Dallmeier PANOMERA S4 Guía

Panomera® Maintenance

Important information for inspection and maintenance of Panomera® S4 and S8 systems

Like any other item of daily use, the components of a video security system are subject to natural wear and tear due to environmental

influences. Regular inspection and maintenance of Panomera® systems is therefore required to ensure error-free operation and to avoid

consequential damage. We recommend carrying out the inspection and maintenance as prescribed at least once a year during the

entire operating period.

The operator or owner of a video security system has a legally anchored duty to maintain the safety of the equipment.

This obligation includes in particular the inspection and maintenance and Panomera® systems.

If damage results from neglect of this obligation, the system operator or owner is liable.

The maintenance interval always depends on the prevailing environmental conditions and the current

conditions (storm, hail, etc.). The maintenance interval has to be determined individually on the basis of a risk analysis.

The standards and guidelines to be observed by the operator or owner of a video security system must

always be defined individually.

Strength Test

The Panomera® System system and all attached parts must be checked for mechanical strength. This serves to prevent personal injury

and damage to property caused by falling parts.

■The inspection must to be carried out at least once a year.

■The inspection must be carried out by qualified personnel.

■The inspection must be suiciently and comprehensibly documented.

■The inspection must include at least visible damage and wear, functionality, operational safety and legibility of markings.

Please note that the operator of a video system is liable for personal injury and property damage caused by falling parts.

This simplified example shows the wall mounting of a Panomera®. Check alternative mounting methods (ceiling or pole mounting) accordingly.

If necessary, observe other attached parts and check in particular:

❶the mounting of the Panomera® on the bracket.

❷the mounting of the bracket on the wall.

❸the sealing of the front glass.

❹the fastening of the earthing cable.

❺ the correct positioning of the connectors for power supply and network connection.

❻the attachment of the safety cable to the Panomera® and to the anchor point.

Defective parts must be replaced immediately.

Dallmeier electronic GmbH & Co.KG | Bahnhofstr. 16, 93047 Regensburg, Germany | +49 941 8700-0 | dallmeier.com

All trademarks identified by ® are registered trademarks of Dallmeier electronic GmbH & Co.KG.

Third-party trademarks are named for information purposes only. Dallmeier electronic respects the intellectual property of third parties and always attempts to ensure the complete identification of third-party

trademarks and indication of the respective holder of rights. In case that protected rights are not indicated separately, this circumstance is no reason to assume that the respective trademark is unprotected.

Specifications subject to change without notice. Errors and misprints excepted. Pictures may dier from the actual product.

Panomera® Maintenance

Important information for inspection and maintenance of Panomera® S4 and S8 systems

Housing Cleaning

Regular cleaning of the Panomera® housing is necessary for error-free operation. Contamination of the front glass, for example, could lead

to poor image quality. On the other hand, heavy soiling of the cooling fins could endanger heat exchange and thus fault-free long-term

operation.

Please note that regular cleaning of the housing is not only necessary for optical reasons.

First remove all foreign objects (cobwebs, leaves, etc.) from the housing, especially:

❶from the front glass.

❷between the cooling fins on the back.

❸between the ventilation holes at the back.

❹ Clean the surface of the housing soft, dry and antistatic cloth.

Do not use cleaning agents to avoid damaging the surface.

❺ Clean the front glass of the Panomera® with a silicone-free cotton cloth.

Do not use a household glass cleaner, but a special cleaner recommended by Dallmeier (Flux glass cleaner).

Avoid strong rubbing and do not allow residues of the cleaning agent to dry on the front glass.

Front Glass Check

After cleaning the housing, the front glass of the Panomera® should be checked. In addition to observing any scratches, the seal of the front

glass in particular should be checked thoroughly. Depending on the prevailing environmental conditions, the seal may be damaged by cracks

or shrinkage. As a result, penetrating moisture can lead to fogging of the glass from the inside and, in extreme cases, to damage to the optics

and electronics.

Note that a front glass with a damaged seal must be replaced immediately to avoid consequential damage.

Otros manuales para PANOMERA S4

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cámara de seguridad de dallmeier

dallmeier

dallmeier DF5 Series Manual de instalación y operación

dallmeier

dallmeier DDZ3022A Instrucciones de funcionamiento y mantenimiento

dallmeier

dallmeier DDZ5200HD Series Guía

dallmeier

dallmeier DDF4320HD-DN Manual de usuario

dallmeier

dallmeier DF4920HD-DN Guía

dallmeier

dallmeier DDF4010HDV Instrucciones de funcionamiento y mantenimiento

dallmeier

dallmeier DF3000IP Instrucciones de funcionamiento y mantenimiento

dallmeier

dallmeier DDF51 0HDV-DN Series Guía

dallmeier

dallmeier DOMERA DDZ4010 HS/HD Series Instrucciones de funcionamiento y mantenimiento

dallmeier

dallmeier RDF6000DN Series Manual de usuario

dallmeier

dallmeier SDF5450HD-DN Manual de usuario

dallmeier

dallmeier DDF4010HDV-SM Manual de usuario

dallmeier

dallmeier DF3000A-DN Instrucciones de funcionamiento y mantenimiento

dallmeier

dallmeier Domera DDZ3018-IM/HS Instrucciones de funcionamiento y mantenimiento

dallmeier

dallmeier DDF4520HDV-DN Guía

dallmeier

dallmeier MDF5250HD-DN Manual de usuario

dallmeier

dallmeier DF4910HD-DN Instrucciones de funcionamiento y mantenimiento

dallmeier

dallmeier MDF4220HD Guía

dallmeier

dallmeier DDF4920HDV-DN-IM Guía

dallmeier

dallmeier DF5200HD-IR-ANPR Guía

dallmeier

dallmeier DDF5 00HDV-DN-IM Series Guía

dallmeier

dallmeier Colour Picodome DDF3000APV Instrucciones de funcionamiento y mantenimiento

dallmeier

dallmeier HD-FixDome Manual de usuario

dallmeier

dallmeier MDF5400HD-DN Manual de usuario

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Vicon

Vicon V662-D-1 Instrucciones de funcionamiento

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario

dallmeier PANOMERA S4 Guía

Manuales populares de Cámara de seguridad de otras marcas