D-Link DSL-2540U Manual de usuario
Quick Installation Guide
DSL-2540U
ADSL Annex B/Ethernet Router with Built-in Switch
DSL-2540U Quick Installation Guide
BEFORE YOU BEGI
Delivery Package
•Router DSL-2540U
•Power adapter DC 12V/0.5A
•RJ-11 telephone able
•Ethernet able (CAT 5E)
•Splitter
•CD-ROM with “User Manual” and “Quick Installation Guide”
•“Quick Installation Guide” (bro hure).
If any of the items are missing, please onta t your reseller.
!Using a power supply with a different voltage rating than the one
included will cause damage and void the warranty for this product.
Default Settings
IP address of router 192.168.1.1
Username (login) admin
Password admin
System Requirements and Equipment
•A omputer with any operating system that supports a web browser.
•A web browser to a ess the web-based interfa e of the router: Windows
Internet Explorer, Mozilla Firefox, or Opera.
•A NIC (Ethernet adapter) to onne t to the router.
2
DSL-2540U Quick Installation Guide
CO ECTI G TO PC
PC with Ethernet Adapter
1. Make sure that your PC is powered off.
2. Conne t an Ethernet able between any of four Ethernet ports lo ated on
the ba k panel of the router and the Ethernet port of your PC.
3. To connect the router to a DSL line: onne t a phone able between the
DSL port of the router and the ADSL OUT port of the splitter. Conne t
your phone to the PHO E port of the splitter. Then onne t another
phone able between a phone ja k and the ADSL I port of the splitter.
4. To connect the router to an Ethernet line: onne t the Ethernet able
between any of four Ethernet ports lo ated on the ba k panel of the router
and the Ethernet line.
5. Conne t the power ord to the power onne tor port on the ba k panel of
the router, then plug the power adapter into an ele tri al outlet or power
strip.
6. Turn on your PC and wait until your operating system is ompletely
loaded.
Now you should onfigure your PC to obtain an IP address automati ally (as
DHCP lient).
3
DSL-2540U Quick Installation Guide
Obtaining IP Address Automatically in OS Windows XP
1. Cli k the Start button and pro eed to the Control Panel > etwork
and Internet Connections > etwork Connections window.
2. In the etwork Connections window, right- li k the relevant Local
Area Connection i on and sele t the Properties line in the menu
displayed.
3. In the Local Area Connection Properties window, on the General
tab, sele t the Internet Protocol (TCP/IP) line. Cli k the Properties
button.
4
DSL-2540U Quick Installation Guide
4. Sele t the Obtain an IP address automatically and Obtain D S
server address automatically radio buttons. Cli k the OK button.
5. Cli k the ОК button in the onne tion properties window.
Now your omputer is onfigured to obtain an IP address automati ally.
5
DSL-2540U Quick Installation Guide
Obtaining IP Address Automatically in OS Windows 7
1. Cli k the Start button and pro eed to the Control Panel window.
2. Sele t the etwork and Sharing Center se tion. (If the Control Panel
has the ategory view (the Category value is sele ted from the View by
drop-down list in the top right orner of the window), hoose the View
network status and tasks line under the etwork and Internet
se tion.)
3. In the menu lo ated on the left part of the window, sele t the Change
adapter settings line.
4. In the opened window, right- li k the relevant Local Area Connection
i on and sele t the Properties line in the menu displayed.
5. In the Local Area Connection Properties window, on the
etworking tab, sele t the Internet Protocol Version 4 (TCP/IPv4)
line. Cli k the Properties button.
6
DSL-2540U Quick Installation Guide
6. Sele t the Obtain an IP address automatically and Obtain D S
server address automatically radio buttons. Cli k the OK button.
7. Cli k the OK button in the onne tion properties window.
Now your omputer is onfigured to obtain an IP address automati ally.
7
DSL-2540U Quick Installation Guide
CO FIGURI G ROUTER
Connecting to Web-based Interface
1. Start a web browser.
2. In the address bar of the web browser, enter the IP address of the router
(by default, the following IP address is spe ified: 192.168.1.1). Press
the Enter key.
3. On the opened page, enter the username (login) and password for the
administrator a ount (by default, the following username and password
are spe ified: admin, admin). Then li k the Enter link.
!
It is strongly re ommended to hange the administrator password upon
initial onfiguration of the router. To do this, li k the Configure
manually button and pro eed to the System / Administrator
password page.
!
If the error “ The page cannot be displayed ” (or “ Unable to display the
page ”/“ Could not connect to remote server ”) o urs upon onne ting to
the web-based interfa e of the router, make sure that you have properly
onne ted the router to your omputer.
8
DSL-2540U Quick Installation Guide
After su essful registration the router's qui k settings page opens.
On the page, you an pro eed to the Wizards (use the Connect to internet
and Host site buttons) or swit h to the standard web-based interfa e of the
router by li king the Configure manually button. After li king the button,
the system statisti s page opens. The page displays general information on the
router and its software, and data on the DSL onne tion state.
To get ba k to the qui k settings page from any Wizard or web-based interfa e
menu se tion, left- li k the D-Link logo in the top left orner of the page.
The web-based interfa e of the router is multilingual. Sele t a needed language
from the menu displayed when the mouse pointer is over the Language
aption. You an hange the language of the web-based interfa e in any menu
item.
After sele ting the language, the notifi ation on unsaved hanges will be
displayed. Cli k the Save button to save the urrent language of the web-
based interfa e as the default language.
9
DSL-2540U Quick Installation Guide
Configuring Connection to t e Internet
!
You should onfigure your WAN onne tion in a ordan e with data
provided by your Internet servi e provider (ISP). Make sure that you
have obtained all ne essary information prior to onfiguring your WAN
onne tion. Otherwise onta t your ISP.
ADS WAN Connection
1. Go to the et / WA page and li k the Add button.
2. From the Connection Type drop-down list, sele t the needed value.
3. From the Port drop-down list, sele t the DSL(new) value.
4. Spe ify a name for your onne tion (any name for easier identifi ation) in
the ame field.
5. In the ATM se tion, spe ify the VPI and VCI in the relevant fields, and
then sele t a method of en apsulation from the Encapsulation Mode
drop-down list.
10
Otros manuales para DSL-2540U
8
Tabla de contenidos
Otros manuales de Enrutador de red de D-Link
D-Link
D-Link DSL-3785 Manual de usuario
D-Link
D-Link DSL-2641B - Wireless G Router Manual de usuario
D-Link
D-Link SharePort DIR-825 Manual de usuario
D-Link
D-Link Air DCS-1000W Manual de usuario
D-Link
D-Link DI-524UP Manual de usuario
D-Link
D-Link DWR-953 Manual de usuario
D-Link
D-Link DIR-827 Manual de usuario
D-Link
D-Link DIR-921 Manual de usuario
D-Link
D-Link DES-3010G Manual de usuario
D-Link
D-Link DGL-4300 - GamerLounge Wireless 108G Gaming... Manual de usuario
D-Link
D-Link DIR-855L Manual de usuario
D-Link
D-Link DSL-2750E Manual
D-Link
D-Link DSL-2640U Manual de usuario
D-Link
D-Link xStack DGS-3200-10 Manual de usuario
D-Link
D-Link EBR-2310 Manual de usuario
D-Link
D-Link DSL-560I Manual de usuario
D-Link
D-Link DGS-3700-12 Manual
D-Link
D-Link DIR-859 Manual de usuario
D-Link
D-Link DWR-921 Manual de usuario
D-Link
D-Link DSR-150 Manual de usuario
Manuales populares de Enrutador de red de otras marcas
NETGEAR
NETGEAR FS526T - Switch Manual de usuario
Korenix
Korenix JetNet 5710G Series Manual de usuario
Automated Logic
Automated Logic ZN551 Manual del propietario
Cisco
Cisco ASR 1000 Series Manual del operador
EnGenius
EnGenius ESR-9710 Manual de usuario
Cisco
Cisco 805 Series Instrucciones de funcionamiento y seguridad