DAS.4 SG40 Manual de usuario
SG40
1. On/O key
2. Display
3. Watch strap
USER MANUAL
Charging Method
1.Before using the watch for the rst me,
charge it for 2 hours and ensure it is fully
charged.
2.Charging with a Magnec Charging Cable:
Charge the product with a magnec charging
cable in the direcon shown in the gure
below.
Installing the APP
According to the operang
system of your mobile phone,
scan the corresponding QR
code or enter “app store” or
Android app market to down-
load “GloryFit” and install it.
System Requirements: Android 4.4 or above;
IOS8.0 or above. Supporng Bluetooth 4.0 or
above.
Binding the Watch
1.Turn on the Bluetooth of your mobile phone.
2.Turn on the APP – click “Add Device” – Search
– click the corresponding Bluetooth name
searched — the watch is successfully bound
Operang Instrucons
Denions of Keys
On/O Key: On any screen, press it for 3 seconds
and the Shut Down Conrmaon screen will pop
up. Press it shortly to return to the main screen.
Operaon: Swipe the screen to the le or right
to switch between screens. If the current screen
has sub-screens, click an icon to enter the cor-
responding sub-screen. Swipe the screen to the
right to return to the previous menu.
Synchronizing Informaon
Aer the watch is successfully bound with your
mobile phone, the watch will adjust the me
automacally and at the same me immediately
synchronize and record your sports informaon
and health status.
Main Funcons
Clock, Step Count, Distance, Calorie, Sleep
Monitoring, 24-hour Heart Rate Monitoring,
Call Reminder, Alarm Clock, Excessive Sing
Reminder, Nocaon, etc.
Mulple Languages
Languages in the Watch: 11 languages, i.e.
Chinese, English, Japanese, German, Italian,
French, Spanish, etc.
Languages in the APP: Russian, Indonesian,
German, Italian, Czech, Japanese, French,
Simplied Chinese, Tradional Chinese, English,
Portuguese, Spanish, Arabic, Korean.
Power o and Reset
Press the side key for 3 seconds to turn on the
watch and enter the main screen. Swipe the
screen upwards to enter the Sengs screen.
Click “Sengs” to enter the Sengs List. Select
Power o or Reset.
Switch between Screens
There are a total of 3 screens. Press for 3 sec-
onds to enter the main screen. Swipe the screen
to the right and select a new screen. Return to
the main menu and switch between screens.
Step Count
The number of steps, distance and calories are
recorded. The data are cleared at midnight and
will be recounted on the new day. At the same
me, the historical data are saved and uploaded
to the APP.
Heart Rate Monitoring
Enter Heart Rate Monitoring and the light will
keep ashing. 10 seconds later, the monitoring
data will appear and be synchronized in the APP.
Swipe the screen and the monitoring will stop.
You can set 24-hour connuous monitoring in
the APP.
Sleep Monitoring
The sleep state of last night is recorded. Your
sleep is monitored only when you wear the
watch. The me can be set to 8:00 p.m. to 12:00
noon the next day.
Sports Mode
There are a total of 6 modes for selecon.
Press the sport you want to enter its funcon.
Your sports data are recorded in detail (heart
rate, calories etc).
Sengs
Find Mobile: Click “Find”.
If your mobile phone is
connected to the watch, your
mobile phone will vibrate.
Brightness Control: The watch has 4 bright-
ness levels. Click “Brightness” to increase the
brightness level. The default brightness level
of the watch is level 2.
Product Informaon: Bluetooth name, Blue-
tooth address and version number.
Nocaon
It is turned on in an the APP. There are 21 APPs
for selecon, such as WeChat, QQ, Facebook,
WhatsApp, Twier, Line, etc. Only when the
watch keeps is connected to your mobile phone
and Nocaon is turned on will the watch
receive nocaons.
Call Reminder: It is turned on
in the APP. You can set “Delay
Reminder” and “Reject Call”. The
contact person or phone number
of the caller is displayed when a
call is coming.
Excessive Sing Reminder: It
is turned on in the APP. You can
set the start me, end me and
interval of reminder.
Alarm Clock: It is turned on in the
APP. When the me set arrives, the
watch will vibrate to remind you.
Raise Wrist to Light up Screen: It is turned on in
the APP. Only aer it is turned on will the screen
be lit up when you raise your wrist.
Do Not Disturb Mode: It is turned on in the APP.
You can set the start me and end me. Aer
the mode is turned on, the watch will turn o
“Vibraon”, turn o “Raise Wrist to Light up
Screen” and turn o “Nocaon”.
Shake to Take Pictures: It is turned on in the APP.
When you raise your wrist with the watch, your
mobile phone will take a picture aer countdown
from 3 to 1.
Find Watch: It is turned on in the APP. The watch
will vibrate.
SMS Reminder: It is turned on in the APP. When
your mobile phone receives an SMS, the watch
will remind you synchronously.
Duraon of Bright Screen: It is turned on in the
APP. You can set the Duraon of Bright Screen to
5s, 10s or 15s.
Time System: It is set in the APP. You can set
12-hour me system or 24-hour me system.
Device Language: It is set in the APP. There are
18 languages for selecon.
Basic Parameters
Master Chip: Realtek8762C
Baery Capacity: 160mAh (polymer)
Display: 1.28” TFT Display
Working Time: 5-7 days
Resoluon Rao: 240*240dpi
Synchronizaon Method: Bluetooth 4.0 Product
Weight: 48g Working Temperature: 10℃~50℃
Product Size: Diameter 44.5*9.8mm Packing
List: Main machine, magnec charging cable,
and User’s Guide Material of Wrist Strap: TPU
Compability: IOS 8.0 + Android 4.4
FAQs
1.Why the watch cannot be searched or con-
nected at the me of binding?
a.Please check that your mobile phone’s
Bluetooth has been turned on and ensure that
the distance between the watch and your mobile
phone is within 0.5 5m.
b.Please check whether electricity exists in the
watch. If, aer the watch is charged for 2 hours,
the problem cannot be solved, please contact us.
2.Why the Bluetooth cannot be connected
occasionally?
The Bluetooth service of some mobile phones
becomes abnormal occasionally at the me of
restart. Usually the Bluetooth can be connected
normally aer your mobile phone is restarted.
3.Why an Android mobile phone is disconnected
easily?
The system memory management of an Android
mobile phone turns o the APP on the backstage
forcibly. You need to turn o the power saving
mode or drag the APP to the green backstage of
the FPT System Manager, then the APP will not
be turned o forcibly. When the APP is running
on the backstage, the Bluetooth will not be
disconnected automacally.
Tabla de contenidos
Otros manuales de Mirar de DAS.4
DAS.4
DAS.4 SL20 Manual de usuario
DAS.4
DAS.4 ST30 Manual de usuario
DAS.4
DAS.4 SG20 Manual de usuario
DAS.4
DAS.4 SG35 Manual de usuario
DAS.4
DAS.4 SP40 Manual de usuario
DAS.4
DAS.4 SG53 Manual de usuario
DAS.4
DAS.4 SQ12 Manual de usuario
DAS.4
DAS.4 SP01 Manual de usuario
DAS.4
DAS.4 SG44 Manual de usuario
DAS.4
DAS.4 SP20 Manual de usuario
DAS.4
DAS.4 SL13 Manual de usuario
DAS.4
DAS.4 SG24 Manual de usuario
DAS.4
DAS.4 SL22 Manual de usuario
DAS.4
DAS.4 SG50 Manual de usuario
DAS.4
DAS.4 SG30 Manual de usuario
DAS.4
DAS.4 ST08 Manual de usuario
DAS.4
DAS.4 SL26 Manual de usuario
DAS.4
DAS.4 SU10 Manual de usuario
DAS.4
DAS.4 SL26 Manual de usuario
DAS.4
DAS.4 SG43 Manual de usuario
