D-Link DWA-182 Manual de usuario

DWA-182

Quick Install Guide

Wireless AC1200

Dual Band USB Adapter

Quick Install Guide

If any of the above items are missing, please contact your reseller.

• An available USB slot

• Windows® 10, 8, 7, Vista® or macOS (10.6-10.12)

• An 802.11ac, 802.11n, or 802.11g wireless network

• 20MB of free hard drive space

• CD-ROM Drive

DWA-182 Wireless AC1200 Dual Band USB Adapter

CD with drivers and manual

Package Contents

System Requirements

Before installing your new D-Link wireless adapter, please verify the following:

• Remove any previous installations of wireless adapters.

• Disable any built-in wireless and/or Ethernet adapters.

• Verify the settings such as the wireless network name (SSID) and security

settings of the network(s) you want to connect to.

• Download the latest driver from http://support.dlink.com/DWA-182(US)

or http://support.dlink.ca/DWA-182 (Canada).

Before You Begin

Selectthe languageyou want thesetup wizardtodisplay.Click Next to continue.

The Welcome screen will appear. Click Next to continue.

You will now be asked to plug the DWA-182 adapter into an available USB

port. Once you plug it in, click Install to continue.

WARNING: Do NOT plug the adapter into your computer before installing

the drivers. You will be prompted to plug in your adapter during the setup.

Installation - Windows®10

1Insert the DWA-182 Driver CD into the CD drive. When the autorun screen

appears, click Install and follow the on-screen instructions.

Installation - Windows®

Note: If the CDAutorun function doesnot automatically start on yourcomputer, press

the Windows Key + “R”. In the run box type “D:\autorun.exe” (where D: represents

the drive letter of your CD drive) and click OK.

If your computer does not have a CD drive, download the DWA-182 driver

software by visiting http://support.dlink.com/DWA-182 (USA) or

http://support.dlink.ca/DWA-182 (Canada).Click the Downloadstab and selectyour

hardware revision in the drop down eld.

WARNING: Do NOT plug the adapter into your computer before installing

the drivers. You will be prompted to plug in your adapter during the setup.

Installation - macOS

Open the disc drive (CD icon) that should appear on your desktop.

Navigate to the Mac OS Drivers folder and install the driver that corresponds

to your MacBook's software version. If you are not sure, go to the Apple icon

on the top left of your toolbar and click About this Mac and then More Info.

Run Installer.pkg and follow the instructions.

Note: Insert the CD before connecting the DWA-182 to your Mac.

The drivers will now be installed.This process may take a minute to complete.

Once the InstallShield Wizard Complete screen appears, the DWA-182 has

been successfully installed. Click Finish to exit the Install Wizard.

Click on the Wi-Fi Connection icon in the bottom right corner of the screen.

Select the wireless network you want to connect to. Please enter the password

for your wireless network if prompted.You are now connected to your wireless

network. If your Wi-Fi router supports WPS (Wi-Fi Protected Setup), you can

use theWPS button on your adapter to automatically congure and connect

to your wireless network. See the “Using WPS to Connect to Your Wireless

Network”for more details.

Connect to Your Wireless Network

5V ---3A

1 2 LAN 3 4 INTERNET USB

RESET

INTERNET

Press the WPS button (or launch the WPS

process) on your wireless router or access

point. Please consult your router or access

point’s user manual on how to start the WPS

process.

Connect to your wireless network using the WPS button setup method.

Within two minutes, press the WPS button on

your DWA-182 adapter.

After two minutes your adapter will be securely connected to your wireless

network.

There are three ways to connect to a wireless network:

A. WPS Setup - Use if your wireless router supports WPS (Wi-Fi Protected Setup).

Simply press the WPS button on your adapter and your router to automatically

congure and connect.

B. Wireless Utility (Windows) - Use the D-Link Wireless Connection Manager to

display a list of wireless networks. Select the network you want and click Connect.

C.Wireless Utility (Mac OS X) - Use the built-in Connection Manager to display a

list of wireless networks. Select the network you want and click Connect.

A. WPS Setup

Double-clicktheWirelessConnectionManager

icon on your desktop to bring up the list of

available networks.

Select the wireless network you would like to

connect to from the list and click the Connect

button.Itmaytakeaminutewhiletheconnection

is established.

If the wireless network you are connecting to has

security (encryption) enabled, enter the security

password (key) and click Next to continue.

Note: Insomecases,the Windowsbuilt-inwirelessutilitymay disablethe D-Link

Utility. Use the Windows utility in the same manner to connect to your wireless

network.

B. Wireless Utility (Windows)

Note: The password is case-sensitive and must be typed in exactly the same as

on your wireless router or access point.

4You are now connected to your wireless network.

C. Wireless Utility (macOS)

Click the Airport Wireless icon on the top right corner of the screen.

Select the wireless network you

want to connect to.

If the wireless network is password

protected, you will be prompted for

a password. Enter the Password and

click Join.

You are now connected to your wireless network.

Technical Support

This guide is only for the rst time conguration. Refer to the user manual to learn

more, or visit http://suport.dlink.com/dwa-182 (USA) or http://support.dlink.ca/

dwa-182 (Canada) for more information. Also feel free to contact us through our

website.

Version 4.00 (CA)_90x130

October 25, 2017

5302793

third-party marks mentioned herein may be trademarks of their respective owners. Maximum wireless signal rate derived

from IEEE Standard 802.11ac, 902.11a, 802.11g, and 802.11n specications. Actual data throughput will vary. Network

conditions and environmental factors, including volume of network trac, building materials and construction, and

network overhead, lower actual data throughput rate. Environmental conditions will adversely aect wireless signal range.

Product specications, size and shape are subject to change without notice, and actual product appearance may dier

from that depicted on the packaging. This publication may not be reproduced, in whole or in part, without prior express

written permission from D-Link Systems, Inc. Visit www.dlink.com for details.

http://support.dlink.com/DWA-182

http://support.dlink.ca/DWA-182

USA

Canada

DWA-182

Guide

d’installation rapide

Adaptateur USB bi-bande

sans l AC1200

Guide d’installation rapide

Contactez votre revendeur s’il manque l’un des éléments ci-dessus.

• Un port USB disponible

• Windows®10, 8, 7, Vista® ou XP (32/64-bit)

• Un réseau sans l 802.11ac, 802.11n ou 802.11g

• 20 MB de disque dur

• Lecteur de CD

Adaptateur USB bi-bande AC1200 sans l DWA-182

CD avec les pilotes et le manuel

Contenu de la boîte

Conguration système requise

Avant d’installer le nouvel adaptateur sans l D-Link, s’il vous plaît compléter ce

qui suit:

• Désinstallez tous les adaptateurs sans l déjà installés.

• Désactivez tous les adaptateurs sans l et/ou Ethernet intégrés.

• Vériez lesparamètrestelsque leSSID (nom du réseausans l) et lesparamètres

de sécurité du ou des réseaux auxquels vous voulez vous connecter.

• Téléchargez le pilote DWA-182 en vous rendant à http://support.dlink.com/

DWA-182 (États-Unis) ou http://support.dlink.ca/DWA-182 (Canada).

Avant de commencer

Otros manuales para DWA-182

Tabla de contenidos

Idiomas:

Otros manuales de Adaptador de D-Link

D-Link

D-Link DHN-520 Manual de usuario

D-Link

D-Link DWA-620 Manual de usuario

D-Link

D-Link dlinkgo GO-USB-N150 Manual de usuario

D-Link

D-Link DWL-G650M - Super G With MIMO Manual de usuario

D-Link

D-Link AirPlus Xtreme G WUA-2340 Manual de usuario

D-Link

D-Link DWA-185 Manual de usuario

D-Link

D-Link DWL-AG132 Manual de usuario

D-Link

D-Link DUB-E100 Manual de usuario

D-Link

D-Link DWL-500 - 11Mb Wireless LAN PCI Network Card Manual de usuario

D-Link

D-Link DGE-550T Manual de usuario

D-Link

D-Link Air DWL-120 Manual de usuario

D-Link

D-Link AirPlus DWL-120+ Manual de usuario

D-Link

D-Link DWA-182 Manual de usuario

D-Link

D-Link DHP-P600AV Manual de usuario

D-Link

D-Link Air DWL-520 Manual de usuario

D-Link

D-Link DWL-P50 Manual de usuario

D-Link

D-Link DWL-P50 Manual de usuario

D-Link

D-Link AC1900 Manual de usuario

D-Link

D-Link WNA-1330 Manual de usuario

D-Link

D-Link DWA-548 Manual de usuario

D-Link

D-Link DHP-600AV Manual de usuario

D-Link

D-Link DWL-P100 Manual de usuario

D-Link

D-Link DVG-2001S Manual de usuario

D-Link

D-Link DBT-122 Manual de usuario

Manuales populares de Adaptador de otras marcas

PCB Piezotronics

PCB Piezotronics 090B274 Manual de usuario

Auvidea

Auvidea J20 Manual del producto

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manual de usuario

Akribis

Akribis ITF-21-BISS-MIT Manual de usuario

Tenda

Tenda W54U Manual de usuario

ROHO

ROHO AGILITY Manual de usuario

PROLiNK

PROLiNK WN2001 Manual de usuario

Hawking

Hawking HUF2 Manual de usuario

Airlink101

Airlink101 AWLC4030 Manual de usuario

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manual de usuario

Philips

Philips SWA4554S/10 Manual de usuario

JVC

JVC TS-C9D2B Manual de instrucciones

NETGEAR

NETGEAR A6100 Manual de usuario

Philips

Philips SWA2037 Manual de usuario

Basalte

Basalte 0610-20 Manual de usuario

Yealink

Yealink EHS40 Manual de usuario

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manual de usuario

RCA

RCA AH57R Manual de usuario