DAS.4 SG18 Manual de usuario

SG18 User Manual

Operaon Guide:

Home buon: Long press the buon to power

ON/OFF, short press the buon to lighten the

screen.

Touch instrucons: Tap to enter and swipe

right to return; Slide down enter the status bar

under the home screen; slide right to enter the

Mulple sport mode; slide le to enter the main

menu; slide up to nocaon center.

Changeable band: A switch pin at the connecon

between watchcase and band, slide it to the

middle to take o/on the band.

Charging instrucon: this product is using

magnec force charging. Supports 5V mobile

phone charger and computer USB interface. Put

the charging cable to the back of the device’s

charging pins, it will charge automacally. It

usually takes 2 hours to fully charge and the de-

vice’s standby me up to 30 days, 5-10 days for

working. Do not use the watch when charging.

You should place the magnec charger cor-

rectly at the pins. If the charger is not properly

aligned with the pins, it will cause the circuit

to burn.

The watch can connect with your phone by

downloading the applicaon “Weart 2,0”

using one of the methods below:

1)Android / IOS : Scan the QR code using any

scanner, to download the app “Weart 2,0 Pro”.

2)Android Phone: search and download “Wear-

Fit 2.0” app from Google Play;

iOS phone: search and download “WearFit 2.0”

app from Apps Store;

Aer installaon, turn on cellphone Bluetooth

and “WearFit 2.0” App, conrm the nocaons

and all others permission “WearFit 2.0” asks are

enabled, Bind bracelet, nd “S20” device (Some

phone brands need turn on the GPS in the smart

phone before binding) and tap connect.

● Firmware upgrade: When Bluetooth is

connected, in “WearFit 2.0”, Tap Mine- “Device

management” - “Firmware update”, if there is

new rmware available, click to update to the

latest watch rmware version.

Noce: If it is unsuccessful to upgrade, please

wait for the watch to run out of baery. Charge

again and then reboot the watch again, search

Bluetooth device Huntersun-BLE connect and

upgrade again.

Due to Bluetooth versions being dierent in

dierent smartphones, should you face connec-

vity issues, restart the bluetooth service and

try to connect again.

Main Features:

● Language/Time/Date: These sengs will

be synchronized when you successfully con-

nect the watch with your smartphone.

● Standby watch face: You can change the

watch face by pressing on the screen for 2

seconds and then selecng the watch face

you want.

● Status bar: Slide down to enter the standby

interface with Bluetooth status, QR code

(scan with mobile phone and download

“WearFit 2.0”), brightness adjustment and

baery charge

● Nocaons: Slide right into the noca-

on, nocaons synchronous from phone,

such as calls, WhatsApp, SMS, WeChat

messages, recent 8 alerts can be shown,

when calls and messages are coming, the

watch will vibrate. remind, support decline a

call. You can also decline a call directly from

your watch.

● Pedometer, Distance,Calorie: Monitoring

daily steps, mileage, calories. Reset at 12

o’clock each day. Supports 7 days of records

data in the watch.

● Sports: Mulple sports-mode, select one

to start, slide right to pause the exercise. It

records duraon, calorie consumpon and

heart rate etc. data.

Heath care:

● Heart rate: When this funcon is acvated,

the heart rate is being measured by the

device scanning the surface capillary of the

skin with green opcal diodes. Please allow

for about 2 seconds to start measuring and

recording. Slide to other menus to stop mea-

suring. The average BPM depends on your

age, gender and physical condion. Please

refer to your doctor for further informaon

Please note: The device is not a medical de-

vice. Any values shown are for reference only.

● Blood pressure: please put your hands at

on a surface and do not move. When this

funcon is acvated it needs about 45 - 50

seconds of measuring to provide a result

Please note: The device is not a medical de-

vice. Any values shown are for reference only.

● ECG: The device combines an opcal heart

rate sensor and ECG sensor to show informaon

about the user’s heart funcon for reference.

When this funcon is acvated it needs about

30 seconds of measuring and reading to provide

a result.

Please note: The device is not a medical device.

Any values shown are for reference only.

● Blood Oxygen: Blood oxygen (SP02H) level is

the amount of oxygen circulang in the blood.

Please refer to informaon about healthy or

abnormal blood oxygen percentage for your age

group and gender online and/or ask your medical

praconer for advice.

Please note: The device is not a medical device.

Any values shown are for reference only.

● Sleep monitor: Sleep monitoring will be au-

tomacally acve from 10:00pm to 8:00am the

next morning. You can check the details of sleep

quality with the WearFit2.0 app in the phone.

● Stopwatch: Press the start and pause, again

press for stop.

● Remote control music: Play the music at

phone side, control at the watch side.

● Remote camera: Enter WearFit 2.0, tap + enter

the camera funcon, shake the watch to take a

photo.

● About: Tap to enter, check device model,

rmware version, Bluetooth address.

● Reset: Tap to reset all data (factory mode).

● Alarm: Set several alarm clocks through the

App in the phone.

● Sedentary Reminder: You can set me to

remind yourself stand up.

● Find your phone: Tap it and phone makes a

ringtone alert.

● Wrist bright screen: Set it in the App, it takes

more power consumpon when it is on.

● Units Setup: Metric or Imperial system.

● Data transmission: All the data will be saved

in the device. No maer pedometer, heart rate,

sleep quality, and mul-sport mode, all the data

can be transmied to the APP in the phone.

Warranty

we do not oer free warranty, as follows:

1). Disassemble or ret the product.

2). Caused by immodesty drop.

3). All arcial damage or misuse (such as:

make water into the host, the external force

shaer, scratch damage of peripheral compo-

nents, etc.), all these are beyond the scope of

the warranty.

3. When ask for free warranty, you must pro-

vide a warranty card with the seal of purchase

place and purchase date.

4. If you met problems during use, please

contact the shop customer service which you

bought from.

IP68 – Only dustproof

and only accidental con-

tact with fresh water –

hand washing.

www.das-4.com

Tabla de contenidos

Manuales populares de Mirar de otras marcas

Pandora

Pandora WATCH2 Manual de usuario

Casio

Casio QW-4343 Manual de usuario

Suunto

Suunto X6 Manual de usuario

Seiko

Seiko N830 Manual de usuario

MotionX

MotionX 365 Manual de usuario

Garmin

Garmin VENU SQ 2 Manual de usuario

QCY

QCY Watch GTC Manual de usuario

Canyon

Canyon Cindy CNE-KW41WP Manual de usuario

Esq

Esq Watches Guía de instalación

Crane

Crane AA5-CDSM-3A Manual de usuario

Timex

Timex W-214 Manual de usuario

DETOMASO

DETOMASO MATERA Manual de usuario

Geemarc

Geemarc Watch N Shake Manual de usuario

LORUS

LORUS W590 Manual de usuario

STENLILLE

STENLILLE Actío Manual de usuario

Casio

Casio 5594 Manual de usuario

Sinn

Sinn HUNTER'S WATCH 3. Edition Manual de usuario

Slazenger

Slazenger SLZ800 Manual de usuario