CYP CP-255ID Manual de usuario
CP-255ID
CV, SV, VGA and DVI to DVI Scaler / Converter
OPERATION MANUAL
DISCLAIMERS
The information in this manual has been carefully checked and is
believed to be accurate. CYP (UK) Ltd assumes no responsibility for any
infringements of patents or other rights of third parties which may result
from its use.
CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be
contained in this document. CYP (UK) Ltd also makes no commitment to
update or to keep current the information contained in this document.
CYP (UK) Ltd reserves the right to make improvements to this document
and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed,
stored in a retrieval system, or any of its part translated into any language
or computer le, in any form or by any means—electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise—without express
written permission and consent from CYP (UK) Ltd.
© Copyright 2011 by CYP (UK) Ltd.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate
this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts inside
the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if
it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sucient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE SUMMARY OF CHANGE
v1.00 17/04/2013 First release
CONTENTS
1. Introduction ...........................................6
2. Applications ...........................................6
3. Package Contents ..................................6
4. System Requirements ...........................6
5. Features ..................................................7
6. Operation Controls and Functions .......8
6.1 Front Panel ................................................... 8
6.2 Rear Panel ..................................................... 9
6.3 Remote Control ........................................10
6.4 RS-232 Protocols ......................................11
6.5 RS-232 Commands ..................................12
6.6 OSD MENU .................................................14
7. Connection Diagram .......................... 18
8. Specications ...................................... 19
8.1 Technical Specications ........................19
8.2 Resolution Support .................................20
9. Acronyms ............................................. 22
6
1. INTRODUCTION
The CP-255ID is a Digital Video Scaler designed to accept Composite
Video, S-Video, PC, and DVI input signals. These inputs can be switched
and scaled and are outputted via DVI port.
External audio input signals can be switched and sent to the L/R output
port correspondingly with the video source selection. The control can be
done through on-panel buttons, IR remote, or RS-232, and there is OSD
(On Screen Menu) providing selection and system information. The device
provides full range of output resolutions, up to 1080p for HDTV timing,
and WUXGA (RB) for PC timing. The control can be done through on-
panel buttons, IR remote, or RS-232, and there is OSD (On Screen Menu)
providing selection and system information.
2. APPLICATIONS
Analogue to Digital video signal conversion
Analogue and Digital Source Integration
Upscaling Standard denition video for High-Denition displays
3. PACKAGE CONTENTS
Digital Video Scaler
Remote Control (CR-118)
Power Adaptor
Operation Manual
4. SYSTEM REQUIREMENTS
Source equipment such as PC/Laptop or DVD Player with HDMI to DVI
adaptor, analogue sources via standard cabling and DVI display with
active speakers and connection cables.
7
5. FEATURES
Supports the conversion of multiple video and audio formats to DVI
Supports synchronized output for input video and output audio
signals
Supports 3D de-interlacing, noise reduction and Comb lter
Supports frame rate conversion
Supports control via RS-232, IR Remote handset and front panel
controls
8
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
RETNEUNEMIVDCPVSVCREWOP
-
+
DIGITAL VIDEO SCALER CP-255ID XGA
720P
1 2 4 53
1 POWER & LED: Press this button to switch the device ON or to put
the device into standby mode. When the device is connected to an
active power supply the LED will illuminate and the device will switch
ON automatically.
2 IR (IR window): Receives only the IR signal from the supplied remote
control.
3 INPUT button and LEDs (CV/SV/PC/DVI):
Press to directly select the required input. An LED will illuminate to
indicate the currently selected source.
4 MENU: Press this button to enter into the on-screen menu (OSD).
5 −/+ (Minus/Plus): Use these buttons to navigate down and up in the
on-screen menu.
6 ENTER: Press this button to conrm the selection.
Note:
Pressing '−' (MINUS) and ENTER simultaneously will immediately switch
the output resolution of the device to 720p60.
Pressing '+' (PLUS) and ENTER simultaneously will immediately switch the
output resolution of the device to XGA.
9
6.2 Rear Panel
DVI OUT DVI PC SV CV
SERVICE
RS232
RLR/LTUO R/L
IN
DC 5V
1
3 5 6
2 4
1 SERVICE: Reserved for manufacturer use only.
2 RS-232: Connect to a PC or RS-232 control system to control the
device with RS232 commands (see Sectionsm 6.5 and 6.6 for details).
3 DVI OUTPUT:
Connect to a DVI display (TV/monitor) for PC signal output or to an
HDMI display with an HDMI to DVI adaptor.
4 L/R OUT (3.5 mm mini-jack output): Connect to an amplier or
active speaker for audio output in analogue stereo.
5 IN (Inputs):
DVI: Connect to DVI source such as PC or Laptop or to a HDMI source
with a HDMI to DVI adaptor.
L/R: Connect to a source device's analogue (L/R) output with a 3.5 mm
mini-jack cable.
PC: Connect to a PC or Laptop with a D-Sub 15pin cable.
CV + L/R: Connect to a source device such as video/DVD player for
both video and audio.
SV + L/R: Connect to a source device such as video/DVD player for
both S-Video and audio.
6 DC 5V: Connect the 5 V DC power supply to the device and plug the
adaptor into an AC wall outlet.
10
6.3 Remote Control
1 POWER:
Press this button to switch the
device ON or to put the device into
standby mode
2 CV/SV/PC/DVI:
Press to directly select the required
input.
3 EXIT:
Press this button to exit the menu
or the current selection in the on-
screen menu.
4 MENU:
Press this button to enter the on-
screen menu.
5 RESET:
Press this button to return the
device to the factory default
settings.
6 AUTO ADJUST:
Press the button to optimize the
positioning of the picture (picture
centering) on the screen.
7 OK & :
Press OK to conrm the selection or use the directional buttons to
navigate the on-screen menus.
CR-118
POWER
CV
SV
PC
EXIT MENU
OK
RESET AUTO
ADJUST
DVI
1
2
4
6
7
3
5
Otros manuales para CP-255ID
2
Tabla de contenidos
Otros manuales de Convertidor de medios de CYP
CYP
CYP CP-290 Manual de usuario
CYP
CYP CPRO-2E4KS Manual de usuario
CYP
CYP n-TECH SOLUTIONS nT15BX02/CLUX-11CD Manual de usuario
CYP
CYP CV-400H Manual de usuario
CYP
CYP DCT-3A Manual de usuario
CYP
CYP CLUX-SDI2HCA Manual de usuario
CYP
CYP CH-507RXWP Manual de usuario
CYP
CYP CETH-4HDI Manual de usuario
CYP
CYP AU-11HB Manual de usuario
CYP
CYP DCT-1 Manual de usuario
CYP
CYP CDPS-41SQ Manual de usuario
CYP
CYP AU-D250 Manual de usuario
CYP
CYP AU-D1 Manual de usuario
CYP
CYP CH-322 Manual de usuario
CYP
CYP CV-401H Manual de usuario
CYP
CYP DCT-9DD Manual de usuario
CYP
CYP AU-D6-H Manual de usuario
CYP
CYP DCT-1 Manual de usuario
CYP
CYP CS-802D Manual de usuario
CYP
CYP DCT-4 Manual de usuario
