Crystal Vision Dual DL-3G Manual de usuario

Crystal Vision Ltd., Lion Technology Park, Station Road East, Whittlesford, Cambridge, CB22 4WL, England.

E-mail: [email protected] Website: www.crystalvision.tv Tel: +44(0) 1223 497049 Fax: +44(0) 1223 497059

Dual DL-3G

Dual channel dual link

to single link converter

Dual DL-3G User Manual R1.0 Crystal Vision

Dual DL-3G User Manual R1.0 126/11/2010

Contents

1Introduction 3

2Hardware installation 4

2.1Module configuration 4

2.2Rear modules and signal I/O 5

Rear module connections with RM50 5

3Card edge operation 6

3.1Card edge controls 6

3.2Card edge buttons 6

3.3Card edge rotary control 6

3.4Reading card edge LEDs 7

3.5Navigating card edge menus 7

3.6Card edge configuration 8

Menu tree 8

Status menu 9

Output level menu 10

4Using the front control panel 11

4.1Module selection 11

4.2The Dual DL-3G active panel menu structure 13

Active control panel menus 13

The Status menu 14

Output level menu 15

5Statesman 16

5.1Statesman operation 16

Dual DL-3G User Manual R1.0 Crystal Vision

Dual DL-3G User Manual R1.0 226/11/2010

Status 17

6Trouble shooting 18

Basic fault finding guide 19

7Specification 20

Crystal Vision Introduction

Dual DL-3G User Manual R1.0 326/11/2010

1 Introduction

The Dual DL-3G is a dual link to 3G converter for interfacing between 1080p dual link

and 3Gb/s equipment. It takes two 1.5Gb/s dual link signals or two separate co-timed HD

signals and combines them into a single 3Gb/s signal

The two co-timed HD signals could be the left and right pictures from an HD 3D

programme which come from a pair of cameras looking at the same scene. The Dual DL-

3G allows two 3D images to be combined and put down the same wire so they go the

same route and stay together

The Dual DL-3G can cope with a 12 sample timing difference between the links.

There are two independent channels on the board meaning two conversions can be

performed

The Dual DL-3G is designed mainly for use with Level B 3Gb/s signals. Although it will

work with Level A signals which do not contain audio or other embedded data.

The Dual DL-3G has user controllable selection of level A or B for its outputs and the

VPID status of the input video is indicated.

The Dual DL-3G card can be controlled by Statesman PC control software, active control

panel such as the REMIND-E, or from its card edge controls.

The main features of Dual DL-3G are:

Two independent 3G HD channels

VPID status indication

Board-edge, Statesman and GPI alarm indication

Space-saving: 100mm x 266mm module allowing 24 Dual DL-3G boards in 4U

Crystal Vision Hardware installation

Dual DL-3G User Manual R1.0 426/11/2010

2Hardware installation

The Dual DL-3G single height module is used with the RM50 rear connector, which will

fit into all Crystal Vision rack frames. All modules can be connected or removed while

the frame is powered, without damaging the board.

2.1 Module configuration



Dual DL-3G

Link configuration and LEDs

There are 5 jumper links and three surface-mounted LEDs on the Dual DL-3G. The

surface-mounted LEDs are not visible from the front of the frame and are included for

diagnostic purposes only.

Comment

J3-6 GPI control



422 comms 

PL8 1-2 (lower) selected IP address. 2-3 (upper) forced IP address 10-0-0-201

LED1 CPU configuration in progress

LED2 Ethernet Data

LED3 Ethernet Link

Note: Links J3-6 have been factory set and should not require reconfiguring.

Crystal Vision Hardware installation

Dual DL-3G User Manual R1.0 526/11/2010

2.2 Rear modules and signal I/O

The 4U Indigo 4 frame will house up to 24 single height modules with up to three power

supplies. The 2U Indigo 2 frame will house up to 12 single height modules and dual

power supplies. The 1U Indigo 1 frame will house 6 single height modules and a single

power supply. The Indigo DT desk top box has a built-in power supply and will house up

to two single height modules.

The rear module for the Dual DL-3G is the RM50 or RM34.

Note: For details of fitting rear connectors please refer to the appropriate frame manual.

Rear module connections with RM50

RM50 fits in all frames Description

RM50

24 Dual DL-3G modules per

Indigo 4 frame

12 per Indigo 2 frame

6 per Indigo 1 frame

2 per Indigo DT

All frame slots can be used

RM50 BNC I/O assignment

INPUT 1A Channel 1 1.5G SDI input (link A)

INPUT 2A Channel 2 1.5G SDI input (link A)

INPUT 2B Channel 2 1.5G SDI input (link B)

INPUT 1B Channel 1 1.5G SDI input (link B)

3G OUT 1 Channel 1 3G Serial Digital output

3G OUT 2 Channel 2 3G Serial Digital output

Note: As the connections to the RM34 are identical to the RM50 they have not been repeated here.

Crystal Vision Card edge operation

Dual DL-3G User Manual R1.0 626/11/2010

3 Card edge operation

The card front is provided with a 10-digit display and push switches to navigate the

control and status menus. LEDs are provided to give indication of power rail monitoring

and the switch configuration.

3.1 Card edge controls

Dual DL-3G card front edge view

3.2 Card edge buttons

The two tactile push button switches allow the operator to navigate within the menu

structure.

Button Function Normal state Up, Action Down

 Up Menu Push to jump up a menu level or cancel a selection

ENTER Select/Action Push to select a menu and to action and confirm a change

3.3 Card edge rotary control

The board edge rotary encoder is used to navigate through the menu categories and adjust

parameter values.

Control Function

SCROLL

/ADJUST

Rotate SCROLL to identify a menu category. In combination with the ENTER button

select and ADJUST to change the current level or select a further option

Notes: The rotary control can access menus and parameter values by clockwise or anti-clockwise

rotation.

Crystal Vision Card edge operation

Dual DL-3G User Manual R1.0 726/11/2010

3.4 Reading card edge LEDs

Card edge LEDs may be used in conjunction with status information from any connected

remote status panel display or from Statesman if available.

Refer also to the Trouble shooting chapter for more help with solving problems and

monitoring status information.

The following table summarises the card edge LED functions and colours:

Name LED

Colour Function when ON Function when Off

PSU Green Good power supply (PSU) rails One or more of the monitor

supplies is out of specification

Yellow Not currently supported

IP 1A Yellow Input 1A present Input not present

IP 1B Yellow Input 1B present Input not present

IP 2A Yellow Input 2A present Input not present

IP 2B Yellow Input 2B present Input not present

Ch1A Yellow Channel 1 is Level A

Ch1B Yellow Channel 1 is Level B

Ch2A Yellow Channel 2 is Level A

Ch2B Yellow Channel 2 is Level B

3.5 Navigating card edge menus

To access the card edge menu system proceed as follows:

Press the up-arrow [] until a top menu category is reached

Rotate the SCROLL control until the desired menu category is found

Push ENTER to enter the sub menus of that category

Rotate SCROLL to select a sub menu

Push ENTER to select the desired function. Selection will be indicated by the text

being displayed in italic text

Rotate ADJUST to make the desired change to the selected parameter. The display

brightness will flash slowly to indicate that a change has been made and requires

confirmation

Push ENTER to action the change. The display will cease flashing

Use the up-arrow [] and SCROLL control to navigate to further menus

Notes: The displayed menu brightness will flash slowly if confirmation of a change is required.

Crystal Vision Card edge operation

Dual DL-3G User Manual R1.0 826/11/2010

3.6 Card edge configuration

Menu tree

Tip: To reach the top menu push the button repeatedly until a top menu is reached. Rotate the

SCROLL control anti-clockwise until the Status menu appears.

Crystal Vision Card edge operation

Dual DL-3G User Manual R1.0 926/11/2010

Status menu

From the Status top menu press ENTER to access the Status menu list. Rotating the

SCROLL/ADJ control will display the available status information.

Menu Comment

Input 1 Ch A

video format The input 1 channel A video format is shown.

1080p 50/59.94/60, Invalid, Missing.

Input 1 Ch B

video format The input 1 channel B video format is shown.

1080p 50/59.94/60, Invalid, Missing.

Input 2 Ch A

video format The input 2 channel A video format is shown.

1080p 50/59.94/60, Invalid, Missing.

Input 2 Ch B

video format The input 2 channel B video format is shown.

1080p 50/59.94/60, Invalid, Missing.

Input 1 Ch A

VPID Status The input 1 channel A video payload identifier status is shown.

VPID, No VPID.

Input 1 Ch A

link format The input 1 channel A link format is shown.

Dual. Not Dual.

Input 1 Ch A

frame rate The input 1 channel A video frame rate is shown.

50Hz, 59.94Hz, 60Hz.

Input 1 Ch A

link identifier The input 1 channel A link identifier is shown.

Link A, Link B.

Input 1 Ch B

VPID Status The input 1 channel B video payload identifier is shown.

VPID, No VPID.

Input 1 Ch B

link format The input 1 channel B link format is shown.

Dual. Not Dual.

Input 1 Ch B

frame rate The input 1 channel B video frame rate is shown.

50Hz, 59.94Hz, 60Hz.

Input 1 Ch B

link identifier The input 1 channel B link identifier is shown.

Link A, Link B.

Input 2 Ch A

VPID Status The input 2 channel A video payload identifier is shown.

VPID, No VPID.

Input 2 Ch A

link format The input 2 channel A link format is shown.

Dual. Not Dual.

Input 2 Ch A

frame rate The input 2 channel A video frame rate is shown.

50Hz, 59.94Hz, 60Hz.

Input 2 Ch A

link identifier The input 2 channel A link identifier is shown.

Link A, Link B.

Input 2 Ch B

VPID Status The input 2 channel B video payload identifier is shown.

VPID, No VPID.

Tabla de contenidos

Otros manuales de Convertidor de medios de Crystal Vision

Crystal Vision

Crystal Vision Indigo ALLDAC Manual de usuario

Crystal Vision

Crystal Vision DEC105S Manual de usuario

Crystal Vision

Crystal Vision ADDEC-310 Manual de usuario

Crystal Vision

Crystal Vision Indigo Wallbox Q-Down Manual de usuario

Crystal Vision

Crystal Vision Dual 3G-DL Manual de usuario

Crystal Vision

Crystal Vision UP-DOWN-VF Series Manual de usuario

Crystal Vision

Crystal Vision Up-Down 3G Series Manual de usuario

Crystal Vision

Crystal Vision DEC103S Manual de usuario

Crystal Vision

Crystal Vision DDAA132P Manual de usuario

Crystal Vision

Crystal Vision ENDAC Manual de usuario

Crystal Vision

Crystal Vision Vision 3 Manual de usuario

Crystal Vision

Crystal Vision Indigo Q-Down Mini Manual de usuario

Crystal Vision

Crystal Vision DEC104S Manual de usuario

Crystal Vision

Crystal Vision Up-and-down Manual de usuario

Crystal Vision

Crystal Vision ADC104 Manual de usuario

Crystal Vision

Crystal Vision ADDEC-100 Manual de usuario

Crystal Vision

Crystal Vision DDAA132 Manual de usuario

Crystal Vision

Crystal Vision Indigo DACA214 Manual de usuario

Crystal Vision

Crystal Vision Indigo ADCA412 Manual de usuario

Crystal Vision

Crystal Vision ShARC-XP Manual de usuario

Crystal Vision

Crystal Vision Indigo ADDEC-210 Manual de usuario

Crystal Vision

Crystal Vision Q-Down-A-AFD Manual de usuario

Crystal Vision

Crystal Vision ENC116 Manual de usuario

Crystal Vision

Crystal Vision ARC-10MC Manual de usuario

Manuales populares de Convertidor de medios de otras marcas

SoundTraxx

SoundTraxx Blunami BLU-2200 Manual de usuario

SPROLINK

SPROLINK VA1 Manual de usuario

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manual de usuario

Nikon

Nikon AF-S TC-20E III Manual de usuario

Axis

Axis AXIS Q7406 Manual de usuario

Omega

Omega TAC80B-J Manual de usuario

Zoom

Zoom Thunderbolt TAC-2R Manual de usuario

OST

OST iConverter 10/100M Manual de usuario

Vertiv

Vertiv Netsure Manual de usuario

birddog

birddog MINI Manual de usuario

Roland

Roland GI-10 Manual de usuario

Wallenstein

Wallenstein WX310 Manual de usuario

Pace

Pace MSS 200-1 Manual de usuario

Solar Converters

Solar Converters EQ 12/24-50 Manual de usuario

CYP

CYP EL-7400V Manual de usuario

TIE

TIE MIDI 1i1o Manual de usuario

DCS

DCS Vivaldi Upsampler Manual de usuario

Westermo

Westermo MCW-211 SERIES Manual de usuario