Danfoss JS1 series Manual de usuario
Electrical Installation
Joysticks
JS1 Heavy Duty
powersolutions.danfoss.com
Revision history Table of revisions
Date Changed Rev
December 2016 Added PVE information 0201
February 2016 First edition 0101
Electrical Installation
JS1 Heavy Duty Joysticks
2 | ©Danfoss | December 2016 BC00000346en-US | 0201
Literature references Technical literature.......................................................................................................................................................................... 4
Product overview Description..........................................................................................................................................................................................5
Electrical—PVE (Standard and Extended)............................................................................................................................... 5
Electrical—PVE (Extended only)..................................................................................................................................................6
Electrical—CAN.................................................................................................................................................................................6
Electrical installation Connector options and cabling...................................................................................................................................................7
One 6 pin connector.................................................................................................................................................................. 7
Two 6 pin connectors................................................................................................................................................................ 7
One 12 pin connector................................................................................................................................................................8
Two 12 pin connectors..............................................................................................................................................................9
Two 12 pin and one 6 pin connectors...............................................................................................................................10
One 25 and One 6 D-Sub pin connectors........................................................................................................................ 11
Mating connectors bag assemblies................................................................................................................................... 12
Cable assemblies.......................................................................................................................................................................13
Electrical Installation
JS1 Heavy Duty Joysticks
Contents
©Danfoss | December 2016 BC00000346en-US | 0201 | 3
Technical literature
Title Description Literature number
JS1 Heavy Duty Joysticks Technical Information Complete product electrical and
mechanical specifications BC00000347
JS1 J1939 Function Block User Manual Compliant function blocks set-up
information AQ00000202
JS1 CANopen Function Block User Manual AQ00000203
Comprehensive technical literature online at powersolutions.danfoss.com
Electrical Installation
JS1 Heavy Duty Joysticks
Literature references
4 | ©Danfoss | December 2016 BC00000346en-US | 0201
Description
JS1 Heavy Duty Joysticks
The Danfoss platform offers a wide variety of new grip designs and were developed after extensive
research detailing operator needs. The JS1 heavy duty joysticks (JS1-H) and compatible grips meet the
demanding conditions typically found in mobile equipment environments. The available grips features
provide a high degree of protection from chemicals, shock, vibration and EMC exposure. Danfoss
joysticks are appropriate for both in-cabin and out of cabin applications and feature ergonomic forms
that minimize machine operator fatigue. The JS1-H ergonomic left-hand, right-hand and ambidextrous
(ST2) grip design options enable efficient operation and comfortable human-machine interface with easy
to use fingertip controls for maximum productivity. The grips feature a modular design that allows switch
and proportional rollers locations flexibility.
Electrical—PVE (Standard and Extended)
Electrical—PVE (Standard and Extended) characteristics
Supply voltages UDC 9 to 36 Vdc
Current consumption 150 mA
Sensor type Hall effect with redundant
sensors
Potentiometer
Signal voltage USMinimum to maximum 0.25 to 0.75
Neutral position 0.50
Signal load in neutral
position Load type PVE Other
Load impedance >6 kΩ >15 kΩ
Signal current at
maximum movement UDC = 12 V 6 kΩ 15 kΩ
± 0.6 mA 0.2 to 0.6 mA
UDC= 24 V ± 1.2 mA 0.4 to 1.2 mA
Signal current in neutral
position UDC = 12 V ± 0 mA ± 0.4 mA
UDC= 24 V ± 0 mA ± 0.8 mA
Inverter Non inverted Output signal = Us
Inverted Output signal = -1 x (Us-0.5
x U+) + 0.5x U+
Maximum load for push buttons and directional switches for all proportional
functions 0.6 A
Neutral position switch 3 A
Electrical Installation
JS1 Heavy Duty Joysticks
Product overview
©Danfoss | December 2016 BC00000346en-US | 0201 | 5
Electrical—PVE (Extended only)
Electrical—PVE (Extended only) characteristics
Signal regulation UsUsMinimum (50%) 0.37 to 0.63
at 100% movement
U+Maximum (200%) 0.25 to 0.75
at 50% movement
Dead band compensation UsMinimum 0.00
U+Maximum 0.06
Electrical—CAN
Electrical—CAN characteristics
Sensor type Hall effect with redundant sensors
Potentiometer
Resolution 12 bit
Supply voltage (Vs)9 to 36 Vdc
Output J1939 and CANopen protocols
Base maximum current consumption 120 mA at 9V
Base maximum survival supply voltage 68 Vdc
Electrical Installation
JS1 Heavy Duty Joysticks
Product overview
6 | ©Danfoss | December 2016 BC00000346en-US | 0201
Connector options and cabling
Order separately from joystick.
One 6 pin connector
Cabling and pin location: One 6 pin DEUTSCH DTM04 connector
6
1
4
3
kwa1442328497987
One 6 pin pinout
Wire color DEUTSCH DTM04 6 pin Function
White 1 Ground
Brown 2 Power
Green 3 CAN high
Yellow 4 CAN low
Grey 5 CAN shield
NC 6 NC
Two 6 pin connectors
Cabling and pin location: Two 6 pin DEUTSCH DTM04 connectors
kwa1442328596963
6
1
4
3
6
1
4
3
Two 6 pin pinout
Wire color DEUTSCH DTM04 6 pin DEUTSCH DTM04 6 pin Function
White 1 Ground
Brown 2 Power
Green 3 CAN high
Yellow 4 CAN low
Grey 5 CAN shield
NC 6 NC
Pink 1 Ground
Blue 2 Power
Red 3 CAN high
Black 4 CAN low
Electrical Installation
JS1 Heavy Duty Joysticks
Electrical installation
©Danfoss | December 2016 BC00000346en-US | 0201 | 7
Two 6 pin pinout (continued)
Wire color DEUTSCH DTM04 6 pin DEUTSCH DTM04 6 pin Function
Violet 5 CAN shield
NC 6 NC
One 12 pin connector
Cabling and pin location: One 12 pin DEUTSCH DTM04 connector; Code number: 10102025-B (16 to 20 AWG)
12
1
7
6
kwa1454869286305
PVRE, 12 pin pinout
Wire color DEUTSCH DTM04 12 pin Function
White 1 Ground
Brown 2 Power
Yellow-Grey 3 CAN high
Pink-Green 4 CAN low
Grey 5 CAN shield
Violet 6 Proportional 1
Grey-Pink 7 Proportional 2
Red-Blue 8 Proportional 3
White-Red 9 Push 7
Brown-Red 10 Push 8
Green 11 PVE power (neutral switch)
Whte-Yellow 12 PVE power feedback
Electrical Installation
JS1 Heavy Duty Joysticks
Electrical installation
8 | ©Danfoss | December 2016 BC00000346en-US | 0201
Two 12 pin connectors
Cabling and pin location: Two 12 pin DEUTSCH DTM04 connectors; Code number: 10102023-K (16 to 20 AWG)
12
1
7
6
12
1
7
6
kwa1454870808461
Standard, 12 pin A pinout
Wire color DEUTSCH DTM04 12 PIN Function
White 1 Ground
Brown 2 Power
Yellow-Grey 3 CAN high
Pink-Green 4 CAN low
Grey 5 CAN shield
Violet 6 Proportional 1
Grey-Pink 7 Proportional 2
Red-Blue 8 Proportional 3
White-Red 9 Push 7
Brown-Red 10 Push 8
Green 11 PVE power (neutral switch)
Whte-Yellow 12 PVE power feedback
Standard, 12 pin B pinout
Wire color DEUTSCH DTM04 12 PIN Function
White 1 Direction 1a
Brown 2 Direction 1b
Yellow-Grey 3 Direction 2a
Pink-Green 4 Direction 2b
Grey 5 Direction 3a
Violet 6 Direction 3b
Grey-Pink 7 Proportional 4
Red-Blue 8 Direction 4a
White-Red 9 Direction 4b
Brown-Red 10 Proportional 5
Green 11 Direction 5a
Whte-Yellow 12 Direction 5b
Electrical Installation
JS1 Heavy Duty Joysticks
Electrical installation
©Danfoss | December 2016 BC00000346en-US | 0201 | 9
Two 12 pin and one 6 pin connectors
Cabling and pin location: Two 12 pin and one 6 pin DEUTSCH DTM04 connectors; Code number: 11176538-K
12
1
7
6
12
1
7
6
6
1
4
3
kwa1454871825360
Extended, 12 pin A pinout
Wire color DEUTSCH DTM04 12 PIN Function
White 1 Ground
Brown 2 Power
Yellow-Grey 3 CAN high
Pink-Green 4 CAN low
Grey 5 CAN shield
Violet 6 Proportional 1
Grey-Pink 7 Proportional 2
Red-Blue 8 Proportional 3
White-Red 9 Push 7
Brown-Red 10 Push 8
Green 11 PVE power (neutral switch)
Whte-Yellow 12 PVE power feedback
Extended, 12 pin B pinout
Wire color DEUTSCH DTM04 12 PIN Function
White 1 Direction 1a
Brown 2 Direction 1b
Yellow-Grey 3 Direction 2a
Pink-Green 4 Direction 2b
Grey 5 Direction 3a
Violet 6 Direction 3b
Grey-Pink 7 Proportional 4
Red-Blue 8 Direction 4a
White-Red 9 Direction 4b
Brown-Red 10 Proportional 5
Green 11 Direction 5a
Whte-Yellow 12 Direction 5b
Electrical Installation
JS1 Heavy Duty Joysticks
Electrical installation
10 | ©Danfoss | December 2016 BC00000346en-US | 0201
Este manual sirve para los siguientes modelos
5
Tabla de contenidos
Otros manuales de Controladores de videojuegos de Danfoss
Danfoss
Danfoss JS2000 Series Manual
Danfoss
Danfoss JS7000 Manual de usuario
Danfoss
Danfoss JS2000 Series Manual de usuario
Danfoss
Danfoss JS6000 Manual de usuario
Danfoss
Danfoss JS120 Manual
Danfoss
Danfoss PVREL Manual de usuario
Danfoss
Danfoss Prof1 PVRE Manual de usuario
Danfoss
Danfoss Prof 1 Manual de usuario
Danfoss
Danfoss JS6000 Manual
Danfoss
Danfoss JS1-H Serviceability Manual de usuario
