Cypress CMLUX-4H4CAT Manual de usuario
CMLUX-4H4CAT
4 by 4 HDMI V1.3
over CAT 6 Matrix with IR
Return Control
Operation Manual
CMLUX-4H4CAT
Disclaimers
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes
no commitment to update or to keep current the information
contained in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
Copyright Notice
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means
- electronic, mechanical, magnetic, optical, chemical, manual,
or otherwise - without express written permission and consent from
Cypress Technology.
© Copyright 2009 by Cypress Technology.
All Rights Reserved.
Version 1.0 October 2009
Trademark Acknowledgments
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
Safety Precautions
Please read all instructions before attempting to unpack or install or
operate this equipment, and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
Always follow basic safety precautions to reduce the risk of
re, electrical shock and injury to persons.
To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
Never spill liquid of any kind on or into this product.
Never push an object of any kind into this product through
module openings or empty slots, as you may damage parts.
Do not attach the power supply cabling to building surfaces.
Do not allow anything to rest on the power cabling or allow it to
be abused by persons walking on it.
To protect the equipment from overheating, do not block the
slots and openings in the module housing that provide
ventilation.
Revision History
Version No Date Summary of Change
V1 20091001 Preliminary Release
Table of Contents
1
1
1
1
2
3
4
4
4
6
6
6
7
8
8
8
8
8
9
10
1. Introduction.....……………………..…………………................................
2. Applications...........................…..…………………………………….....…
3. Package Contents..............................……………………………….…….
4. System Requirements.............................……………………………..……
5. Features................................…..…………………………………...………..
6. Specications..........................................................................................
7. Operation Controls and Functions.....................……...……...…………..
7.1. Front Panel......................…………………………………...…………..
7.2. Rear Panel.......................…………………………………...…………..
8. Remote Control.......................…..……………………………...…………..
9. RS-232 Protocol.......................…………..……………………...…………..
9.1 Pin Denitions................…………..……………...……...………......…..
9.2 Commands................…………………….……………...……….....…..
9.3. IR Cable Pin Denitions................………….……………...……....…..
10. 3.5Ø Connectors Pin Denitions.............................................................
10.1 IR IN Pin Denitions...........…………..……………………..……….…..
10.2 IR OUT Pin Denitions..........………………….…………….…………..
10.3 RJ-45 Pin Denitions...………….……………...………..................…..
11. Connection and Installation...................................................................
12. Acronyms.................................................................................................
1. Introduction
This HDMI over CAT6 Matrix is a high performance equipment with remote
control, IR blaster and receiver. It is compatible with HDMI v1.3 specications, a
cutting-edge technology which denes support for Deep Color (12 bits/color)
video and new lossless compressed (Dolby TrueHD, Dolby Digital Plus and
DTS-HD Master Audio) digital audio. It offers you the maximum convenience
in HDMI signal distribution, when you need to have multiple HDMI sources and
displays connected together. Each of the four HDMI sources can be directed
to any one of the four HDMI displays, so each display can show a different
source. When HDMI signal progresses through the system, it is re-timed, and
level-compensated. Furthermore, Since signal is transferred over CAT 6, the
distance can be extended over a long range (>50m at 1080p 8 bits) yet at
a very low cost. CAT 6 connection can also be built with cascaded function
with other devices to enjoy real time play and no signal loss. Moreover, with
four induviduals output IR blaster systems users can easily control the input
source by the existing remote controls.
2. Applications
Multi-source with multi-display control
Home entertainment integration
Multi-task project presentation
Showroom Display
Advertising Display control
System installation control
3. Package Contents
4 by 4 HDMI V1.3 Matrix
Remote Control (with Battery)
1 x IR Receiver
5 x IR Blaster
5V DC Power Supply Adaptor
Power Cord
Operation Manual
4. System Requirements
Input source equipment with HDMI cable(s).
Output source equipment(s) with HDMI cable(s) and CAT 6 to HDMI
receiver(s).
1
5. Features
HDMI 1.3, HDCP 1.1 and DVI 1.0 compliant
Supports digital video formats in Deep Color Mode of up to 36 bits (12bits/
color) and new lossless compressed (Dolby TrueHD, Dolby Digital Plus
and DTS-HD Master Audio) digital audio
HDMI input compensation, clock / phase adjustments, and jitter
eliminated guaranteed to output a brand new standard HDMI signal
Supports input source LED indicators on each output select
Compatible with all HDMI sources and displays
Supports a wide range of PC and HDTV resolutions from VGA to UXGA
and 480i to 1080p
Supports RS-232 control
Supports IR remote control with IR extender and blaster
Dolby Digital, DTS digital audio transmission (32-192 kHz Fs sample rate)
Supports CAT 6 cables of variable types
Denes HDCP, HDMI and DVI source via LED light
Supports high denition resolution, the cable distance test at 1080p/8
or 12 bits resolution: input & output sources max. distance up to 15
meters
Notes:
A. Cable used during testis CAT-6E / 23AWG / Solid and therefore, cables of
different specication may have different distance results.
B. Cable distance test equipment used: PS3 20G, 37" Philips 8 bit LCD TV and
37" SamSung 12 bit LCD TV.
C. Figures provided in this manual are for reference use only, actual gures
very depending on source and display used with cable specication.
2
Frequency Bandwidth 2.25Gbps (single link)
Input Ports 4 x HDMI female ports,
Output Ports 4 x Video/DDC CAT 6 ports
EDID Standard, TV/Moving Port 1
ESD Protection Human body model: ± 10kV (air-gap discharge)
± 6kV (contact discharge)
HDMI Audio Output PCM2, PCM5.1, PCM7.1, Dolby5.1, DTS5.1, DD+,
D-TrueHD, and DTS-HD
HDMI Cable In 1080p 8-bit (15M), 1080p 12-bit (15M)
HDMI Cable Out 1080p 8-bit (15M), 1080p 12-bit (15M)
CAT 6 Cable Out 1080p 8-bit (45M), 1080p 12-bit (15M)
Color Space RGB_24/36, YCbCr 4:4:4_24/36, YCbCr 4:2:2, xvYCC
IR IN/OUT Yes/Yes
Deep Color 1080p 12-bit
HDMI Resolution 480i~1080p 50/60, 1080p 24, VGA~UXGA
DVI Resolution 480i~1080p 50/60, 1080p 24, VGA~UXGA
Power Supply 5VDC/6A (US/EU standards, CE/FCC/UL certied)
Dimensions (mm) 438(W) x 175(D) x 44(H)
Weight(g) 2150
Chassis Material Aluminum
Silkscreen Color Black
Operating Temperature 0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature -20°C ~ 60°C / -4°F ~ 104°F
Relative Humidity 20% ~ 90% RH (non-condensing)
Power Consumption 16.5W (MAX)
6. Specications
3
7. Operation Controls and Functions
7.1 Front Panel
①. Remote control sensor.
②. Power switch & LED Indicator: This LED will illuminate when the power is
turned on.
③. Input Select/Indicators (A/B/C/D): Press each “HDMI out” button
repeatedly to switch to your desired source. The LED that illuminates to
indicate the input source being selected and routed to HDMI A display.
④. HDCP indicators: This LED will illuminate once the input source being
played comes with a HDCP protection.
⑤. HDMI/DVI indicators: When the input is HDMI content, this LED will
illuminate. When playing DVI from the input source, this LED will not
illuminate.
7.2 Rear Panel
①. EDID Control Switcher: Default factory setting is on TV, leave as it is when
the display is displaying properly. Switch to STD to use built-in EDID.
Note:
1. When EDID is switched to TV, the unit will detect the rst HDMI output
source’s EDID and record it in the unit. If the rst detected output
source is DVI, it will skip onto the next source until the rst HDMI source
is detected. The detection priority is HDMI v1.3 > HDMI v1.2 > DVI.
CMLUX-4H4CAT
HDMI V1.3 to CAT6 4X4 Matrix
POWER 1 2 3 4
HDCP HDMI/DVI
1234
HDCP HDMI/DVI
1234
HDCP HDMI/DVI
1 2 3 4
HDCP HDMI/DVI
IN IN IN IN
A BHDMI OUT C D
①② ③ ④⑤
CAT6 OUTPUT
HDMI INPUT
STD TV DDC VIDEO
EDID
RS-232
43 2 1
DC 5V
DDDC VIDEO
CDDC VIDEO
BDDC VIDEO
A
IR OUT
4 3 2 1
IN OUT
IR MAIN
③ ④ ⑤ ⑥⑦⑧
①②
4
2. When EDID is switched to STD, the unit will use its built-in EDID that
supports:
Video →1080p 12-bit (max) supports xvYCC
Audio →PCM 2CH
3. The EDID selection will only be activated after the unit is re-plugged
and powered on.
②. RS-232: This slot is where you connect a D-Sub 9-pin cable to the PC COM
port when controlling the device over RS-232. Detailed specications
arelisted in section 9.
③. Video/DDC CAT 6 outputs: These slots are where you connect two
CAT6 cables to a receiver box that has HDMI output and through the
HDMI output it can be connect to TV. The receiver box can also be a
splitter that provides additional CAT6 outputs when cascading from a
HDMI receiver to the display via HDMI cable.
④． IR OUT: These slots are where you connect with IR blaster cables included
in the package. Place it near each designate source equipment for
infrared signal sending.
⑤. HDMI inputs: These slots are where you connect input ports to the HDMI
or DVI output of your source equipments such as DVD player or set-top-
box with HDMI cables.
⑥. Power: Plug the 5VDC power supply into the unit and connect the
adaptor to an AC wall outlet.
⑦. IR MAIN IN: This slot is where you connect the IR receiver cable included
in the package. Connecting the IR receiver cable allows you to source
equipments through the existing remote controls.
⑧. IR MAIN OUT: This slot is where you connect the IR blaster cable included
in the package. Place it near both the device and/or source equipments
for infrared signal sending.
5
8. Remote Control
1. Power: Press this button to turn on/off the unit.
2. Input Select for HDMI OUT A: Press 1, 2, 3 or 4 to
select the desired input source for HDMI OUT A.
3. Input Select for HDMI OUT B: Press 1, 2, 3 or 4 to
select the desired input source for HDMI OUT B.
4. Input Select for HDMI OUT C: Press 1, 2, 3 or 4 to
select the desired input source for HDMI OUT C.
5. Input Select for HDMI OUT D: Press 1, 2, 3 or 4
to select the desired input source for HDMI OUT D.
9. RS-232 Protocol
9.1 Pin Denitions
* RS-232 transmission format:
Baud Rate: 9600bps
Data Bit: 8 bits
Parity: None
Stop Bit: 1 bit
Flow Control: None
5
CMLUX-4H4CAT Remote Control Console
PIN Denitions
→
←
PIN Denitions
1 NC 1 NC
2 TxD 2 RxD
3 RxD 3 TxD
4 NC 4 NC
5 GND 5 GND
6 NC 6 NC
7 NC 7 NC
8 NC 8 NC
9 NC 9 NC
6
Otros manuales para CMLUX-4H4CAT
1
Tabla de contenidos
Otros manuales de Conmutador de matriz de Cypress
Cypress
Cypress CDPS-UC4H4CVES Manual de usuario
Cypress
Cypress CMLUX-22S Manual de usuario
Cypress
Cypress CHMX-22AS Manual de usuario
Cypress
Cypress CMLUX-4H4CAT Manual de usuario
Cypress
Cypress CMPRO-U4H4CVE Manual de instalación
Cypress
Cypress CCMX-44 Manual de usuario
Cypress
Cypress CCMX-44DA Manual de usuario
Cypress
Cypress CMLUX-42S Manual de usuario
Cypress
Cypress CMLUX-42S Manual de usuario
Cypress
Cypress CHMX-44 Manual de usuario
