Curt Manufacturing 56218 Manual de usuario

Otros manuales de Accesorios para automóviles de Curt Manufacturing

Curt Manufacturing

Curt Manufacturing 11435 Manual de usuario

Curt Manufacturing

Curt Manufacturing 4516 Manual de usuario

Curt Manufacturing

Curt Manufacturing 18100 Manual de usuario

Curt Manufacturing

Curt Manufacturing 12170 Manual de usuario

Curt Manufacturing

Curt Manufacturing 11065 Manual de usuario

Curt Manufacturing

Curt Manufacturing DISCOVERY Manual de usuario

Curt Manufacturing

Curt Manufacturing 45950 Manual de usuario

Curt Manufacturing

Curt Manufacturing A25 Manual de usuario

Curt Manufacturing

Curt Manufacturing 12070 Manual de usuario

Curt Manufacturing

Curt Manufacturing 13434 Manual de usuario

Curt Manufacturing

Curt Manufacturing 11419 Manual de usuario

Curt Manufacturing

Curt Manufacturing 70108 Manual de usuario

Curt Manufacturing

Curt Manufacturing 16320 Manual de usuario

Curt Manufacturing

Curt Manufacturing 58963 Manual de usuario

Curt Manufacturing

Curt Manufacturing 18035 Manual de usuario

Curt Manufacturing

Curt Manufacturing 70103 Manual de usuario

Curt Manufacturing

Curt Manufacturing 31048 Manual de usuario

Curt Manufacturing

Curt Manufacturing Rebellion XD Manual de usuario

Curt Manufacturing

Curt Manufacturing 51451 Manual de usuario

Curt Manufacturing

Curt Manufacturing 111395 Manual de usuario

Curt Manufacturing

Curt Manufacturing LIPPERT 18109 Manual de usuario

Curt Manufacturing

Curt Manufacturing 56165 Manual de usuario

Curt Manufacturing

Curt Manufacturing RockerBall 40047 Manual de usuario

Curt Manufacturing

Curt Manufacturing CM18153 Manual de usuario

Manuales populares de Accesorios para automóviles de otras marcas

James Baroud

James Baroud Odyssey Manual de usuario

Motorola

Motorola i50sx Manual de usuario

Yakima

Yakima 9MM STANDARD BIKE MOUNT Manual de usuario

Feniex

Feniex T3 Manual de usuario

Renault

Renault 77 11 423 180 Manual de usuario

Kia

Kia E8300-4D000 Manual de usuario

Brink

Brink 756843 Manual de usuario

Whispbar

Whispbar K085W Manual de usuario

v.link

v.link CI-VL2-PC-HSD Manual de usuario

Viking

Viking Stack-Rack Guía de configuración rápida

Aries

Aries 203015 Manual de usuario

Choetech

Choetech AT0005 Manual de usuario

ZZ2

ZZ2 ZZAIR-PRO Manual de usuario

Holman

Holman 4A80L Manual de usuario

Thule

Thule 2075 Manual de usuario

Motorola

Motorola T325 Manual de usuario

TAUBENREUTHER

TAUBENREUTHER 16-3950 Guía de instalación

DV8

DV8 FBJL-02 Manual de usuario

01/30/2014

56218

FORD TRANSIT CONNECT 1. Access the vehicle’s wiring harness connectors in

the cargo area behind the taillight at positions S3 and

S4 as shown in the Wiring Location Guide.

2. Locate vehicle’s battery on the driver’s side under

the hood and disconnect the negative battery terminal.

3. Open the rear cargo doors (A). Remove the scuff

panel by pulling upwards (B).

4. Starting on the driver’s side remove the plastic

access cover to locate the vehicle's taillight wiring

harness (C). Locate the taillight connectors which will

be similar to those on the T-Connector. Separate the

connector from the taillight housing taking care not to

damage the locking tabs (D). Insert the T-Connector

end with the yellow wire between the separated

connectors. Make sure the connectors are fully inserted

with locking tabs in place (E).

WARNING!

Verify miscellaneous items that may be hidden behind

or under any surface before drilling to avoid damage

and/or personal injury.

5. Locate a suitable grounding point such as an

existing screw with nut in the vehicle’s frame or drill a

3/32” pilot hole for the provided screw. Clean the

ground area of rust and dirt. Secure the white ground

wire using the ring terminal and screw provided.

6. Inside the vehicle on the driver’s side, locate a ﬂat

spot and adhere the black converter box using the

double-sided tape provided (F).

7. Route the T-Connector end with the green wire to

the passenger side behind the removed scuff panel.

Repeat Step 4 on the passenger’s side using the

T-Connector end with the green wire (G,H,I). Use the

provided cable ties to secure any loose wires.

8. Route the black power wire from the vehicle’s

battery as shown in the CME-PCL-INC sheet (included).

9. Route the 4-ﬂat to the center of the vehicle when in

use. When not in use roll up and store in a convenient,

out of the way location.

10. Reinstall all items removed during install.

IMPORTANT!

The battery connection must be fuse protected, 10

amp max. Exceeding the product rating can cause

loss of warranty, overheating and potential ﬁre. Do

not exceed the tow vehicle’s lamp load rating or

the product rating, whichever is lower:

Signal Circuits - 3.0 amps per side

Tail/Running Circuits - 6.0 amps total

Check vehicle owner’s manual or contact the

vehicle manufacturer for more information.

11. Connect negative battery terminal.

INSTALLATION QUESTIONS? CALL TECHNICAL SUPPORT AT 1-800-798-0813

S4

S3

PACKAGE CONTENTS

4-FLAT OEM TYPE REPLACEMENT W/INSTALL KIT