D-Link DSL-2750U Manual de usuario
Quick Installation Guide
DSL-2750U
Wireless ADSL2+ Router with
3G/LTE/Ethernet WAN Su ort
and USB Port
DSL-2750U Quick Installation Guide
BEFORE YOU BEGI
Delivery Package
•Router DSL-2750U
•Power adapter DC 12V/1A
•RJ-11 telephone ca le
•Ethernet ca le (CAT 5E)
•Splitter
•“Quick Installation Guide” ( rochure).
If any of the items are missing, please contact your reseller.
The “User Manual” and “Quick Installation Guide” documents are availa le
on D-Link we site (see www.dlink.ru).
!Using a power supply with a different voltage rating than the one
included will cause damage and void the warranty for this product.
Default Settings
IP address of wireless router 192.168.1.1
Username (login) admin
Password admin
ame of wireless network (SSID) DSL-2750U
etwork key (PSK)
see WPS PIN on the
arcode la el on the
ottom panel of the
device
2
DSL-2750U Quick Installation Guide
System Requirements and Equipment
•A computer with any operating system that supports a we rowser.
•A we rowser to access the we - ased interface of the router:
◦Apple Safari 5 and later
◦Google Chrome 5 and later
◦Microsoft Internet Explorer 8 and later
◦Mozilla Firefox 5 and later
◦Opera 10 and later.
•A NIC (Ethernet or Wi-Fi adapter) to connect to the router.
•An 802.11 , g, or n Wi-Fi adapter to create a wireless network.
•A USB modem to connect to the Internet1.
!
Your USB modem should e equipped with an active identification
card (SIM or R-UIM) of your operator.
Some operators require su scri ers to activate their USB modems prior
to using them. Please, refer to connection guidelines provided y your
operator when concluding the agreement or placed on its we site.
For LTE and CDMA USB modems, it is required to disa le the PIN
code check on the identification card prior to connecting the USB
modem to the router.
1 Contact your operator to get information on the service coverage and fees.
3
DSL-2750U Quick Installation Guide
Supported USB Modems
GSM modems
•Alcatel X500
•D-Link DWM-152C1
•D-Link DWM-156A6
•D-Link DWM-156A7
•D-Link DWM-156C1
•D-Link DWM-157B1
•D-Link DWM-157B1 (Velcom)
•D-Link DWM-158D1
•Huawei E150
•Huawei E1550
•Huawei E156G
•Huawei E160G
•Huawei E169G
•Huawei E171
•Huawei E173 (Megafon)
•Huawei E220
•Huawei E352 (Megafon)
•Huawei E367 (3G mode)
•Huawei E392 (3G mode)
•ZTE MF112
•ZTE MF192
•ZTE MF626
•ZTE MF627
•ZTE MF652
•ZTE MF667
•ZTE MF668
•ZTE MF752
4
DSL-2750U Quick Installation Guide
CDMA modems2
•Airplus MCD-650
•Airplus MCD-800
•AnyDATA ADU-300A
•AnyDATA ADU-500A
•AnyDATA ADU-510A
•Huawei EC306
•ZTE AC5710
•ZTE AC5730
L E modems
•Huawei E3131
•Huawei E3272
•Huawei E367
•Huawei E392
•Megafon M100-1
•Megafon M100-3
•Megafon M100-4
•Megafon M150-1
•MTS 824F
•Yota LU-150
•Yota WLTUBA-107
•ZTE MF823
•ZTE MF827
!The manufacturer does not guarantee proper operation of the router
with every modification of the firmware of USB modems.
2 Performance of CDMA USB modems is not tested for the current firmware version.
5
DSL-2750U Quick Installation Guide
CO ECTI G TO PC
PC wit Et ernet Adapter
1. Make sure that your PC is powered off.
2. Connect an Ethernet ca le etween any of four Ethernet ports located on
the ack panel of the router and the Ethernet port of your PC.
3. To connect via USB modem: connect your USB modem to the USB port3
located on the left side panel of the router.
!If you need to connect or change a USB modem to another one when
the router is powered on, power off the router, connect the modem to
the USB port, and power on the router.
4. To connect the router to a DSL line: connect a phone ca le etween the
DSL port of the router and the ADSL OU port of the splitter. Connect
your phone to the PHONE port of the splitter. Then connect another
phone ca le etween a phone jack and the ADSL IN port of the splitter.
5. To connect the router to an Ethernet line: in the we - ased interface of
the router, select the router's LAN port that will e used as the WAN port
and create an Ethernet WAN connection. Then connect the Ethernet ca le
etween the selected Ethernet port located on the ack panel of the router
and the Ethernet line.
6. Connect the power cord to the power connector port on the ack panel of
the router, then plug the power adapter into an electrical outlet or power
strip.
7. Turn on the router y pressing the ON/OFF utton on its ack panel.
8. Turn on your PC and wait until your operating system is completely
loaded.
Now you should configure your PC to o tain an IP address automatically (as
DHCP client).
3 It is recommended to use a USB extension ca le to connect a USB modem to the
router.
6
DSL-2750U Quick Installation Guide
Obtaining IP Address Automatically
in OS Windows XP
1. Click the Start utton and proceed to the Control Panel > etwork
and Internet Connections > etwork Connections window.
2. In the etwork Connections window, right-click the relevant Local
Area Connection icon and select the Properties line in the menu
displayed.
3. In the Local Area Connection Properties window, on the General
ta , select the Internet Protocol (TCP/IP) line. Click the Properties
utton.
7
DSL-2750U Quick Installation Guide
4. Select the Obtain an IP address automatically and Obtain D S
server address automatically radio uttons. Click the OK utton.
5. Click the ОК utton in the connection properties window.
Now your computer is configured to o tain an IP address automatically.
8
DSL-2750U Quick Installation Guide
Obtaining IP Address Automatically
in OS Windows 7
1. Click the Start utton and proceed to the Control Panel window.
2. Select the etwork and Sharing Center section. (If the Control Panel
has the category view (the Category value is selected from the View by
drop-down list in the top right corner of the window), choose the View
network status and tasks line under the etwork and Internet
section.)
3. In the menu located on the left part of the window, select the Change
adapter settings line.
4. In the opened window, right-click the relevant Local Area Connection
icon and select the Properties line in the menu displayed.
5. In the Local Area Connection Properties window, on the
etworking ta , select the Internet Protocol Version 4 (TCP/IPv4)
line. Click the Properties utton.
9
DSL-2750U Quick Installation Guide
6. Select the Obtain an IP address automatically and Obtain D S
server address automatically radio uttons. Click the OK utton.
7. Click the OK utton in the connection properties window.
Now your computer is configured to o tain an IP address automatically.
10
Otros manuales para DSL-2750U
24
Tabla de contenidos
Otros manuales de Enrutador de red de D-Link
D-Link
D-Link DSL-2640U Manual de usuario
D-Link
D-Link DSL-X1852E Manual de usuario
D-Link
D-Link DSL-2730B Instrucciones de instalación
D-Link
D-Link DSL-504T Manual de usuario
D-Link
D-Link R15 Manual
D-Link
D-Link DSL-502T Manual de usuario
D-Link
D-Link DIR-651 Manual de usuario
D-Link
D-Link DIR-2640 Manual de usuario
D-Link
D-Link DSL-2650U Manual de usuario
D-Link
D-Link DES-1016D - Switch Manual de usuario
D-Link
D-Link DSR-250 Manual de usuario
D-Link
D-Link DSL-514 Manual de usuario
D-Link
D-Link DIR-X1530 Manual de usuario
D-Link
D-Link DIR-2150 Manual de usuario
D-Link
D-Link DIR-X5460 Manual de usuario
D-Link
D-Link DGS-1510 Series Manual
D-Link
D-Link AirPlus DWL-G730AP Manual de usuario
D-Link
D-Link DSL-3782 Manual de usuario
D-Link
D-Link Xtreme N DIR-614 Manual de usuario
D-Link
D-Link DSL-1500G Manual de usuario
Manuales populares de Enrutador de red de otras marcas
NETGEAR
NETGEAR FS526T - Switch Manual de usuario
Korenix
Korenix JetNet 5710G Series Manual de usuario
Automated Logic
Automated Logic ZN551 Manual del propietario
Cisco
Cisco ASR 1000 Series Manual del operador
EnGenius
EnGenius ESR-9710 Manual de usuario
Cisco
Cisco 805 Series Instrucciones de funcionamiento y seguridad