Crestron TSW-770-GV Manual de usuario

The Crestron® TSW-770-GV and TSW-1070-GV are wall mount touch

screens that feature web browsing, Smart Graphics® software and

HTML5 UItechnology, custom-programmable virtual buttons,

H.265/H.264 streaming video, and PoE+(Power over Ethernet

Plus)network power. The touch screens also provide built-in applications

for room scheduling, conferencing, and home control.

The TSW-770-GV and TSW-1070-GV are modified versions of the

TSW-770 and TSW-1070 series touch screens, which eliminate the

microphone, the Bluetooth® communications beacon, and Wi-Fi® network

connectivity to comply with government applications demanding extra

privacy and security.

NOTE:The TSW-770-GVand TSW-1070-GV are functionally similar.

For simplicity within this guide, the term "touch screen"is used except

where otherwise noted.

In the Box

1TSW-770-GVor TSW-1070-GV*, Wall Mount Touch Screens

Additional Items

1 Bracket, Mounting (2055453)

4 Screw, 6-32 x 3/4 in., Undercut Head, Phillips (2033247)

4 Screw, M3 x 16 mm, Flat Head,Phillips (2013788)

2 Screw, M3.5 x 25 mm, Flat Head,Phillips (2023756)

1 Bracket, Security (2055451)

2 Screw, M2 x 0.4 mm, Security (2055454)

1 Key, Security BracketRelease (2055452)

*Refer to the TSW-770-GV-B-S and TSW-1070-GV-B-S product pages at

www.crestron.com for a complete list of color variations.

Install the Mounting Bracket

The TSW-770-GV and TSW-1070-GVinstall over a standard 2-gang or

3-gang U.S. electrical box, a 2-gang European electrical box, or a 2-gang

U.K. electrical box.

NOTES:

lAdditional mounting options are possible using the following

mounting accessories. For more information, refer to the product

pages at www.crestron.com.

oTSW-UMB-70 universal mounting bracket

oTSW-UMB-70-PMK preconstruction mounting kit

oTSW-UMB-70-BBI wall mount back box

oTSW-770/1070-MSMK series multisurface mounting kits

oTS-770/1070-MUMK mullion mounting kit

oTSW-770/1070-RMB series retrofit mounting brackets

oTSW-770/1070-RMK series rack mount kits

lInstalling the mounting bracket to an electrical box is required only if

one of the mounting solutions above is not used. Refer to the

mounting solution documentation at www.crestron.com/manuals.

To mount the touch screen into an electrical box, use the appropriate

screws (four 6-32x 3/4in. screws, four M3x16mm screws, or two

M3.5x25 mm screws) to attach the mounting bracket to the electrical

box as shown in the following illustrations:

NOTE:For U.S. installations, use a #2 Phillips screwdriver. For European

or U.K. installations, use a #1 Phillips screwdriver.

TSW-770-GV and TSW-1070-GV QuickStart

7 in. and 10.1 in. Wall Mount Touch Screens, Government Version

lFor U.S. installations, use the four 6-32x 3/4in. screws.

lFor European installations, use the four M3x16mm screws.

lFor U.K. installations(not pictured), use the two M3.5x25 mm screws

to attach the mounting bracket to the electrical box. Insert the screws

through the center openings in the left and right sides of the mounting

bracket.

Install the Security Bracket (Optional)

The included security bracket may be attached to the touch screen to

prevent unauthorized removal after installation. The security bracket

snaps into place behind the mounting bracket so that the touch screen

cannot be removed without using the included metal prong.

Use the two M2 x 0.4 mm screws to attach the security bracket to the

touch screen rear housing as shown in the following illustration.

TSW-770-GV and TSW-1070-GV QuickStart

7 in. and 10.1 in. Wall Mount Touch Screens, Government Version

To remove the touch screen after installation, use the included release key

to push down on the security bracket release tabs as shown in the

following illustration while gently pulling the touch screen away from the

mounting bracket. Connect the Touch Screen

Route all necessary cables through the rear of the mounting bracket, and

then make connections to the side of the touch screen rear housing.

Observe the following when connecting the touch screen:

lPower and data connection is provided to the touch screen by a single

Ethernet cable. A Crestron PoE (Power over Ethernet) power supply,

such as the PWE-4803RU, or a PoE-capable network switch is

recommended (both not included).

lThe USB ports are used to connect compatible Crestron LED

accessories to the touch screen.

NOTE: The TSW-770-GV may use either PoE or PoE+ to supply

power to compatible LED accessories over USB; the TSW-1070-GV

must use only PoE+ to supply power to LED accessories over USB.

lApply power after all connections have been made.

TSW-770-GV and TSW-1070-GV QuickStart

7 in. and 10.1 in. Wall Mount Touch Screens, Government Version

Mount the Touch Screen

After all connections have been made, push the touch screen gently into

the mounting bracket so that its rear housing is secured within the center

opening within the mounting bracket.

If the touch screen is not level after installation, pull it out of the mounting

bracket and loosen the screws holding the bracket into place. This

procedure allows the mounting bracket to be rotated slightly.

Once the mounting bracket has been repositioned, retighten the screws,

reinstall the touch screen into the bracket, and ensure that the touch

screen is now level.

NOTE:To clean or disinfect a touch screen display, use a soft, clean,

damp (not wet) cloth with any commercially available non-ammonia

glass cleaner or disinfectant cleaner. Bezels do not provide a complete

watertight seal, so apply cleaning solution to the cloth rather than the

surface of the touch screen. Wipe the touch screen clean and avoid

ingress of moisture beneath the bezels.

Configure the Touch Screen

When power is applied for the first time, the following screen is displayed.

The touch screen may take up to two minutes to boot.

TSW-770-GV and TSW-1070-GV QuickStart

7 in. and 10.1 in. Wall Mount Touch Screens, Government Version

Touch the screen to display the main Setup screen (TSW-1070 shown).

Device settings for the touch screen may be configured using the built-in

setup screens or the web configuration interface. For more information

on configuring the touch screen, refer to the TSW-570, TSW-770, and

TSW-1070 Product Manual (Doc.8550).

Access the Device Setup Screens

To access the built-in setup screens, place five fingers on the display and

hold for 15 seconds.

Use the setup screens to configure various settings for the touch screen,

including Ethernet setup, IP table setup, audio setup, display setup,

standby timeout, application selection, diagnostics, and the virtual

toolbar.

Access the WebConfiguration Interface

The touch screen provides a web configuration interface that is used to

view and configure various touch screen settings and to select an

application. The interface can be accessed using the touch screen IP

address or the XiO Cloud® service.

Touch Screen IPAddress

To access the web configuration interface using the touch screen IP

address:

1. Ensure that the touch screen is connected to the network.

2. Use the Device Discovery tool in Crestron Toolbox™ software to

discover the touch screen and its IP address on the network.

3. Enter the control system IPaddress into a web browser.

XiOCloud Service

The XiO Cloud service allows supported Crestron devices across an

enterprise to be managed and configured from one central and secure

location in the cloud. Supported devices are configured to connect to the

service. Use of the service requires a registered XiOCloud account.

NOTE:The device may be disconnected from the service by navigating to

the Cloud Services tab in Crestron Toolbox software (Functions >

Device Info >Cloud Services). For details, refer to the Crestron Toolbox

help file.

TSW-770-GV and TSW-1070-GV QuickStart

7 in. and 10.1 in. Wall Mount Touch Screens, Government Version

To access the web configuration interface using the XiOCloud service:

1. Record the MAC address and serial number that are labeled on the

shipping box or rear panel of the device. The MAC address and serial

number are required to add the device to the service.

2. Do either of the following:

lFor existing accounts, access the XiO Cloud service at

https://portal.crestron.io.

lFor new accounts, register for a XiO Cloud account at

www.crestron.com/xio-cloud-registration.

3. Claim the device to the service as described in the XiO Cloud User

Guide (Doc. 8214).

4. Select the device from the cloud interface to view its settings.

Set the Time Zone

The time zone must be set on the touch screen if it will not be paired with

a control system IPtable.

To set the time zone:

1. Access the web configuration interface using either the touch screen

IP address or the XiO Cloud service.

2. Select the Settings tab.

3. Navigate to System Setup >Time/Date.

4. Select the time zone where the touch screen will be used from the Time

Zone drop-down menu.

5. Click Save Changes on the top right of the screen.

Create an AdminAccount

The first time the web configuration interface is accessed, a dialog box is

displayed asking the user to create an admin account. A similar message

is displayed when connecting to the device in Crestron Toolbox software if

an admin account has not already been created.

To create an admin account:

1. Enter a username and password for the admin account in the

appropriate text fields.

CAUTION:Do not lose the username and password for the admin

account, as the device must be reset to factory settings to regain

access.

2. Click OK. A dialog box is displayed stating that enabling authentication

will restart the web session.

3. Click Yes to confirm and restart. The username and password created

in step 1 must be entered to regain access to the web configuration

interface.

NOTE:The username and password must also be entered when

connecting to CrestronToolbox or XPanel.

TSW-770-GV and TSW-1070-GV QuickStart

7 in. and 10.1 in. Wall Mount Touch Screens, Government Version

Select an Application

The touch screen ships with various built-in applications. An application

may be selected from the default project that ships with the touch screen.

NOTE:Applications can be selected and configured from the device

setup screens or from the web configuration interface at any time. For

more information, refer to the TSW-570, TSW-770, and TSW-1070

Product Manual (Doc.8550).

To select a touch screen application:

1. Tap Touch Here to Enable a Specific Application on the device splash

screen. Refer to the first image in Configure the Touch Screen.

2. Select the desired touch screen application from the Choose

Application Below menu that is displayed.

3. Click Confirm. The touch screen reboots to display the user interface

for the selected application.

If a custom user project will be used, tap User Project. Custom user

projects can be uploaded using the web configuration interface or

Crestron Toolbox software.

Visit the Product Pages

Scan the QR code to visit the product page.

TSW-770-GV

www.crestron.com/model/6510826

TSW-1070-GV

www.crestron.com/model/6510827

TSW-770-GV and TSW-1070-GV QuickStart

7 in. and 10.1 in. Wall Mount Touch Screens, Government Version

Additional Information

Original Instructions

The U.S. English version of this document is the original instructions.

All other languages are a translation of the original instructions.

Crestron product development software is licensed to Crestron dealers and Crestron

Service Providers (CSPs) under a limited nonexclusive, nontransferable Software

Development Tools License Agreement. Crestron product operating system software is

licensed to Crestron dealers, CSPs, and end-users under a separate End-User License

Agreement. Both of these Agreements can be found on the Crestron website at

www.crestron.com/legal/software_license_agreement.

The product warranty can be found at www.crestron.com/warranty.

The specific patents that cover Crestron products are listed at

www.crestron.com/legal/patents.

Certain Crestron products contain open source software. For specific information, visit

www.crestron.com/opensource.

Crestron, the Crestron logo, Crestron Toolbox, Crestron XiO Cloud, Rava, and Smart

Graphics are either trademarks or registered trademarks of Crestron Electronics, Inc. in

the United States and/or other countries. Bluetooth is either a trademark or registered

trademark of Bluetooth SIG, Inc. in the United States and/or other countries. Wi-Fi is

either a trademark or registered trademark of Wi-Fi Alliance in the United States

and/or other countries. Other trademarks, registered trademarks, and trade names may

be used in this document to refer to either the entities claiming the marks and names or

their products. Crestron disclaims any proprietary interest in the marks and names of

others. Crestron is not responsible for errors in typography or photography.

Doc ID 8775A

07/28/20

TSW-770-GV and TSW-1070-GV QuickStart

7 in. and 10.1 in. Wall Mount Touch Screens, Government Version

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Panel táctil de Crestron

Crestron

Crestron CPC-2000A Manual de usuario

Crestron

Crestron SmarTouch STS ST-1550C Manual de usuario

Crestron

Crestron Isys TPMC-12L Manual de usuario

Crestron

Crestron STX-1550CW Manual de usuario

Crestron

Crestron TPMC-10 Manual de usuario

Crestron

Crestron Isys TPS-15G-QM Manual de usuario

Crestron

Crestron Isys TPS-6 Manual de usuario

Crestron

Crestron TST-600 Manual de usuario

Crestron

Crestron STX-1700C Manual de usuario

Crestron

Crestron Isys TPMC-4SM Cómo utilizar

Crestron

Crestron C2N-FT-TPS4 Manual de usuario

Crestron

Crestron TSW-570 Manual de usuario

Crestron

Crestron QM-FTCC Cómo utilizar

Crestron

Crestron TSW-570P Manual de usuario

Crestron

Crestron Isys TPS-5000 Manual de usuario

Crestron

Crestron TSW-570 Manual de usuario

Crestron

Crestron Wallmount Touchpanel Manual de usuario

Crestron

Crestron TSW-570 Manual de usuario

Crestron

Crestron Isys TPS-4500 Manual de usuario

Crestron

Crestron TST-902 Dibujo dimensional

Crestron

Crestron TPS-FPAR3100L Manual de usuario

Crestron

Crestron Isys TPS-3100L Manual de usuario

Crestron

Crestron TSW-70 Series Manual de usuario

Crestron

Crestron Isys TPS-4500LV Manual de usuario

Manuales populares de Panel táctil de otras marcas

FlowLine

FlowLine Data loop Manual de usuario

ALPEX

ALPEX AEx-8 P Series Manual de usuario

Ltech

Ltech E5S Manual de usuario

Harman

Harman AMX MODERO S MSD-701-L2 Manual de usuario

Acnodes

Acnodes PC 1150 Manual de usuario

AIS

AIS IP10IA99 series Manual de usuario

IBASE Technology

IBASE Technology ASTUT-152-RE1S Manual de usuario

YASKAWA

YASKAWA TP 610C Manual de usuario

B&R

B&R Power Panel C Series Manual de usuario

Beijer Electronics

Beijer Electronics X2 control Manual de usuario

AXIOMTEK

AXIOMTEK GOT321W-521 Manual de usuario

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Manual de usuario

Qomo

Qomo QIT1386 Manual de usuario

DFI

DFI KS104-CD Manual de usuario

AMX

AMX AXP-PPC Guía

Sartorius

Sartorius X3 PR 5410 Manual de usuario

AMX

AMX Modero X Series Manual de usuario

Advantech

Advantech TPC-30 Series Manual de usuario