D-Link DWA-192 Manual de usuario
DWA-192
Quick Install Guide
AC1900 Wi-Fi USB 3.0 Adapter
If any of the above items are missing, please contact your reseller.
Minimum Requirements
DWA-192 AC1900 Wi-Fi USB 3.0 Adapter
USB 3.0 Cable
Package Contents
Quick Install Guide
CD with drivers and documentation
• A desktop or laptop computer with an available USB port*
• Windows® 8 or 7 (32/64-bit)
• 300MHz processor and at least 64MB of RAM
• CD-ROM drive
• An 802.11ac or 802.11n wireless network
* For best performance, connect to a USB 3.0 port.
2
ENGLISH
Product Overview
USB 3.0 Connector
LED Ring
WPS Button
LED On/O
Button
LED Ring
A solid blue light indicates a proper connection to a
wireless network. This LED will blink if it is not connected
to a wireless network.
LED On/O
Button Press to turn the LED on or o.
USB 3.0
Connector
Connect the supplied USB 3.0 cable here and the other
end to your computer.
WPS Button
Press to start the WPS process. You will need to press
the WPS button on your wireless router within two
minutes. The light will turn solid blue when successfully
connected.
3
Before You Begin
1
Before installing your new D-Link wireless adapter, please verify the following:
• Remove any previous installations of wireless adapters.
• Uninstall any 3rd party wireless utility software.
• Disable any built-in wireless adapters.
• Verify the settings such as the wireless network name (SSID) and security settings
of the network(s) you want to connect to.
Do NOT plug the adapter into your computer before installing the
drivers.
Insert the DWA-192 CD in the CD-ROM drive. When the autorun screen
appears, click Setup.
Note: If the CD Autorun function does not automatically start on your computer,
go to Start > Run. In the run box type “D:\autorun.exe” (where D: represents the
drive letter of your CD-ROM drive) and click OK.
If your computer does not have a CD-ROM drive, you can download the drivers
from support.dlink.com.
Installation
2Select your language and click Next to continue.
4
ENGLISH
3When the welcome screen appears, click Next to continue.
4Select the installation location and click Next to continue.
5
5Connect the USB 3.0 cable to the adapter and then plug the other end into
an available USB port on your computer. Click Next to continue.
Note: The LED will not turn on until the drivers are installed.
6Allow 2-3 minutes to install. Ignore any Windows installation bubbles in
the lower right-hand corner. Once nished, click Finish to complete the
installation. The LED on the adapter should now turn on and blink.
6
ENGLISH
7You can now connect to your wireless network by using one of the two
methods shown below:
When your adapter has successfully connected to a wireless network, the
LED will turn solid blue.
A. Open your wireless utility and select the network you want to connect
to. If the network is secure you will be prompted to enter the Wi-Fi
password.
B. If your wireless router or access point supports WPS, press the WPS
button on the back of the adapter and then initiateWPS on your wireless
router or access point within two minutes.
WPS Button
7
Technical Support
This guide is for initial setup. Refer to the user manual to learn more or
visit our support website:
http://support.dlink.com/DWA-192
USA
http://support.dlink.ca/DWA-192
Canada
Version 1.00(NA)_85x120
April 23, 2015
6WA191NAQ001G
©2015 All Rights Reserved. D-Link and the D-Link logo are trademarks or registered trademarks
of D-Link. All other third-party marks mentioned herein may be trademarks of their respective
owners. Product specications, size and shape are subject to change without notice, and
actual product appearance may dier from that depicted on the packaging. Visit dlink.com
(USA) or dlink.ca (Canada) for more details.
DWA-192
Guide d’installation rapide
Adaptateur USB 3.0 Wi-Fi AC 1900
Communiquez avec votre revendeur s'il manque l'un des éléments
ci-dessus.
Exigences minimales
Adaptateur USB 3.0 Wi-Fi AC 1900 DWA-192
Câble USB 3.0
Contenu de la boîte
Guide d’installation rapide
CD avec les pilotes et la documentation
• Ordinateur de bureau ou portable avec un port USBdisponible*
• Windows® 8 ou 7 (32/64-bit)
• Processeur à 300MHz et au moins 64Mo de RAM
• Lecteur de CD-ROM
• Réseau sans l 802.11ac ou 802.11n
* Pour les meilleures performances, connectez-vous à un port USB 3.0.
2
ANGLAIS
Otros manuales para DWA-192
6
Tabla de contenidos
Idiomas:
Otros manuales de Adaptador de D-Link
D-Link
D-Link DWA140 - RANGE BOOSTER N USB ADAPTOR Manual de usuario
D-Link
D-Link DU-128TA+ Manual de usuario
D-Link
D-Link DWA-510 Manual de usuario
D-Link
D-Link DWL-G520M Manual de usuario
D-Link
D-Link DXE-810S Manual de usuario
D-Link
D-Link DUB-2332 Manual de usuario
D-Link
D-Link DWL-P200 Manual de usuario
D-Link
D-Link DWA-181 Manual de usuario
D-Link
D-Link PCMCIA WIRELESS ASAPTER DWL-650 Manual de usuario
D-Link
D-Link DUB-1310 Manual de usuario
D-Link
D-Link AirPlus G DI-524 Manual de usuario
D-Link
D-Link DWA-182 Manual de usuario
D-Link
D-Link DGE-560SX Manual de usuario
D-Link
D-Link Express EtherNetwork DNS-120 Manual de usuario
D-Link
D-Link AirPlus DWL-120+ Manual de usuario
D-Link
D-Link DHP-329AV Manual de usuario
D-Link
D-Link DUB-E100 Manual de usuario
D-Link
D-Link DWA-520 Manual de usuario
D-Link
D-Link RANGEBOOSTER G WUA-2340 Manual de usuario
D-Link
D-Link DUB-E100 Manual de usuario
