CYP AU-D250 Manual de usuario

AU-D250

Advanced DAC with HDMI Bypass

and Audio Breakout

OPERATION MANUAL

Safety Precautions

Please read all instructions before attempting to unpack or install or

operate this equipment, and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

 Always follow basic safety precautions to reduce the risk of

re, electrical shock and injury to persons.

 To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

 Never spill liquid of any kind on or into this product.

 Never push an object of any kind into this product through

module openings or empty slots, as you may damage parts.

 Do not attach the power supply cabling to building surfaces.

 Do not allow anything to rest on the power cabling or allow it to

be abused by persons walking on it.

 To protect the equipment from overheating, do not block the

slots and openings in the module housing that provide ventilation.

Revision History

Version No Date Summary of Change

RDV1 20110701 Preliminary Release

RDV2 20120116

DRAFT

Table of Contents

1.Introduction.......................................................................1

2.Applications......................................................................1

3.Package Contents ...........................................................1

4.System Requirements.......................................................1

5. Features............................................................................2

6. Specications ..................................................................2

7. Operation Controls and Functions.................................3

7.1 Front Panel..................................................................3

7.2 Rear Panel ..................................................................4

7.3 Top Panel ....................................................................5

8. Remote Control................................................................5

9. OSD MENU ........................................................................6

10. Connection and Installation.........................................7

DRAFT

1.Introduction

The HD Audio Center is an excellent device for converting digital and analog

sources. This device allows for simultaneous conversion of a digital or an

analog audio input to all digital and analog audio outputs. Featuring a

sampling rate converter to 44.1KHz ~ 192KHz (up to 24 bits) output this device

also supports 2CH PCM audio, HDMI™, USB Audio 2.0, Optical and Coaxial

digital input/output. For professionals the Ti TPA6120A2 headphone amplier,

XLR (Low noise Professional Balance) and 6.3mm headphone jack offer

unparalleled audio quality yet, still have access to traditional 3.5mm (RCA

input/output) headphone jack. With a highly accurate PLL and low jitter

reduction clock system and an OLED display/IR remote for controlling the

device the HD Audio Center is an incredibly useful tool .for getting the most

out of your audio devices.

2.Applications

• Audio format conversion and sampling upgrade

• Professional audio

• PC audio onto professional speakers/headphone

• Analog to digital or digital to analog audio conversion

3.Package Contents

• HD Audio Center

• Remote Control x 1 (with battery)

• 6.5mm to 3.5mm phone jack adaptor

• 5V / 3.6A DC Power adaptor

• Operation Manual

4.System Requirements

Input source equipment such as PC or DVD player with connection cables

and output amplier or headphone with connection cables.

DRAFT

5. Features

Digital

• Support 2 Channels PCM HDMI, USB Audio 2.0, Optical, and Coaxial digital

interface input / output

• All digital interface sampling rate up to 192KHz, and resolution up to 24Bits

• All digital interface can be SRC(Sampling Rate Converter) to 44.1KHz,

48KHz, 88.2KHz, 96KHz, 176.4KHz or 192KHz output

• High accurate PLL and low Jitter reduction clock system

Analog

• Built-in Ti TPA6120A2 high quality headphone amplier, and 6.3mm Phone

jack output

• Support Low noise Professional Balance-XLR and RCA analog stereo output

• Support RCA and 3.5mm phone-jack analog input, sampling up to 192KHz

• Total harmonic distortion or less than 100dB

MISC

• Support IR control

• High viewing angle OLED Display

6. Specications

Input Ports 1xHDMI,1xUSB, 1xCoaxial, 1xOptical, 1xR/L & 1xLine-in

Output Ports 1xHDMI,1xUSB, 1xCoaxial, 1xOptical, 1xR/L & 1xXLR,

1x6.3mm headphone jack

HDMI Video Bypass

Digital Audio Input/Output PCM 2CH

Stereo Input/Output Level 2Vrms

Stereo XLR Input/Output level 4Vrms

Headphone Impedance 16Ω ~ 600Ω

ESD Protection Human body model: ± 8kV (air-gap discharge)

± 6kV(contact discharge)

Power Supply 5V DC/3.6A (US/EU standards, CE/FCC/UL certied)

Dimensions (mm) 138 (W) x 223 (D) x 50 (H)

Weight (g) 680

Chassis Material Aluminum

Silkscreen Color Black

Power Consumption 15W

DRAFT

7. Operation Controls and Functions

7.1 Front Panel

1 2 3 4 5

①.6.5mm Phone Jack: This slot is to connect with 6.5mm professional

headphone set for user to enjoy the individual professional audio sound.

②.3.5mm Front IN: This slot is to connect with 3.5Ø phone jack cable from

any audio equipment for stereo input audio signal.

③.IR: This is the IR receiver window that accept IR signal from the remote

control of this device that is included in the package.

④.OLED : This OLED displays the in/output selection with volume setting,

sampling rate and audio channels.

A B

C D

A. Input Source

B. Headphone Volume

C. Input sample-rate

D. Output sample-rate

⑤.Menu & Volume controller: Press this button to enter into the menu

selection and turn it to select the desire seeting, press it again to conrm

the selection. Out from the menu selection turn it to adjust the volume.

5. Features

Digital

• Support 2 Channels PCM HDMI, USB Audio 2.0, Optical, and Coaxial digital

interface input / output

• All digital interface sampling rate up to 192KHz, and resolution up to 24Bits

• All digital interface can be SRC(Sampling Rate Converter) to 44.1KHz,

48KHz, 88.2KHz, 96KHz, 176.4KHz or 192KHz output

• High accurate PLL and low Jitter reduction clock system

Analog

• Built-in Ti TPA6120A2 high quality headphone amplier, and 6.3mm Phone

jack output

• Support Low noise Professional Balance-XLR and RCA analog stereo output

• Support RCA and 3.5mm phone-jack analog input, sampling up to 192KHz

• Total harmonic distortion or less than 100dB

MISC

• Support IR control

• High viewing angle OLED Display

6. Specications

Input Ports 1xHDMI,1xUSB, 1xCoaxial, 1xOptical, 1xR/L & 1xLine-in

Output Ports 1xHDMI,1xUSB, 1xCoaxial, 1xOptical, 1xR/L & 1xXLR,

1x6.3mm headphone jack

HDMI Video Bypass

Digital Audio Input/Output PCM 2CH

Stereo Input/Output Level 2Vrms

Stereo XLR Input/Output level 4Vrms

Headphone Impedance 16Ω ~ 600Ω

ESD Protection Human body model: ± 8kV (air-gap discharge)

± 6kV(contact discharge)

Power Supply 5V DC/3.6A (US/EU standards, CE/FCC/UL certied)

Dimensions (mm) 138 (W) x 223 (D) x 50 (H)

Weight (g) 680

Chassis Material Aluminum

Silkscreen Color Black

Power Consumption 15W

DRAFT

7.2 Rear Panel

1 2 3 5 6 74

①.DC 5V: This slot is to connect the power adaptor included in the

package and connected from the AC wall outlet for power supply.

②.HDMI IN/OUT: These slots are to connect with HDMI input source

equipment such as DVD/ Blu-ray player with HDMI signal sending and

output to HDTV/monitor for output image display with HDMI cables.

③.USB: This slot is to connect with PC/MAC source equipment for USB audio

signal input sending.

④.COAXOUT/IN: These slots are to connect with input source equipment

such as Set-Top-Box or PS3 for input audio signal sending and output to

amplier or active speaker with coaxial cable.

⑤.OPT. OUT/IN: These slots are to connect with input source equipment

such as DVD/Blu-ray player for input audio signal sending and output to

amplier or active speaker with optical cable.

⑥.L/R IN/OUT: These slots are to connect with input source equipment such

as Set-Top-Box or PS3 for input audio signal sending and output to

amplier or active speaker with RCA jack cable.

⑦.R/L XLR OUT(Balance): These slots are to connect with balance amplier

or directly to professional balance equipment with XLR cables

DRAFT

7.3 Top Panel

①.Power button & LED: Press this button to switch on the device or set it to

standby mode. The red LED will illuminate when the device is connected

with power supply and will turn green if turn on the device.

②.MUTE button: Press this button to mute or unmute the audio volume

instantly.

8. Remote Control

1. POWER: Press this button to turn On or to set

the device in standby mode.

2. MUTE: press this button to mute or unmute

the audio volume instantly.

3. VOL. Up/Down: Press these buttons to turn

up or down on the output audio volume.

4. MENU: Press these button to enter into

the menu selections then press the up/

down buttons to select and press it again to

conrm the selection.

5. RETURN: Press this button to return or exit the

menu selection.

6. INPUT: Press these hot keys to switch the

input sources instantly.

DRAFT

9. OSD MENU

1st Layer 2nd Layer

Source Selection HDMI In

USB In

Optical In

Coaxial In

Line In

Front In

Return

SRC Set Bypass

192 KHz

176.4 KHz

96 KHz

88.2 KHz

48KHz

44.1 KHz

Return

HDMI TX Set Bypass

Input

Return

Display Set TimeOut 5s

TimeOut 10s

TimeOut 15s

Return

HP Impedance 16Ω

32Ω

64Ω

200Ω

300Ω

600Ω

Return

Reset to Default OK

Return

DRAFT

10. Connection and Installation

Otros manuales para AU-D250

Tabla de contenidos

Otros manuales de Convertidor de medios de CYP

Manuales populares de Convertidor de medios de otras marcas

SoundTraxx

SoundTraxx Blunami BLU-2200 Manual de usuario

SPROLINK

SPROLINK VA1 Manual de usuario

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manual de usuario

Nikon

Nikon AF-S TC-20E III Manual de usuario

Axis

Axis AXIS Q7406 Manual de usuario

Omega

Omega TAC80B-J Manual de usuario

Zoom

Zoom Thunderbolt TAC-2R Manual de usuario

OST

OST iConverter 10/100M Manual de usuario

Vertiv

Vertiv Netsure Manual de usuario

birddog

birddog MINI Manual de usuario

Roland

Roland GI-10 Manual de usuario

Wallenstein

Wallenstein WX310 Manual de usuario

Pace

Pace MSS 200-1 Manual de usuario

Solar Converters

Solar Converters EQ 12/24-50 Manual de usuario

TIE

TIE MIDI 1i1o Manual de usuario

DCS

DCS Vivaldi Upsampler Manual de usuario

Westermo

Westermo MCW-211 SERIES Manual de usuario

Expert

Expert EX-9543 Manual de usuario