Cypress CMLUX-4H4CAT Manual de usuario

CMLUX-4H4CAT

4 by 4 HDMI V1.3

over CAT6 Matrix with IR

Return Control

Operation Manual

CMLUX-4H4CAT

Disclaimers

The information in this manual has been carefully checked and

is believed to be accurate. Cypress Technology assumes no

responsibility for any infringements of patents or other rights of third

parties which may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies

that may be contained in this document. Cypress also makes

no commitment to update or to keep current the information

contained in this document.

Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer le, in any form or by any means

- electronic, mechanical, magnetic, optical, chemical, manual,

or otherwise - without express written permission and consent from

Cypress Technology.

Version 1.0 October 2009

Trademark Acknowledgments

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

Safety Precautions

Please read all instructions before attempting to unpack or install or

operate this equipment, and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

 Always follow basic safety precautions to reduce the risk of

re, electrical shock and injury to persons.

 To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

 Never spill liquid of any kind on or into this product.

 Never push an object of any kind into this product through

module openings or empty slots, as you may damage parts.

 Do not attach the power supply cabling to building surfaces.

 Do not allow anything to rest on the power cabling or allow it to

be abused by persons walking on it.

 To protect the equipment from overheating, do not block the

slots and openings in the module housing that provide

ventilation.

Revision History

Version No Date Summary of Change

V1 20091001 Preliminary Release

VR2 20120416 IR Blaster's Frequency

Table of Contents

1. Introduction.....……………………..…………………................................

2. Applications...........................…..…………………………………….....…

3. Package Contents..............................……………………………….…….

4. System Requirements.............................……………………………..……

5. Features................................…..…………………………………...………..

6. Specications..........................................................................................

7. Operation Controls and Functions.....................……...……...…………..

7.1. Front Panel......................…………………………………...…………..

7.2. Rear Panel.......................…………………………………...…………..

8. Remote Control.......................…..……………………………...…………..

9. RS-232 Protocol.......................…………..……………………...…………..

9.1 Pin Denitions................…………..……………...……...………......…..

9.2 Commands................…………………….……………...……….....…..

9.3. IR Cable Pin Denitions................………….……………...……....…..

10. 3.5Ø Connectors Pin Denitions.............................................................

10.1 IR IN Pin Denitions...........…………..……………………..……….…..

10.2 IR OUT Pin Denitions..........………………….…………….…………..

10.3 RJ-45 Pin Denitions...………….……………...………..................…..

11. Connection and Installation...................................................................

12. Acronyms.................................................................................................

1. Introduction

The CMLUX-4H4CAT is a 4 x 4 HDMI over CAT6 Matrix that is a high

performance device, boasting features such as a remote control, IR blaster

and IR receiver. Compatible with Deep Color Video and high denition

digital audio, this device has the ability to direct any of its four HDMI sources

to any of the four HDMI displays, with each display showing a different

source. Furthermore, since the signal is sent over CAT6 cables, you gain a

long operating distance (50m at 1080p 8 bits) and if connected to a CAT 6

receiver or splitter you can extend your operating range over even longer

distances. Lastly, with four individual output IR blasters, users are able to

control the input sources with their existing remote controls. Are you in need

of a device that offers you complete control over HDMI devices and displays,

then look no further the CMLUX-4H4CAT 4 x 4 HDMI over CAT6 Matrix is the

device you have been searching for.

2. Applications

 Control multiple sources and displays

 Integrate your home entertainment system

 Multi-task project presentation

 Showroom Display

 Advertising Display control

 System installation control

3. Package Contents

 4 by 4 HDMI Matrix

 Remote Control (with Battery)

 1 x IR Receiver

 4 x IR Blasters

 5V DC Power Supply Adaptor

 Power Cord

 Operation Manual

4. System Requirements

 Input source equipment with HDMI cable(s).

 Output source equipment(s) with HDMI cable(s) and CAT6 to HDMI

receiver(s).

5. Features

 HDCP 1.1 and DVI 1.0 compliant.

 Supports HDMI with Deep Color Video of up to 36 bits (12bits/ color) and

high denition (Dolby TrueHD, Dolby Digital Plus and DTS-HD Master

Audio) digital audio.

 When the HDMI signal passes through this device it is compensated,

clock/phase adjusted and jitter free.

 Input/output LED indicators.

 Compatible with most HDMI sources and displays .

 Supports a wide range of PC and HDTV resolutions from VGA to UXGA

and 480i to 1080p .

 Has RS-232 control

 Supports IR remote control with an IR extender and blaster.

 Dolby Digital, DTS digital audio transmission (32-192 kHz Fs sample rate).

 Indicates whether the source is HDCP, HDMI or DVI via an LED light.

 Cable testing showed that at 1080p/8 or 12 bits resolution the input &

output source(s) can be up to 15 meters away.

Notes:

A. Cables used for testing were CAT6 and 23AWG, using cables of another

type will result in a different operating distance.

B. Equipment used for cable distance testing: PS3 20G, 37" Philips 8 LCD TV

and 37" SAMSUNG 12 bit LCD TV.

C. Figures provided in this manual are for reference use only, actual with

performance will depend on the type of source and display used, along

your cables specication.

Video Bandwidth 2.25 MHz/6.75Gbps

Input Ports 4 x HDMI female ports,

Output Ports 4 x Video/DDC CAT 6 ports

EDID Standard, TV/Moving Port 1

ESD Protection Human body model: ±10kV (air-gap discharge)

±6kV (contact discharge)

HDMI Audio Output PCM2, PCM5.1, PCM7.1, Dolby5.1, DTS5.1, DD+,

D-TrueHD, and DTS-HD

HDMI Cable In 1080p 8-bit (15M), 1080p 12-bit (15M)

HDMI Cable Out 1080p 8-bit (15M), 1080p 12-bit (15M)

CAT6 Cable Out 1080p 8-bit (45M), 1080p 12-bit (15M)

Color Space RGB_24/36, YCbCr 4:4:4_24/36, YCbCr 4:2:2, xvYCC

IR IN/OUT Yes/Yes

Deep Color 1080p 12-bit

HDMI Resolution 480i~1080p 50/60, 1080p 24, VGA~UXGA

DVI Resolution 480i~1080p 50/60, 1080p 24, VGA~UXGA

Power Supply 5V DC/6A (US/EU standards, CE/FCC/UL certied)

Dimensions (mm) 438(W) x 175(D) x 44(H)

Weight(g) 2150

Chassis Material Aluminum

Silkscreen Color Black

Operating Temperature 0°C ~ 40°C / 32°F ~ 104°F

Storage Temperature -20°C ~ 60°C / -4°F ~ 104°F

Relative Humidity 20% ~ 90% RH (non-condensing)

Power Consumption 16.5W (MAX)

6. Specications

7. Operation Controls and Functions

7.1 Front Panel

CMLUX-4H4CAT

HDMI V1.3 to CAT6 4X4 Matrix

POWER1234

HDCP HDMI/DVI

1234

HDCP HDMI/DVI

1234

HDCP HDMI/DVI

1234

HDCP HDMI/DVI

IN IN IN IN

ABHDMI OUT

①② ③ ④⑤

①. Remote control sensor.

②. Power switch & LED Indicator: This LED will illuminate when the power is

turned on.

③. Input Select/Indicators (A/B/C/D): Repeatedly press each “HDMI out”

button to switch to your desired source. The LED that turns on will indicate

which input source is being selected and routed to the HDMI A display.

④. HDCP indicators: This LED will illuminate once the input source being

played comes with a HDCP protection.

⑤. HDMI/DVI indicators: When the input source has HDMI content, this LED

will turn on. When the input source has DVI content, this LED will not turn on.

7.2 Rear Panel

CAT6 OUTPUT

HDMI INPUT

IR OUT

STDTV DDC VIDEO

EDID

43 21

DC 5V

DDDC VIDEO

CDDC VIDEO

BDDC VIDEO

IN OUT

IR MAIN

RS-232

③ ④ ⑤ ⑥⑦⑧

①②

①. EDID Control Switcher: The default factory setting is TV, leave as is when

content is displayed properly. Switch to STD to use built-in EDID.

Note:

1. When EDID is switched to TV, the unit will detect the rst HDMI output

source’s EDID and record it in the unit. If the rst detected output

source is DVI, it will skip onto the next source until the rst HDMI source is

detected. The detection priority is HDMI v1.3 > HDMI v1.2 > DVI.

2. When EDID is switched to STD, the unit will use its built-in EDID that

supports:

Video →1080p 12-bit (max) supports xvYCC

Audio →PCM 2CH

3. The EDID selection will only be activated after the unit is re-plugged

and powered on.

②. RS-232: This slot is where you connect a D-Sub 9 pin cable to the PC COM

port when controlling the device over RS-232. Detailed specications are

listed in section 9.

③. Video/DDC CAT6 outputs: These slots are where you connect two

CAT6 cables to a receiver box that has HDMI output and through the

HDMI output it can be connect to TV. The receiver box can also be a

splitter that provides additional CAT6 outputs when cascading from a

HDMI receiver to the display via HDMI cable.

④． IR OUT: These slots are where you connect the IR blaster cables that were

included in the package. Place them near each source device in order

to properly send an infrared signal.

⑤． HDMI inputs: These slots are where you connect the HDMI input ports

to the HDMI/DVI output ports of your source device such as a DVD/Blu

Ray player or Set Top Box, using HDMI cables.

⑥． Power: Plug the 5V DC power supply into the unit and connect the

adaptor to an AC outlet.

⑦． IR MAIN IN: This slot is where you connect the IR receiver cable included

in the package. Connecting the IR receiver cable allows you to control

your source devices using the existing remote controls.

⑧. IR MAIN OUT: This slot is where you connect the IR blaster cable included

in the package. Place it near both the device and/or source equipments

for infrared signal sending.

8. Remote Control

1. Power: Press this button to turn on/off the unit.

2. Input Select for HDMI OUT A: Press 1, 2, 3 or 4 to

select the desired input source for HDMI OUT A.

3. Input Select for HDMI OUT B: Press 1, 2, 3 or 4 to

select the desired input source for HDMI OUT B.

4. Input Select for HDMI OUT C: Press 1, 2, 3 or 4 to

select the desired input source for HDMI OUT C.

5. Input Select for HDMI OUT D: Press 1, 2, 3 or 4

to select the desired input source for HDMI OUT D.

9. RS-232 Protocol

9.1 Pin Denitions

* RS-232 transmission format:

Baud Rate: 9600bps

Data Bit: 8 bits

Parity: None

Stop Bit: 1 bit

Flow Control: None

CMLUX-4H4CAT Remote Control Console

PIN Denitions

→

←

PIN Denitions

1 NC 1 NC

2 TxD 2 RxD

3 RxD 3 TxD

4 NC 4 NC

5 GND 5 GND

6 NC 6 NC

7 NC 7 NC

8 NC 8 NC

9 NC 9 NC

Otros manuales para CMLUX-4H4CAT

Tabla de contenidos

Otros manuales de Conmutador de matriz de Cypress

Cypress

Cypress CMIR-44 Manual de usuario

Cypress

Cypress CPCD-41AR Manual de usuario

Cypress

Cypress CHMX-44 Manual de usuario

Cypress

Cypress CHMX-22AS Manual de usuario

Cypress

Cypress CMSI-8H8HS Manual de usuario

Cypress

Cypress CCMX-44 Manual de usuario

Cypress

Cypress CMLUX-24S Manual de usuario

Cypress

Cypress CMLUX-4H4CAT Manual de usuario

Cypress

Cypress CCMX-44DA Manual de usuario

Cypress

Cypress CDPS-UC4H4CVES Manual de usuario

Cypress

Cypress CMLUX-42S Manual de usuario

Cypress

Cypress CMLUX-22S Manual de usuario

Cypress

Cypress CMLUX-42S Manual de usuario

Cypress

Cypress CMLUX-44E Manual de usuario

Cypress

Cypress CMPRO-U4H4CVE Manual de instalación

Manuales populares de Conmutador de matriz de otras marcas

Broadcast Tools

Broadcast Tools SS 8.2 Manual de usuario

Altimium

Altimium MATF32 Manual de usuario

ALFAtron

ALFAtron ALF-MUK44N Manual de usuario

Monoprice

Monoprice Blackbird 15377 Manual de usuario

Kramer

Kramer XL 3216VS Manual de usuario

PTN

PTN FMX12 Manual de usuario

CYP

CYP nT15GX01 Manual de usuario

Kramer

Kramer VP-2x2 Manual de usuario

Kramer

Kramer Sierra Video 6432V5xl Manual de usuario

TESmart

TESmart HMA0402A40 Manual de usuario

Octava

Octava HD4XSTPMX Manual de usuario

Intelix

Intelix FLX-88 Instrucciones de funcionamiento

Kramer

Kramer LASSEN XL 3232S Manual de usuario

Roland

Roland XS-1HD Manual de usuario

Kramer

Kramer VS-66HDCPxl Manual de usuario

Atlona

Atlona AT-HDMI-22M Manual de usuario

Link

Link HD8X8 Manual de usuario

AMX

AMX AVS-OP-2020-117 Instrucciones y recetas