545 Instrucciones de montaje

NAD

NAD CI980 Manual de usuario

Technics

Technics SE-CH770 Manual de usuario

Harman Kardon

Harman Kardon HK6300 Manual de usuario

NAD

NAD T975 Manual de usuario

McIntosh

McIntosh MA6850 Manual de usuario

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Manual de usuario

Viatron

Viatron Autrix Manual de usuario

GME

GME GA9800 Manual de usuario

Atlas

Atlas CP700 Manual de usuario

Roland

Roland KC-1000 Manual de usuario

Pyle

Pyle PFMRA350BW Manual de usuario

Advantage

Advantage S-250 Manual de usuario

IRT Electronics

IRT Electronics DVA-3007 Manual de usuario

Dimavery

Dimavery BA-100 Series Manual de usuario

Sony

Sony XM-S400D Manual de usuario

Schertler

Schertler ROY X Manual de usuario