DAS.4 SL26 Manual de usuario

SL26 User Manual

Introducon

Combining low-power Bluetooth chip and

high-tech sensor technology, the smart watch

can monitor data related to sports and health

such as walking, running, cycling, basketball,

football, table tennis, heart rate, blood pres-

sure and sleep. Meanwhile, it can synchronize

informaon such as me, weather and mes-

sages. It is also equipped with funcons such

as mobile phone loss prevenon, sedentary

reminder, and alarm clock reminder.

How to Wear

1. Refer to the ﬁgure to correctly wear the

watch.

2. Buckle the watchband according to the

comfort level (make the heart rate light

should be close to your skin surface and avoid

looseness).

Funcon Operaons

ON/OFF

ON: long press the key on the side for about 2s,

and it will power on aer a vibraon

OFF: long press the key on the side for about 2s,

and it will power oﬀ aer a vibraon.

Connect the watch to your mobile phone:

download and install “FunDo” on the phone

(two available ways):

1. IOS and Android: scan the following QR code.

Aer you open the interface, click opons in

the upper right and use your mobile browser to

open and download.

2. Android: search “FunDo” in the Y PlayStore to

download; IOS: search “FunDo” in the APP Store

to download.

Aer it is downloaded, please allow all permissions

occurred during the installaon (the watch and mobile

phone require to connect to Bluetooth 3.0 and Blue-

tooth 4.0, ensuring that all funcons can be realized).

How to connect to Bluetooth 4.0: Aer suc-

cessfully downloading the app and installing it ,

you can ﬁnd a turn-on noﬁcaon prompt aer

opening “FunDo” and mobile Bluetooth, then

click “OK”. Click “More” on the boom right to

add devices, then search “TSO2-LE” and click to

connect (note: some Android phones need you

to open its GPS funcon, otherwise, it may fail to

search the watch Bluetooth name);

How to connect to Bluetooth 3.0: Open the

main menu of the watch – Bluetooth – search

Bluetooth – select to acvate Bluetooth – click

the mobile Bluetooth name you intend to

connect to – gain Bluetooth connecon prompt

– click “OK”(allow all mobile permissions) – click

Bluetooth 3.0 to connect.

How to check whether it is successful to connect:

When you drop down the watch menu: green

Bluetooth icon indicates that Bluetooth 4.0 is

successfully connected; blue indicates that Blue-

tooth 3.0 is successfully connected; blue (the

upper part) and green (the lower part) indicate

that both Bluetooth 3.0 and 4.0 are successfully

connected.

How to set message noﬁcaon: Enter your mo-

bile sengs – APP management – ﬁnd “FunDo” –

permission management – allow all permissions

– enter noﬁcaon management – ﬁnd “FunDo”

and allow all permissions.

Open “FunDo” – more – APP noﬁcaon –

open the background operaon permission –

enter and select “unlimited” – prompt to open

self-starng aer return – open self-starng

– return - select and open APP such as QQ and

WeChat that you want to synchronize informa-

on noﬁcaons to the watch.

Note: if you log in to your WeChat account on

the phone and computer at the same me,

the account on the phone won’t receive any

noﬁcaon. Some mobile phones require to add

“FunDo” in the power-saving white list, avoiding

being turned oﬀ when it is out of baery.

Fail to receive noﬁcaons: The watch only syn-

chronizes noﬁcaons from your mobile phone

such as call, message, QQ and WeChat. The watch

won’t receive any informaon if your mobile

phone fails to receive noﬁcaons. At this me,

open your mobile sengs – noﬁcaon funcon

– ﬁnd the corresponding APP – allow noﬁcaon.

Interface switch

Dial plate switch: Long press the dial plate

interface for 3s to switch dial plates. Slide the

screen le and right to switch the dial plate and

click OK to switch.

Drop down menu: Slide the dial plate interface

from the top to the boom and the interface

shows funcons such as do not disturb mode,

weather, brightness display, connecon and

sengs icon.

Measurement data interface: Slide the dial

plate from right to le to enter the interface that

checks measurement data, then you are able to

check today’s data such as walking, sleep, heart

rate and ECG.

Noﬁcaon: Slide the dial plate interface from

le to right to enter the interface that checks

noﬁcaons.

Aer the successful pairing with your mobile

phone, please open the switch of APP noﬁcaon

on the APP, then noﬁcaons received by your

mobile phone will be synchronized to the watch.

Main menu: Slide the dial plate interface from

the boom to the top to enter the main menu.

Enter each funcon and slide right to return.

Noce: somemes, unstable connecon

between mobile phone and watch Bluetooth

may occur due to the inconsistent Bluetooth

protocols of mobile brands. At this me, turn

oﬀ your mobile Bluetooth and try to connect

again (or restore the watch to factory sengs).

If system halted occurs, please long press ON/

OFF key for 10s to restart the watch.

Introducon to Main Funcons

Noﬁcaon: Enable to check instant messages

of APP such as QQ and WeChat (such funcon

requires to connect to your mobile “FunDo”).

Pedometer: Enable to check today’s walking

steps, calorie burned and walking distance. It

will automacally save all data of the day at

24:00 and it returns to 0. Users are enabled to

check all data of the day and historical data in

the APP, and change daily walking goal in the

step counng interface.

Sports Record: In the sports record interface, users

are enabled able to check all sports data saved in the

sports mode.

ECG Monitoring: Adopng opcal heart rate and

ECG, it takes about 30s to monitor data. Aer a

successful measurement, “ToApp” will appear

in the interface. Check ECG that is saved in the

mobile app“FunDo”.

Sports Mode Monitoring: Mulple sports

modes: running, hiking, biking, basketball, Ping-

Pong and football. Click “GO” aer you enter

any sports mode, and it starts to work aer 3s.

Click the interface to connue or stop exercises.

Sports data such as the total me and calorie

burned will be displayed in the interface aer

you click to stop exercises. Enable Able to delete

or save such sports data.

QR Code: Scan the QR code to download and

install via your mobile phone

Sleep Monitoring: Record your sleep length and

quality from 9pm to 9am, helping you adjust

your metable beer and improve sleep qual-

ity. Slide up and three opons are displayed:

status (turn on or turn oﬀ), history (check deep

sleep and light sleep length), and help (instruc-

ons in detail).

Bluetooth: Search devices you intend to con-

nect to, or disconnect the device that is in the

connected state.

Heart Rate Monitoring: Get the watch close

to the wrist (the best wearing posion: the

arm part above carpal bone), and measure the

real-me heart rate value (average person:

60-90 mes/second). Click the start icon at the

boom and “it is measuring” is displayed. It

takes about 20s to measure.

Telephone Directory: Synchronize 400 contacts

from the mobile phone;

Call Record: Synchronize call records from the

mobile phone;

Message: Synchronize messages from the mo-

bile phone (don’t support IOS mobile phones);

IP68 – Only dustproof

and only accidental con-

tact with fresh water –

hand washing.

Stopwatch: Open such funcon to me once or

mulple mes;

Alarm Clock: Self-deﬁned 5 alarm clocks: long

press to delete the alarm clock.

Dial: Connect to the mobile phone to dial (take

the call on the watch).

An-lost: Click to ﬁnd and the mobile phone

will sound the alarm; or enter the mobile APP

ﬁnd funcon and the watch will sound the

alarm.

www.das-4.com

Otros manuales para SL26

Tabla de contenidos

Manuales populares de Mirar de otras marcas

Pandora

Pandora WATCH2 Manual de usuario

Casio

Casio QW-4343 Manual de usuario

Suunto

Suunto X6 Manual de usuario

Seiko

Seiko N830 Manual de usuario

MotionX

MotionX 365 Manual de usuario

Garmin

Garmin VENU SQ 2 Manual de usuario

QCY

QCY Watch GTC Manual de usuario

Canyon

Canyon Cindy CNE-KW41WP Manual de usuario

Esq

Esq Watches Guía de instalación

Crane

Crane AA5-CDSM-3A Manual de usuario

Timex

Timex W-214 Manual de usuario

DETOMASO

DETOMASO MATERA Manual de usuario

Geemarc

Geemarc Watch N Shake Manual de usuario

LORUS

LORUS W590 Manual de usuario

STENLILLE

STENLILLE Actío Manual de usuario

Casio

Casio 5594 Manual de usuario

Sinn

Sinn HUNTER'S WATCH 3. Edition Manual de usuario

Slazenger

Slazenger SLZ800 Manual de usuario