Crystal Vision Indigo CoolFlow MON210 Manual de usuario

MON210

SDI to composite or Y/C monitoring

encoder

Crystal Vision Ltd., Lion Technology Park, Station Road East, Whittlesford, Cambridge, CB22 4WL, England.

Tel: +44(0) 1223 497049 Fax: +44(0) 1223 497059 sales@crystalvision.tv www.crystalvision.tv

Crystal Vision MON210 User Manual

Contents

1 Introduction 2

2 Card edge operation 4

3 Hardware installation 6

3.1 Universal rear connectors 6

Rear module connections with RM01 6

Rear module connections with RM18 7

Rear module connections with RM02 8

3.2 General purpose interface 8

2U frame GPI Connections 9

1U frame GPI connections 10

DTB GPI connections 10

3.3 Configuration 10

Changing the standard selection mode 11

Changing output signal formats 11

4 Problem solving 13

5 Specification 15

MON210 User Manual R2.10 1 20 November 2018

Crystal Vision Introduction

1 Introduction

The MON210 is an dual 8-bit Serial Digital to Analogue converter with up to four

selectable composite or Y/C analogue outputs and one fixed composite output per

converter channel.

The universal connection system allows a mixture of Crystal Vision modules in the frame.

The modules plug in the front and the rear connectors plug in the rear. Depending on

frame design, a hinged or removable front panel reveals LED indication of input and PSU

status when opened.

MON210 dual serial digital to analogue converter

The MON210 may be used with the RM01 single slot rear connector, the RM02

quadruple slot rear connector and the RM18 double slot rear connectors. The RM01

allows the highest frame packing density, with reduced output connections, whilst the

RM18 and RM02 provide access to more outputs but with reduced packing density. Only

the RM18 provides access to all outputs.

The RM01 allows 12 modules to fit in a 2U frame, the RM02 allows 9 modules to fit in a

2U frame and the RM18 allows 6 modules to fit in a 2U frame.

The analogue outputs can be switched between input video and an internal test pattern

under local or remote (GPI) control. It accepts either 625 or 525 line input, with automatic

detection.

MON210 User Manual R2.10 2 20 November 2018

Crystal Vision Introduction

The main features are:

•Dual 8-bit Serial Digital to Analogue Composite converter

•Variable gain

•Automatic equalisation for up to 200 metres of coaxial cable.

•One composite and up to four composite or two Y/C outputs per converter

channel

•GPI/LED input presence indication

•Auto or manual PAL 625/NTSC 525 line selection

•VBI blanked or unblanked

•Modulated ramp test pattern or serial input

•NTSC setup on/off and chroma bandwidth select

•Card edge control

MON210 User Manual R2.10 3 20 November 2018

Crystal Vision Card edge operation

2 Card edge operation

The front edge of the MON210 card provides power rail monitoring, signal status, gain

adjustment and configuration switches.

MON210 front edge view

The 8-way front edge switch provides access to the following:

•Test – set output as test pattern or SDI input, independently for channel A or B

•525 – force standard (if NOT in AUTO) independently for channel A or B

•VBI – blank or unblank VBI data, independently for channel A or B

•SET – apply 7.5 IRE in NTSC, for both channels 1 and 2 together

•BW – change chroma bandwidth, for both channels 1 and 2 together

Lever Up Down

TEST A

Composite output is incoming SDI data

Composite output is modulated ramp test pattern

525 A

625-line if manual selected on jumper PL8

525-line if manual selected on jumper PL8

VBI A Blank PAL lines 7 to 22 & 320 to 335,

NTSC lines 10 to 20 & 273 to 282

Unblank PAL lines 7 to 22 & 320 to 335, NTSC

lines 10 to 20 & 273 to 282.

SETUP No setup Adds 7.5 IRE of setup to Y & reduces Y gain as

required. Only affects 525-line output

Chroma Bandwidth 1.3MHz

Chroma Bandwidth 650kHz.

TEST B

Composite output is incoming SDI data

Composite output is modulated ramp test pattern

525 B

625-line if manual selected on jumper PL8

525-line if manual selected on jumper PL8

VBI B Blank PAL lines 7 to 22 & 320 to 335,

NTSC lines 10 to 20 & 273 to 282

Unblank PAL lines 7 to 22 & 320 to 335, NTSC

lines 10 to 20 & 273 to 282

MON210 User Manual R2.10 4 20 November 2018

Crystal Vision Card edge operation

LED indicator assignments

LED

Colour

Meaning when lit

INPUT A Green (bottom) Valid serial digital input detected channel A

ERROR A Red (top) Serial digital input lock error channel A

625 A Yellow (top) 625-line output channel A

525 A Yellow (bottom) 525-line output channel A

INPUT B Green (bottom) Valid serial digital input detected channel B

ERROR B Red (top) Serial digital input lock error channel B

625 B Yellow (top) 625-line output channel B

525 B Yellow (bottom) 525-line output channel B

PSU Green (top) Power supply voltage present

Cable equalisation

Cable equalisation is adjusted automatically for up to 200 meters of Belden 8281 or

equivalent.

Adjusting input gain

Gain is continuously variable by ±10% using the GAIN control. The MON210 is

supplied with a factory-set gain of 0dB.

On-board jumper link settings

Please refer to section 3.4 Configuration to set the following options when using card

edge control:

•Changing the standard selection – PL8,9 AUTO/Manual

•Changing the output selection – PL2, 3, 4 and 5

MON210 User Manual R2.10 5 20 November 2018

Crystal Vision Hardware installation

3 Hardware installation

The MON210 Dual Serial Digital to Analogue converter fits into all Crystal Vision rack

frames. All modules can be plugged in and removed while the frame is powered without

damage.

3.1 Universal rear connectors

When used with a single height rear connector, the 2U Indigo or FR2AV frame will house

up to 12 modules and dual power supplies, the 1U Indigo or FR1AV frame will house 6

modules and a single power supply. The 1U DeskTop Box has a built-in power supply

and will house up to 2 modules with a single height rear connector.

The 2U and 1U frames have a hinged front panel that gives access to the PSU and all

modules. The DeskTop Box has a removable front. The universal frame wiring system

allows any of the interface range of modules to be fitted in any position with the use of

removable rear modules.

The MON210 may be used with the RM01 single slot rear connector, the RM02

quadruple slot rear connector and the RM18 double slot rear connectors.

Rear module connections with RM01

RM01 fits in all frames Description

RM01

•12 modules in 2U, 6 in 1U &

2 in a DTB

•All frame slots can be used

BNC Connection

PAL/C(B) Channel B Composite or C (set by PL4)

SDI(A) IN Channel A Serial Digital Input

PAL/C(A) Channel A Composite Video or C (set by PL2)

PAL/Y(A) Channel A Composite Video or Y (set by PL3)

PAL/Y(B) Channel B Composite Video or Y (set by PL5)

SDI(B) IN Channel B Serial Digital Input

MON210 User Manual R2.10 6 20 November 2018

Crystal Vision Hardware installation

Rear module connections with RM18

RM18 fits in all frames

Description

RM18

•6 modules in 2U , 3 in 1U, 1 in a

DTB

•1 module per rear connector

•6 connections available

•Card fits in upper slot

•No card fits in lower slot

BNC Connection

SDI(A) IN Channel A Serial Digital Input

PAL/Y(A) Channel A Composite Video or Y (set by PL3)

PAL/C(A) Channel A Composite Video or C (set by PL2)

PAL/Y(B) Channel B Composite Video or Y (set by PL5)

PAL/C(B) Channel B Composite Video or C (set by PL4)

SDI(B) IN Channel B Serial Digital Input

PAL(A) Channel A Composite Video

PAL(B) Channel B Composite Video

Note:

Only the RM18 provides access to all outputs.

MON210 User Manual R2.10 7 20 November 2018

Crystal Vision Hardware installation

Rear module connections with RM02

RM02 fits in a 2U Indigo or FR2AV frame

Description

RM02

•9 modules per 2U frame

•3 modules per rear connector

•9 connections available

•Card 1 fits in slots 1, 5 and 9

•Card 2 fits in slots 2, 6 and 10

•Card 3 fits in slots 4, 8 and 12

•No card fits in 3, 7 or 11

BNC Connection

IN Channel A Serial Digital Input

1 Channel A Composite Video or C (set by PL2)

2 Channel A Composite Video or Y (set by PL3)

3 Channel A Composite Video or Y (set by PL3)

4 Channel B Composite Video or Y (set by PL5)

5 Channel B Composite Video or C (set by PL4)

6 Channel B Composite Video or C (set by PL4)

7 Channel A Composite Video or C (set by PL2)

8/IN2 Channel B Serial Digital Input

3.2 General purpose interface

The external GPI control lines 'a' to 'f' at the frame remote connectors may be used to

control the MON210 remotely with remote switches emulating some of the front panel

switches. The GPI lines are normally pulled up on-board to +5V via 10kΩ and will

withstand up to +35V.

MON210 User Manual R2.10 8 20 November 2018

Crystal Vision Hardware installation

GPI Connections

OPEN CONNECT TO GROUND

‘a’ Channel A 625-line if manual standard

selected on jumper PL8

Channel A 525-line if manual standard

selected on jumper PL8

‘b’ Blank channel A PAL lines 7 to 22 & 320 to

335, NTSC lines 10 to 20 & 273 to 282

Unblank channel A PAL lines 7 to 22 & 320

to 335, NTSC lines 10 to 20 & 273 to 282

‘c’ Channel B 625-line if manual standard

selected on jumper PL9

Channel B 525-line if manual standard

selected on jumper PL9

‘d’ Blank channel B PAL lines 7 to 22 & 320 to

335, NTSC lines 10 to 20 & 273 to 282

Unblank channel B PAL lines 7 to 22 & 320

to 335, NTSC lines 10 to 20 & 273 to 282

‘e’ Channel A input present Channel A input absent

‘f’ Channel B input present Channel B input absent

The following tables show the GPI pinout for each frame:

2U frame GPI Connections

GPI lines ‘a’ to ‘f’ of each card connect to one of four rear remote connectors as follows:

Slot no. ‘a’ pin ‘b’ pin ‘c’ pin ‘d’ pin ‘e’ pin ‘f’ pin

8 (1)

9 (1)

18 (1)

26 (1)

19 (2)

20 (2)

7 (1)

16 (1)

17 (1)

25 (1)

10 (2)

11 (2)

8 (3)

9 (3)

18 (3)

26 (3)

19 (4)

20 (4)

7 (3)

16 (3)

17 (3)

25 (3)

10 (4)

11 (4)

5 (1)

6 (1)

15 (1)

24 (1)

1 (2)

2 (2)

4 (1)

14 (1)

13 (1)

23 (1)

3 (2)

4 (2)

5 (3)

6 (3)

15 (3)

24 (3)

1 (4)

2 (4)

4 (3)

14 (3)

13 (3)

23 (3)

3 (4)

4 (4)

3 (1)

12 (1)

22 (1)

21 (1)

12 (2)

13 (2)

10 (1)

11 (1)

19 (1)

20 (1)

21 (2)

22 (2)

3 (3)

12 (3)

22 (3)

21 (3)

12 (4)

13 (4)

10 (3)

11 (3)

19 (3)

20 (3)

21 (4)

22 (4)

Table shows Pin number (Remote number)

Note:

Remote 1 and Remote 3 are 26 way high density ‘D’ type female sockets and frame

ground is pin 2 and +5V @500mA is pin 1 in each case.

Remote 2 and Remote 4 are 26 way high density ‘D’ type male plugs and frame ground is

pin 6 and +5V @500mA is pin 15 in each case.

MON210 User Manual R2.10 9 20 November 2018

Tabla de contenidos

Otros manuales de Convertidor de medios de Crystal Vision

Crystal Vision

Crystal Vision Indigo Q-Down-AG 3G Manual de usuario

Crystal Vision

Crystal Vision ADDEC-200 Manual de usuario

Crystal Vision

Crystal Vision ADDEC-100 Manual de usuario

Crystal Vision

Crystal Vision Indigo ADCA412 Manual de usuario

Crystal Vision

Crystal Vision Indigo Wallbox Q-Down Manual de usuario

Crystal Vision

Crystal Vision ARC102 Manual de usuario

Crystal Vision

Crystal Vision ShARC-XP Manual de usuario

Crystal Vision

Crystal Vision Up-and-down-AAFD Manual de usuario

Crystal Vision

Crystal Vision Up-and-down-S Manual de usuario

Crystal Vision

Crystal Vision ENDAC Manual de usuario

Crystal Vision

Crystal Vision Indigo ADDEC-210 Manual de usuario

Crystal Vision

Crystal Vision DDAA132P Manual de usuario

Crystal Vision

Crystal Vision Up-Down 3G Series Manual de usuario

Crystal Vision

Crystal Vision Vision 3 Manual de usuario

Crystal Vision

Crystal Vision UP-DOWN-VF Series Manual de usuario

Crystal Vision

Crystal Vision ADC104 Manual de usuario

Crystal Vision

Crystal Vision ARC-10MC Manual de usuario

Crystal Vision

Crystal Vision ENC116 Manual de usuario

Crystal Vision

Crystal Vision DDAA132 Manual de usuario

Crystal Vision

Crystal Vision Indigo Q-Down Mini Manual de usuario

Crystal Vision

Crystal Vision DEC103S Manual de usuario

Crystal Vision

Crystal Vision Indigo DACA214 Manual de usuario

Crystal Vision

Crystal Vision Dual DL-3G Manual de usuario

Crystal Vision

Crystal Vision DEC102S Manual de usuario

Manuales populares de Convertidor de medios de otras marcas

SoundTraxx

SoundTraxx Blunami BLU-2200 Manual de usuario

SPROLINK

SPROLINK VA1 Manual de usuario

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manual de usuario

Nikon

Nikon AF-S TC-20E III Manual de usuario

Axis

Axis AXIS Q7406 Manual de usuario

Omega

Omega TAC80B-J Manual de usuario

Zoom

Zoom Thunderbolt TAC-2R Manual de usuario

OST

OST iConverter 10/100M Manual de usuario

Vertiv

Vertiv Netsure Manual de usuario

birddog

birddog MINI Manual de usuario

Roland

Roland GI-10 Manual de usuario

Wallenstein

Wallenstein WX310 Manual de usuario

Pace

Pace MSS 200-1 Manual de usuario

Solar Converters

Solar Converters EQ 12/24-50 Manual de usuario

CYP

CYP EL-7400V Manual de usuario

TIE

TIE MIDI 1i1o Manual de usuario

DCS

DCS Vivaldi Upsampler Manual de usuario

Westermo

Westermo MCW-211 SERIES Manual de usuario