CyberPower PR1500 Manual de usuario



User’s Manual

Professional Rack Mount UPS

PR1500 / PR2200



K01-1500S0A-04

1



TABLE OF CONTENTS

IMPORTANTSAFETYWARNINGS .......................................................................................................2

UNPACKING ......................................................................................................................................... 2

HARDWAREINSTALLATIONGUIDE.......................................................................................................2

BASICOPERATION ............................................................................................................................3

FRONTPANELDESCRIPTION ................................................................................................................3

REARPANELDESCRIPTION ................................................................................................................... 5

BATTERYREPLACEMENT ...................................................................................................................7

BATTERYREPLACEMENTPROCEDURE: ................................................................................................8

DEFINITIONSFORLEDINDICATORS...................................................................................................9

TROUBLESHOOTING .......................................................................................................................10

TECHNICALSPECIFICATIONS ...........................................................................................................11

PRODUCTREGISTRATION ................................................................................................................12

1YEARLIMITEDWARRANTY ........................................................................................................... 12

CONFORMANCEAPPROVALS ..........................................................................................................15

Thank you for purchasing a CyberPower Systems Product. To enjoy all the

features and benefits of this Uninterruptible Power System (UPS), please

read and follow all installation and operation instructions completely. This

UPS is designed to provide guaranteed power protection for connected

electronic equipment. The accompanying PowerPanel Business Edition

software saves data, closes open applications and automatically shuts

down your computer system in an intelligent and orderly manner.



2



Important safety warnings

This manual contains important instructions that should be followed during

installation and maintenance of the UPS and batteries. Please read and follow all

instructions carefully during installation and operation of the unit. Read this

manual thoroughly before attempting to unpack, install, or operate.

CAUTION! The UPS must be connected to an AC power outlet with fuse or

circuit breaker protection. DO NOT plug the machine into an outlet that is not

grounded. If you need to de-energize this equipment, turn off and unplug the UPS.

CAUTION! DO NOT USE FOR MEDICAL OR LIFE SUPPORT

EQUIPMENT! CyberPower Systems does not sell products for life support or

medical applications. DO NOT use in any circumstance that would affect

operation or safety of any life support equipment, with any medical applications, or

patient care.

CAUTION! The battery can energize hazardous live parts inside even when

the AC input power is disconnected.

CAUTION! To prevent the risk of fire or electric shock, install in a temperature

and humidity controlled indoor area, free of conductive contaminants. (Please see

specifications for acceptable temperature and humidity range).

CAUTION! To reduce the risk of electric shock, do not remove the cover,

except to service the battery. No user serviceable parts inside, except for the

battery.

CAUTION! To avoid electrical shock, turn off the unit and unplug it from the AC

power source before servicing the battery or installing a computer component.

CAUTION! DO NOT USE WITH OR NEAR AQUARIUMS! To reduce the risk of

fire, do not use with or near aquariums. Condensation from the aquarium can

come in contact with metal current contacts and cause the machine to short out.

CAUTION! DO NOT USE WITH LASER PRINTERS! The power demands of

laser printers are too large for a UPS.

UNPACKING

Inspect the UPS upon receipt. The box should contain the following:

UPS Unit; (1) User’s Manual for UPS; (2) Rack mount Brackets; (2) Stands; (1)

Telephone Cable (1) PowerPanel Business Edition Software CD; (1) User’s

Manual; (2) Serial Interface Cable (DB-9); (1) Serial-to-USB cable; (1) Warranty

Registration Card.

HARDWARE INSTALLATION GUIDE

1. Your new UPS may be used immediately upon receipt. However, recharging

the battery for at least four hours is recommended to insure that the

battery’s maximum charge capacity is achieved. Charge loss may occur

during shipping and storage. To recharge the battery, simply leave the unit

plugged into an AC outlet. The unit will charge in both the on as well as the off

position.

2. If you wish to use the software, connect the enclosed serial interface cable to

the serial port on the UPS and an open serial port on the computer. If you

would like to use USB interface, please connect the USB adapter with the

3



Serial Cable then connect the USB to your computer.

3. With the UPS unit off and unplugged, connect your computer, monitor, and

any externally powered data storage device (Zip drive, Jazz drive, Tape drive,

etc…) into the battery power supplied outlets. DO NOT plug a laser printer,

copier, space heater, vacuum, paper shredder or other large electrical device

into the UPS. The power demands of these devices will overload and possibly

damage the unit.

4. To protect a fax, telephone, modem line or network cable, connect a

telephone cable or network cable from the wall jack outlet to the IN jack of the

UPS. Then connect a telephone cable or network cable from the OUT jack on

the UPS to the modem, computer, telephone, fax machine, or network device.

5. Plug the UPS into a 2 pole, 3 wire grounding receptacle (wall outlet). Make

sure the wall branch outlet is protected by a fuse or circuit breaker and does

not service equipment with large electrical demands (e.g. refrigerator, copier,

etc…). Avoid using extension cords. If used, the extension cord must be rated

for 15 Amps.

6. Depress the power switch to turn the unit on. The power on indicator light will

illuminate. If an overload is detected, an audible alarm will sound and the unit

will emit one long beep. To correct this, turn the UPS off and unplug at least

one piece of equipment from the battery power supplied outlets. Wait 10

seconds. Make sure the circuit breaker is depressed and then turn the UPS

on.

7. If an overload is detected, an audible alarm will sound and the unit will emit

one long beep. To correct this, turn the UPS off, unplug at least one piece of

equipment, wait 10 seconds, check to make sure that the circuit breakers are

depressed, and turn the unit on.

8. Your UPS is equipped with an auto-charge feature. When the UPS is plugged

into an AC outlet, the battery will automatically recharge.

9. To maintain optimal battery charge, leave the UPS plugged into an AC outlet

at all times.

10. To store your UPS for an extended period, cover it and store with the battery

fully charged. Recharge the battery every three months to insure battery life.

Basic operation

FRONT PANEL DESCRIPTION

Power Switch

Press the power button to turn the UPS ON or OFF

4



Test Switch

Professional Rack Mount UPS performs a self-test automatically. When

powered on. When the UPS passes the test, it returns to on-line

operation. If the UPS fails the self-test, please recharge the battery for

hours and perform another self-test. If it fails after recharging the battery,

please replace the battery.

Wiring Fault Indicator

This LED will illuminate to warn the user that a wiring

problem exists within the AC receptacle, such as a

bad ground, miss ground or reversed wiring. If

illuminated, disconnect all equipment and contact an

electrician to insure outlet is properly wired.

Battery Indicator

This illuminates during utility failure, indicating that the

battery is supplying power to the battery-power

supplied outlets.

AVR Indicator

This LED indicates that the UPS is operating in automatic

voltage regulation mode. When the LED is illuminated

continuously, it indicates input over-voltage and the UPS

unit bucks the voltage. When the LED is flashed in

rotation, it indicates that the UPS unit boosts input voltage.

Power On Indicator

This LED is illuminated when the utility condition is

normal and the UPS outlets are providing “clean power”,

free of surges and spikes.

Battery Indicators

This indicator shows a visual indication of the battery charge. If

battery capacity is under 20%, no indicator LED will illuminate and

UPS starts beeping.

Load Level Indicators

This indicator shows a visual induction of the UPS load. The load

indicator LED will turn orange if the load is between 80 and 100%.

If the load is under 20%, no indicator LED will illuminate.

5



REAR PANEL DESCRIPTION

USB Port

Through USB communication port to manage software

Circuit Breaker Reset for Overload Protection

Resettable circuit breakers provide optimal overload protection.

Battery Backup and surge Protection Outlets

The UPS provides four battery powered,

surge protected and AVR outlets for

connected equipment and insures temporary

uninterrupted operation of connected

equipment during a power failure.

Individual Backup Power for Critical Load

The UPS provides two battery powered, surge

protected and AVR outlets for the most critical

connected equipment and insures temporary

uninterrupted operation of connected

equipment during a power failure.

NOTE: When the UPS is overloaded, two circuit breakers will be tripped to

interrupt power supply to the four battery outlets and leaves the two outlets

for critical loads uninterrupted.

Communication Protection Ports (RJ11/RJ45)

Ports protect standard modem, fax, telephone line or network

cable.

6



Dual Serial Ports

Professional Rack Mount UPS provides two serial ports

to allow connection and communication between the

UPS and two computers. This allows the simultaneous

shutdown of two computer systems. The Primary

computer (with PowerPanel Business Edition installed) is the computer that you

will use to control the UPS and make any changes to the operation of the UPS.

The Secondary computer (with PowerPanel™ software installed) is unable to

exhibit any control over the UPS. When there is a power failure, the Primary

computer will start to shutdown after a user controlled delay. Once the Primary

computer is shutdown, the UPS will signal the secondary computer and initiate a

shutdown. The secondary computer will then shutdown. Once the secondary

computer has completed its shutdown, the UPS will power off. Both PowerPanel

Business Edition and PowerPanel™ will save and close any open files prior to

shutting the system down.

Please go to www.cyberpowersystems.com for free download PowerPanel®

Software

7



Battery replacement

Contact your dealer or call the number in this manual for information on battery

replacement. The order numbers for the battery are BA-PR1500 for PR1500;

BA-PR2200 for PR2200 Read and follow the IMPORTANT SAFETY

INSTRUCTIONS before servicing the battery. Service the battery under the

supervision of personnel knowledgeable of batteries and their precautions.

Servicing the battery can only be performed by trained personnel.

CAUTION! Use only the specified type of battery. See your dealer for replacement

batteries.

CAUTION! The battery may present the risk of electrical shock. Do not dispose of

batteries in a fire, as they may explode. Follow all local ordinances regarding

proper disposal of batteries.

CAUTION! Do not open or mutilate the batteries. Release electrolyte is harmful to

the skin and eyes and may be toxic.

CAUTION! A battery can present a high risk of short circuit current and electrical

shock.

Take the following precautions before replacing the battery:

1. Remove all watches, rings or other metal objects.

2. Only use tools with insulated handles.

3. Do not lay tools or metal parts on top of battery or any terminals.

4. Wear rubber gloves and boots.

5. Determine if the battery is inadvertently grounded.

If inadvertently grounded, remove source of ground. CONTACT WITH

GROUNDED BATTERY CAN RESULT IN ELECTRICAL SHOCK! The likelihood

of such shock will be reduced if such grounds are removed during installation and

maintenance (applicable to a UPS and a remote battery supply not having a

grounded circuit).

8



BATTERY REPLACEMENT PROCEDURE:

Remove the right side

front panel.

Remove the two retaining screws of

the cable protection cover then

remove the cover.



Disconnect the black and

red cable.

Remove the four retaining screws.

*Pull the battery pack out from the unit.

*Slide a new battery pack into the unit.

Assemble the screws, cover, cable and front

panel in the reverse sequence of above steps.

*Recharge the unit for 4-8 hours to ensure the

UPS performs expected runtime.

9



Definitions for led indicators

Power

Wiring

Fault

AVR

Using

Battery

Circuit

Breaker

Alarm

Condition

On Off Off Off Set Off Normal

Off

Flash

Off

Set

Off

AVR- Max. boost 15% of input

voltage for output regulation while

input voltage is from 8% to 30%

under nominal.

Off

Set

Off AVR- Max. buck 15% of input

voltage for output regulation while

input voltage is from 8% to 26%

over nominal.

Off

On/Off

Off

Set

Two

beeps

Utility Failure- The UPS is

providing battery power to the

Battery-Power Supplied outlets.

Off

Set

Rapid

beeps

Utility Failure- The UPS is

providing battery

power.Rapid beeps indicate the

battery will run out of charge

within a few minutes.

On/off

On/off/

On/off

flash

On/off

Set

Long

beeps

Overload- Turn the UPS off and

unplug at least one piece of

equipment from the UPS. Wait 5

seconds, reset the circuit breaker

and restart the UPS.

Off

Long

beep

Overload- Turn the UPS off and

unplug at least one piece of

equipment from the UPS. Wait 5

seconds, reset the circuit breaker

and restart the UPS.

On/Of

On/Off

Flash

Off

Set

Weak Battery- Recharge the

battery for at least 8 hours. If

Check Battery is illuminated,

contact CyberPower Systems

for battery replacement

information.

On/Of

On/Off

Flash

Off

Set

Weak Battery- Recharge the

battery for at least 8 hours. If

Check Battery is illuminated,

contact CyberPower Systems

for battery replacement

information.

On/Of

On/Off

Flash

Off

Set

Weak Battery- Recharge the

battery for at least 8 hours. If

Check Battery is illuminated,

contact CyberPower Systems for

battery replacement information.

Otros manuales para PR1500

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Unión Postal Universal de CyberPower

CyberPower

CyberPower Smart App Sinewave Series Manual de usuario

CyberPower

CyberPower CyberShield CSN75A12V3 Manual de usuario

CyberPower

CyberPower 649532010004 Manual de usuario

CyberPower

CyberPower RT650EI Manual de usuario

CyberPower

CyberPower CPS1500AVR Manual de usuario

CyberPower

CyberPower 6K On-Line series Manual de usuario

CyberPower

CyberPower CPS700AVR Manual de usuario

CyberPower

CyberPower SM20KPM Manual de usuario

CyberPower

CyberPower CP685AVR Manual de usuario

CyberPower

CyberPower BU600ELCD Manual de usuario

CyberPower

CyberPower CST1300AL Manual de usuario

CyberPower

CyberPower BU600E Manual de usuario

CyberPower

CyberPower AVR Series Manual de usuario

CyberPower

CyberPower PR750LCDN Manual de usuario

CyberPower

CyberPower CST1300AL Manual de usuario

CyberPower

CyberPower OR1000LCDRM1Ua Manual de usuario

CyberPower

CyberPower 649532210046 Manual de usuario

CyberPower

CyberPower UP425 Manual de usuario

CyberPower

CyberPower BPSE240V75ART3UOA Manual de usuario

CyberPower

CyberPower AVR Series Manual de usuario

CyberPower

CyberPower 649532010066 Manual de usuario

CyberPower

CyberPower CSN75A12V3-G Manual de usuario

CyberPower

CyberPower Value 600EI Manual de usuario

CyberPower

CyberPower 649532715008 Manual de usuario

Manuales populares de Unión Postal Universal de otras marcas

Pylontech

Pylontech Victron & Pylontech US5000 Manual de usuario

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Manual de usuario

Mecer

Mecer ME-1000-WTU Manual de usuario

Mustek

Mustek PowerMust 530(B) Plus Manual de instalación y operación

Emerson

Emerson Liebert NXL series Manual de usuario

MAKELSAN

MAKELSAN BOXER SERIES Manual de usuario

Block

Block PC-0524-400-0 Manual de usuario

Eaton

Eaton 3S Instrucciones de montaje

Best Power

Best Power 610 Manual de usuario

Best Power

Best Power Unity/I UT3K Manual de usuario

Mustek

Mustek PowerMust 400 Offline Manual de usuario

Xantrex

Xantrex Trace 512 UR-UPS Manual de usuario

Forza

Forza SL-1501UL Manual de usuario

LEGRAND

LEGRAND keor 310081 Manual de usuario

ABB

ABB Conceptpower DPA 500 Manual de usuario

ZincFive

ZincFive BC Series Manual de usuario

BPC

BPC 1.5K SMART Manual de usuario

IBM

IBM 5595-1AX Manual de usuario