Crow Runner Series Manual de usuario

ELECTRONICENGINEERING LTD.

Runner Series

WIRELESSAND WIRED CONTROL PANEL

User’sGuide

Covers:

Runner(NewLook)LED Keypad

Runner(NewLook)LCD Keypad

(Coming Soon)

Rev: C G.T. (Updated) April 2008

Crow LimitedWarranty

(Crow) warrants this product tobefree from defects in materials andworkmanshipunder normal use andservice

for aperiodof one year from the last dayof the weekandyear whose numbers are printedon the printedcircuit

boardinside his product.

Crow’s obligation is limitedto repairingor replacingthis product, at itsoption, free of charge for materials or labor,

if it is provedtobedefectivein materialsorworkmanshipunder normal use andservice. Crow shall haveno

obligation under this LimitedWarrantyor otherwise if the product is alteredor improperlyrepairedor servicedby

anyone other then Crow.

There are no warranties, expressedor implied,of merchantabilityor fitnessfor aparticular purpose or otherwise,

which extendbeyondthe description on the face hereof.Inno case shall Crow beliable to anyone for any

consequential orincidental damages for breach of thisor anyother warranty,expressedor implied,or upon any

other basis of liabilitywhatsoever, even if the loss or damage is causedby Crow’s own negligence or fault.

Crow does notrepresent that this productcan notbecompromisedor circumvented;that this product will prevent

anyperson injuryor propertyloss or damageby burglary,robbery,fire or otherwise; or that this product will in all

cases provideadequate warningor protection.Purchaserunderstandsthataproperlyinstalledandmaintained

product can onlyreduce the riskof burglary, robberyor other events occurringwithout providingan alarm, but it is

not insurance or aguarantee that suchwillnot occurorthat there willbenopersonal injuryor propertylossor

damageas aresult. Consequently,Crowshallhaveno liabilityfor anypersonalinjury,propertydamageor any

other lossbasedonclaimthatthisproduct failedtogiveanywarning.However, ifCrowisheldliable, whether

directlyor indirectly,foranylossordamagearisingunder this limitedwarrantyor otherwise, regardlessof cause

or origin, Crow’s maximum liabilityshallnot in anycase exceedthe purchase price of this product, whichshall be

the complete andexclusive remedy against Crow.

Information in this document is subject to change without notice. No part of this document maybe reproducedor

transmittedin anyform or by anymeans, electronic or mechanical, without express written permission of

Printversion 002

Contents

INTRODUCTION...................................................................................................................................1

THE CROW ALARM CONTROL SYSTEM.......................................................................................................1

TYPICAL ALARM SYSTEM CONFIGURATION..................................................................................................1

KEYPAD DESCRIPTION........................................................................................................................2

FUNCTION KEYS.................................................................................................................................2

ALPHANUMERIC KEYS ..........................................................................................................................2

AUDIBLE SIGNALS ..............................................................................................................................2

INDICATORS .....................................................................................................................................3

SUMMARYOF FUNCTIONS .....................................................................................................................3

OPERATING THE KEYPAD....................................................................................................................4

HOW TO ARMTHE SYSTEM BEFORE EXIT ...................................................................................................4

Preparing the System forArming.......................................................................................................4

Arming the System............................................................................................................................4

Quick Arm (When enabled atinstallation)..........................................................................................4

Disarming the System.......................................................................................................................4

Stopping and Resetting Alarms..........................................................................................................4

ARMINGTHE SYSTEM WHILE STAYING HOME..............................................................................................5

Arming the System inStayMode.......................................................................................................5

Disarming the System.......................................................................................................................5

HOW TO ARM PARTITIONS ....................................................................................................................5

HOW TO BYPASS ZONES.......................................................................................................................5

USING CHIME (IF ENABLED AT INSTALLATION)............................................................................................6

EMERGENCY ALERTS............................................................................................................................6

Howto initiate Panic..........................................................................................................................6

Howto initiate Medical Alarm.............................................................................................................6

Howto initiate Fire Alarm...................................................................................................................6

GENERATE THREATOR DURESS ..............................................................................................................6

HOW TO READ LED INDICATIONS ...........................................................................................................7

HOW TO READ SYSTEM MESSAGES ..........................................................................................................8

HOW TO READ TROUBLE MESSAGES.........................................................................................................8

HOW TO DISPLAY EVENTS FROM MEMORY .................................................................................................8

HOW TO CONTROL OUTPUTSAND DEVICES ..............................................................................................12

ENTERINGTHE USER PROGRAM/CLIENT MODE ..........................................................................................12

HOW TO CHANGEOR ADD CODES .........................................................................................................12

About Master Code and the User Code...........................................................................................12

Howto Change the Master Code.....................................................................................................13

Howto Add or Change a User Code (other than the Master Code)..................................................13

Howto Delete the User Code (ItisAdvisableto Change a code and Not delete it)...........................13

ADDING/CHANGING TELEPHONE NUMBERS...............................................................................................13

HOW TOSET TIMEAND DATE ..............................................................................................................14

HOW TO OPERATE THE ACCESS CONTROL OUTPUT .....................................................................................14

HOW TOSTART WALK TEST MODE ........................................................................................................14

HOW TO ANSWERAN IN-COMING CALL...................................................................................................14

Contents

USING THE REMOTE COMMAND CONTROL ................................................................................................15

USING LOCAL COMMAND CONTROL........................................................................................................16

LCD KEYPAD.......................................................................................................................................17

ADJUSTING BACKLIGHTING AND BUZZER TONE ..........................................................................................17

LCD KEYPAD IN LOCAL EDIT MODE .......................................................................................................18

Accessing LocalEdit Mode..............................................................................................................18

LocalEditMode DirectProgramAddresses.....................................................................................18

LCD KEYPAD LOCAL EDIT MODE MENU PROGRAMMING....................................................................19

Changing the Area SingleCharacter Identifier.................................................................................21

Changing the Zone Names..............................................................................................................21

Changing the Keypad Area Name...................................................................................................22

Changing the Keypad Name............................................................................................................22

Changing the User Names..............................................................................................................22

Changing the Output Names...........................................................................................................22

Resetting Individual Text to Default orLast SavedSetting...............................................................23

Resetting All Text toDefault............................................................................................................23

Copying Text toanother LCD Keypad..............................................................................................23

Exiting LocalEditProgram Mode.....................................................................................................23

CUSTOMIZATION CHART...................................................................................................................24

Introduction

TheCrow Alarm ControlSystem

Weare really pleased that you chose to protect your premises andpossibly even your lives with

our RUNNER SERIES from Crow Electronic Engineering Ltd.

The RUNNERSERIES is a highly advanced,multifunction alarm controlsystem,designed to

flawlessly manageyour securitysystem at homeor at business,protects you against burglary

and supports the operation of multipleelectronic devices.

The RUNNER SERIES has manyincredible program options and additionalaccessories that can

enhance the standard features of the panel from simple “HomeAutomation” to “Radiocontrol”

and VoicePrompted Command control”.Please askyour installer to find out more about these

powerfulfeatures.

You can phone your home to check or changethe status of any output using the keys on your

phone.Arm or disarm the whole house or just onearea,allwith your own voice confirming your

selections.

Imagine turning on the spa before leaving work soit is hot when you getin the door.The under-

floor heating hasjust automatically switched on usingthe on boardtimer and you have just

openedthe roller-door and disarmed the garage from your cellphone so thewhite ware

repairman can work on your washer.

The controller supports a 16 LED keypad or the more sophisticated LCD (liquidCrystal Display)

keypad.

It also has a comprehensive alarm event memory that logs allcontroller activity with a time and

date stamp.

TypicalAlarm System Configuration

The protected premises can be divided up into 16 zones,as defined by theinstallation scheme.

The protected area can begrouped into two separate partitions (A and B).

The system enables you in a business environment,to conveniently group separately,the offices

from the warehouse area,orin a private residence,thedifferent rooms of the home.For

example,living room,bedroom,and maybe the basement and attic.

These groups or zones can reactspecifically to different types of events and then generating an

alarm or activate a device.

The system can be armed intwo different modes:

Arm – the protected areas are entirelyvacated.

Stay – people and pets populate the protected areas.

You have access to thekeypad's controlfeatures,and can change thesettings yourself.

The system can be accessed viamultiplekeypads (each located at a different site).Up to eight

keypads can be integrated into the system.Accesslevels and youraccess codes are described

later on in thisguide.

Keypad Description

The LED Keypad shows allthe information requiredto operatethe system.The User

communicates withthe alarm system viathe keypad.The Keypad displayscontinuous

information aboutthe status of the alarm system,and enables the User to operate the systemin

different modes,change settings and programUsers' access codes.

The keypad also collects and records events to bedisplayed afterward on request,to overview

system activities,and to analyze system performance for diagnostics.

Function Keys

These keys are used to arm the system,enter commands to alter system settings,or scroll

through the history events.

=ARM, =STAY, =BYPASS, =PROGRAM, =CONTROL, =MEMORY,

=ENTER

Alphanumeric Keys

These keys are used to enter codes,Initiate Emergency or used for programming.

AudibleSignals

When the keypadis usedto activate or deactivatethe different functions it emits different

audible beeps.Theirmeaning is describedin the table below.

Table 1 Listof Audible Signals

SoundSequenceDescription

Shortbeep Once onlyA key inthekeypad has been pressed.

3 shortbeepsOnce onlyOperation carriedout successfully.

Long beep Once onlyIllegal operation or wrongkey pressed.

Slowbeeping Through the Exitor

Entry delaytime

Exitorentry delay warning. Whenarming the system,this

indicatesyoumustexittheprotected area. Whendisarmingthe

system,itindicates youhaveentered the protectedentry zone.

Keypad Description

Indicators

There are 30 LEDindicators to show the status of the system.

qZone and Status indicators LEDs 1- 16, =zones sealed (ready)

qPartitions indicators LEDs A or Bor C (Spare)

qMemory indicator= ,Bypass indicator=

qProgram indicator= ,Mainsindicator=

qTrouble indicator= ,Batteryindicator= ,Line indicator= ,Controlindicator=

Summary of Functions

The system's mainfunctions arelistedin table

Function Keys Description Notes

Full or

Partition ArmCC OD E CInitiatesfull arm

Full Arm CInitiatesfull arm Onlyif enabled by

installer.

Disarm

during exit CDisarms the system

during exit delay

Only whenslowbeeping

isemitted.

Disarm CC OD E CDisarms the system Stopping Alarms.

Function Keys Description Notes

Arm Stay C C C OD E CInitiatespartialalarm

when the useris home

Onlyif enabled by

installer.

Arm Stay CInitiatespartialalarm

when the useris home

DisarmStay CC OD E CDisarms the system

DisarmStay CDisarms the system

Bypass C C

Zone#

CBypasses azone(s) Repeats theprocedure to

un-bypasszones.

Initiate Panic C+ Activates emergency

alert

Onlyif enabled by

installer.

Initiate

Medical C+Activates emergency

alert

Onlyif enabled by

installer.

Initiate Fire

Alarm C+Activates emergency

alert

Onlyif enabled by

installer.

Memory CInitiatesdisplayof

events frommemory.

<ENTER> cancels

memory readout

Displays events,and

automaticallyscrollsto

the nexteventevery 2.5

sec.

(Use <MEMORY> key to

scrollup manually).

Chime

Enable/disabl

C C Enableor disablechime

function

Onlyif enabled by

installer

Control C C Device# CActivates ordeactivates

outputs and devices

Press<Control>for2

seconds

Change or

Add Users'

code

C C MCODE CActivates program mode

to addorchangeUsers'

codes

For details see

page 16

Note:Ifyoustarted an operation incorrectly, press toexitand returnto the previous mode.

Operating theKeypad

How to Arm theSystem beforeExit

Preparing the SystemforArming

Verify that allzoneindicators are off,when allzones are closed (alldoors,exits and windows are

closed and motion inthe protected area is restricted or bypassed),the systemisready to be

armed.If one or morezone indicators are illuminated,it displays theopen zones.

Closeopen zones,or bypassthem.Bypass any zone you cannot close,<Bypass> indicator

flashesindicating bypassed zone(s).For details see page 9.

Note: Bypassed zones are not protected.

Arming the System

Before leaving premises you must armthe system.

Arming the alarm system turns on all detectors in the partition/s being armed.

1. Enter your code.

2.Press < > to arm the system.

Thereis an exit delay prior to the system being armed.During this delay time,a slow

beeping is heard to indicate that the systemis not armed yet and reminds you to vacate

the protected area.

The Aor Bindicator lights up to indicate that the system is armed.

The indicators may go out few seconds after exitdelay times out,depending on theinstallation

setting.

qTo disarm the system during the exitdelay,press< >.

QuickArm(Whenenabled atinstallation)

qPress< > to arm the system.

The Aor Bindicator is lit,the systemisarmed.

During exit delaytime,a slow beeping is heard reminding you tovacate the protected area.

Disarming the System

1.Enter your code.

2.Press< >.

The Aor Bindicator goesoff,the systemis now disarmed.

Stopping and Resetting Alarms

1.Enter your code.

2.Press< >.

Thisstops the alarm at any time,and also turns off any audible sirens.

Operating theKeypad

ArmingtheSystem WhileStayingHome

Arming the SysteminStay Mode

Thistype of arming is used when people are present within the protectedarea.At nighttime,

when the family isabout to retire,perimeter zonesare protected,but not the interior zones.

Consequently,interior movements are ignored by the system.

1.Press < >.

2.Enter your code.

3.Press < >.

The Aor Bindicator flashes indicating that the system is now armed instay mode.

Quick Stay

This feature must be enabled atinstallation time.

qPress< > to arm the system.

During exit delayyou can leave thepremises.If you wish to stay,or you don’t want anybody

to enter the protected premises,you can cancelthe Entry/Exit delay by pressing the

< > key.

The slow beeping stops andthe system is then immediately armed.

The Aor Bindicator flashes to indicatethat thesystemisarmed instay mode.The indicators

may go out afew seconds after exit delay expired,depending on the installer's setting.

Disarming the System

Enter user’scode and press < >,or press < > if enabledby installer.

The Aor B indicatorgoes off to indicatethat thesystem is disarmed.

How to Arm Partitions

The protected area can begrouped into 3separatepartitions (Aor B).The system can be

groupedfor User‘s convenience to separate,in abusiness environment,the offices from the

warehouse area,or in aprivate residence,the different rooms of the home,e.g., living room,

bedroom,etc.

ToarmpartitionAenter usercode for partitionA

ToarmpartitionB enterusercodeforpartitionB

Note:to arming partition with code see page 8“How to arm the system before exit”

During exit delayyou can leave premises.Atthe end of the procedurethe Aor Bindicatorlights

up to indicate that the partition A or/and Bor C is armed.

(The indicators may go out after a few seconds,dependingon the installer's setting).

To disarm partition,see "Disarming the System".

How to Bypass Zones

Bypass any zone that cannot be closed.You can bypass selected zones prior to arming.Itis

also used to temporarilyexclude a faulty zone from service,which requires repair.

To bypass a selected zone,press < >,Bypass indicator lights up to indicate that the systemis

inbypassmode.

Enter the zonenumber(e.g.01, 05, 12) one or more zones,the zone LEDindicators lights up

to indicatethat thezone is bypassed,following press < >,the Bypass LED flashes to indicate

zone(s) bypassed.

Operating theKeypad

While in the Bypassmodeitis possibleto bypass more than one zone,press < >,the Bypass

indicator lights to indicate that the system is inbypass mode.

Add the zone number (example,03) one or morezones,the zone LEDindicatorslights to

indicate that the zoneisbypassed,then press< >,the Bypass LED flashes to indicate

zone(s) bypassed.

To resetbypassed zones,press < >,enter zonenumber (example,07, 13),the zone LED

indicators go off to indicate that the zone is no longer bypassed.Press < >.

NOTE:

Disarmingautomatically un-bypassesallzone.

UsingChime(If enabledat Installation)

A Chime(Day zone)is adetector that can be partarmed while you areat home but workingin

another part of the building.Itcan be programmed to operate a buzzeror light to let you know

you have a visitor.

To disable the Day (chime)zone,press< > and < >,ControlLEDindicatorlights up to

indicate that Chimeisdisabled.

To enableChime mode press < > and < > ControlLED goes off to indicate that Chime is

active.

Emergency Alerts

Thisthreespecial key’s function is best programmed by your installerto suit your individual

situation.Most commonly it is used ina panic situation.

These are a “PANIC”,“FIRE”,and“MEDICAL” alarm.Pressing two buttons simultaneously

generates the Panic,Fire and Medicalalarms.

How to initiate Panic

qPresssimultaneously keys < >and < >.

How to initiate Medical Alarm

qPresssimultaneously keys < > and < >.

How to initiate Fire Alarm

qPresssimultaneously keys < > and < >.

GenerateThreat or Duress

If you are compelled to disarm the system under threat,you must enter the duress digit before

the user’scode to activate the automaticdialer.The duress digit shifts up your usualcode by

one digit.If your code is 345 and 8isyour duress digit,than entering 8345 modifies your code.

The modified duress code disarms the systemin a normalway,but at the same time activates

the dialer silently to reporta “duress event” without arousing suspicion.(For detailsask the

installer).

Otros manuales para Runner Series

Tabla de contenidos

Otros manuales de Teclado de Crow

Crow

Crow Power Wave CR16M Instrucciones de funcionamiento

Crow

Crow Power Wave CR16M Manual del propietario

Crow

Crow OLED Keypad Manual de usuario

Crow

Crow OLED Manual de usuario

Crow

Crow FW-KP Manual

Crow

Crow Runner Series Instrucciones de funcionamiento

Manuales populares de Teclado de otras marcas

BFT

BFT SELETTO Manual de usuario

Micro Id

Micro Id MP7G3BL Manual de instrucciones

WindowMaster

WindowMaster WLI 130 Manual de usuario

ACT

ACT ACT PRO 1030 Manual de usuario

Cardin

Cardin SSB Series Manual de usuario

Harman Kardon

Harman Kardon KP 1 Manual de usuario

Chamberlain

Chamberlain KPR2000 Guía del usuario

CYP

CYP CR-KP1 Manual de usuario

Aeware

Aeware k-35 Series Guía de referencia

Aritech

Aritech CS-175 Series Manual de usuario

GE NetworX NX-1600E Series Manual de usuario

Lenze AC Tech

Lenze AC Tech MC SERIES Manual de usuario

Burg Wächter

Burg Wächter secuENTRY 7711 Manual de usuario

Aeware

Aeware in.k450 Manual de usuario

Lenze

Lenze EPM-H410 Manual de usuario

Toshiba

Toshiba RKP007Z Manual de usuario

Gemini

Gemini GEM-DXK1 KEYPAD Manual de usuario

Russound

Russound MDK-C5 Manual de funcionamiento