Crestron TSW-770R Series Manual de usuario

The Crestron® TSW-770R and TSW-1070R are wall mount touch screens

designed specifically to run the Crestron Home™ OS application. The

touch screens support H.265/H.264 streaming video, a Rava® SIP

intercom, Wi-Fi® network connectivity, and PoE+ (Power over Ethernet

Plus) network power.

NOTE:The TSW-770Rand TSW-1070R are functionally similar. For

simplicity within this guide, the term "touch screen"is used except

where otherwise noted.

In the Box

1 TSW-770Ror TSW-1070R*, Wall Mount Touch Screens

Additional Items

1 Bracket, Mounting (2055453)

4 Screw, 6-32 x 3/4 in., Undercut Head, Phillips (2033247)

4 Screw, M3 x 16 mm, Flat Head,Phillips (2013788)

2 Screw, M3.5 x 25 mm, Flat Head,Phillips (2023756)

4 Anchor, #6-8, Self-Drilling (2035879)

4 Screw, 6-AB x 1 in., Flat Head, Phillips (2056874)

1 Bracket, Security (2055451)

2 Screw, M2 x 4 mm, Security (2055454)

1 Key, Security BracketRelease (2055452)

*Refer to the TSW-770R-B and TSW-1070R-B product pages at www.crestron.com for a

complete list of color variations.

Install the Mounting Bracket

The TSW-770Rand TSW-1070R install over a standard 2-gang or

3-gang U.S. electrical box, a 2-gang European electrical box, or a 2-gang

U.K. electrical box. The touch screen also installs into drywall.

NOTES:

lAdditional mounting options are possible using the following

mounting accessories. For more information, refer to the product

pages at www.crestron.com.

oTSW-UMB-70 universal mounting bracket

oTSW-UMB-70-PMK preconstruction mounting kit

oTSW-UMB-70-BBI wall mount back box

oTSW-770/1070-MSMK series multisurface mounting kits

oTSW-770/1070-MUMK mullion mounting kit

oTSW-770/1070-RMB series retrofit mounting brackets

oTSW-770/1070-RMK series rack mount kits

lInstalling the mounting bracket to an electrical box is required only

if one of the mounting solutions above is not used. Refer to the

documentation for your chosen mounting solution at

www.crestron.com/manuals.

Electrical Box Mounting

To mount the touch screen into an electrical box, use the appropriate

screws (four 6-32x 3/4in. screws, four M3x16mm screws, or two

M3.5x25 mm screws) to attach the mounting bracket to the electrical

box as shown in the following illustrations:

NOTE:For U.S. installations, use a #2 Phillips screwdriver. For

European or U.K. installations, use a #1 Phillips screwdriver.

TSW-770Rand TSW-1070R QuickStart

7 in. and 10.1 in. Wall Mount Touch Screens, Crestron Home™ OS Version

lFor U.S. installations, use the four 6-32x 3/4in. screws.

lFor European installations, use the four M3x16mm screws.

lFor U.K. installations(not pictured), use the two M3.5x25 mm

screws to attach the mounting bracket to the electrical box. Insert

the screws through the center openings in the left and right sides of

the mounting bracket.

Drywall Mounting

Mounting hardware is provided with the touch screen for drywall

installations without an electrical box. Using this hardware will ensure

that the bracket is completely flush with the touch screen to provide

maximum magnetic force.

To install the mounting bracket into drywall:

1. Using the inside of the mounting bracket as a template, cut a

2–1/8 x 3-5/8 in. (54 x 92 mm)hole into the drywall. Ensure the

template is level prior to cutting the hole.

2. Align the mounting bracket with the cutout and ensure it is level.

3. Use one of the anchors to make a center mark in the drywall through

the four 2-gang openings in the template. Refer to the image below

for the required mounting holes.

4. Screw the four anchors into the drywall using the center marks as a

reference.

5. Attach the mounting bracket to the anchors using the four 6-ABx

1in. screws as shown in the image below.

TSW-770Rand TSW-1070R QuickStart

7 in. and 10.1 in. Wall Mount Touch Screens, Crestron Home™ OS Version

Install the Security Bracket

(Optional)

The included security bracket may be attached to the touch screen to

prevent unauthorized removal after installation. The security bracket

snaps into place behind the mounting bracket so that the touch screen

cannot be removed without using the included release key.

Use the two M2 x 4 mm screws to attach the security bracket to the

touch screen rear housing as shown in the following illustration.

To remove the touch screen after installation, use the included release

key to push down on the security bracket release tabs as shown in the

following illustration while gently pulling the touch screen away from the

mounting bracket.

TSW-770Rand TSW-1070R QuickStart

7 in. and 10.1 in. Wall Mount Touch Screens, Crestron Home™ OS Version

Connect the Touch Screen

Route all necessary cables through the rear of the mounting bracket,

and then make connections to the side of the touch screen rear housing.

Observe the following when connecting the touch screen:

lPower and data connection is provided to the touch screen by a single

Ethernet cable. A Crestron PoE (Power over Ethernet) power supply,

such as the PWE-4803RU, or a PoE-capable network switch is

recommended (neither included).

lApply power after all connections have been made.

Mount the Touch Screen

After all connections have been made, push the touch screen gently into

the mounting bracket so that its rear housing is secured within the

center opening of the mounting bracket.

If the touch screen is not level after installation, pull it out of the

mounting bracket and loosen the screws holding the bracket into place.

This procedure allows the mounting bracket to be rotated slightly.

Once the mounting bracket has been repositioned, retighten the screws,

reinstall the touch screen into the bracket, and ensure that the touch

screen is now level.

NOTE:To clean or disinfect a touch screen display, use a soft, clean,

damp (not wet) cloth with any commercially available non-ammonia

glass cleaner or disinfectant cleaner. Bezels do not provide a complete

watertight seal, so apply cleaning solution to the cloth rather than the

surface of the touch screen. Wipe the touch screen clean and avoid

ingress of moisture beneath the bezels.

TSW-770Rand TSW-1070R QuickStart

7 in. and 10.1 in. Wall Mount Touch Screens, Crestron Home™ OS Version

Configure the Touch Screen

When power is applied for the first time, the touch screen boots to the

Crestron Home application setup screen. The touch screen may take up

to two minutes to boot.

Device settings for the touch screen may be configured using the built-in

setup screens or the web configuration interface. For more information

on configuring the touch screen, refer to the TSW-570, TSW-770, and

TSW-1070 Product Manual.

Access the Device Setup Screens

To access the built-in setup screens, place five fingers on the display and

hold for 15 seconds. The main Setup screen is displayed (TSW-1070

shown).

Use the setup screens to configure various settings for the touch screen,

including Ethernet setup, IP table setup, audio setup, display setup,

standby timeout,Wi-Fi network setup, and diagnostics.

NOTE:Time zone settings do not need to be configured on the touch

screen, as these settings will be pushed to the touch screen from the

control system running Crestron Home.

TSW-770Rand TSW-1070R QuickStart

7 in. and 10.1 in. Wall Mount Touch Screens, Crestron Home™ OS Version

Access the WebConfiguration Interface

The touch screen provides a web configuration interface that is used to

view and configure various touch screen settings. The interface can be

accessed using the touch screen IP address.

To access the web configuration interface using the touch screen IP

address:

1. Ensure that the touch screen is connected to the network.

2. Use the Device Discovery tool in Crestron Toolbox™ software to

discover the touch screen and its IP address on the network.

3. Enter the touch screen IPaddress into a web browser.

Create an AdminAccount

The first time the web configuration interface is accessed, a dialog box is

displayed asking the user to create an admin account. A similar message

is displayed when connecting to the device in Crestron Toolbox software

if an admin account has not already been created.

To create an admin account:

1. Enter a username and password for the admin account in the

appropriate text fields.

CAUTION:Do not lose the username and password for the admin

account, as the device must be reset to factory settings to regain

access.

2. Click OK. A dialog box is displayed stating that enabling

authentication will restart the web session.

3. Click Yes to confirm and restart. The username and password

created in step 1 must be entered to regain access to the web

configuration interface.

TSW-770Rand TSW-1070R QuickStart

7 in. and 10.1 in. Wall Mount Touch Screens, Crestron Home™ OS Version

Configure the Crestron Home App

The touch screen ships with the Crestron Home user control application

running out of the box. The application must be paired with an existing

Crestron Home system prior to use.

NOTE:A configured Crestron Home system is required for this

application. For more information, refer to the Crestron Home

OSProduct Manual.

To set up the Crestron Home user control application on the touch

screen:

1. From the Crestron Home application, tap Discover Home to discover

a Crestron Home system on the network, or tap Add Manually to

enter connection information for a Crestron Home system manually.

2. Complete any additional setup and configuration procedures as

described in the Crestron Home OSProduct Manual.

Visit the Product Pages

Scan the QR code to visit the product page.

TSW-770R

www.crestron.com/model/6511706

TSW-1070R

www.crestron.com/model/6511708

TSW-770Rand TSW-1070R QuickStart

7 in. and 10.1 in. Wall Mount Touch Screens, Crestron Home™ OS Version

Additional Information

Original Instructions

The U.S. English version of this document is the original instructions.

All other languages are a translation of the original instructions.

Regulatory Models:M201923002, M201923003

Crestron product development software is licensed to Crestron dealers and Crestron

Service Providers (CSPs) under a limited nonexclusive, nontransferable Software

Development Tools License Agreement. Crestron product operating system software is

licensed to Crestron dealers, CSPs, and end-users under a separate End-User License

Agreement. Both of these Agreements can be found on the Crestron website at

www.crestron.com/legal/software_license_agreement.

The product warranty can be found at www.crestron.com/warranty.

The specific patents that cover Crestron products are listed at

www.crestron.com/legal/patents.

Certain Crestron products contain open source software. For specific information, visit

www.crestron.com/opensource.

Crestron, the Crestron logo, Crestron Home, Crestron Toolbox, andRava are either

trademarks or registered trademarks of Crestron Electronics, Inc. in the United States

and/or other countries.Wi-Fi is either a trademark or registered trademark of Wi-Fi

Alliance in the United States and/or other countries. Other trademarks, registered

trademarks, and trade names may be used in this document to refer to either the

entities claiming the marks and names or their products. Crestron disclaims any

proprietary interest in the marks and names of others. Crestron is not responsible for

errors in typography or photography.

Doc ID 8897B

08/25/21

TSW-770Rand TSW-1070R QuickStart

7 in. and 10.1 in. Wall Mount Touch Screens, Crestron Home™ OS Version

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Panel táctil de Crestron

Crestron

Crestron STX-1700C Manual de usuario

Crestron

Crestron CT-1600 Guía de inicio rápido

Crestron

Crestron Isys i/O TPMC-4X Manual de usuario

Crestron

Crestron TSW-570 Manual de usuario

Crestron

Crestron TPMC-V12-WALL Manual de usuario

Crestron

Crestron TSW-560 Manual de usuario

Crestron

Crestron C2N-FT-TPS4 Manual de usuario

Crestron

Crestron TSW-560 Manual del propietario

Crestron

Crestron TS-1542 Manual de usuario

Crestron

Crestron 3200 Series Manual de usuario

Crestron

Crestron Isys TPS-5000 Manual de usuario

Crestron

Crestron CT-1550 Manual de usuario

Crestron

Crestron SmarTouch STX-1700CW Manual de usuario

Crestron

Crestron TPS-FPAR5000L Manual de usuario

Crestron

Crestron QM-FTCC-TPS4 Cómo utilizar

Crestron

Crestron TSW-70 Series Manual de usuario

Crestron

Crestron CT-3000 Manual de usuario

Crestron

Crestron MiniTouch MT-1000C Manual de usuario

Crestron

Crestron Isys i/O TPMC-15-CH-L Manual de usuario

Crestron

Crestron TSW-560 Manual del propietario

Crestron

Crestron TPS-FPAR4000L Manual de usuario

Crestron

Crestron TSW-730 Manual de usuario

Crestron

Crestron TSS-752 Manual de usuario

Crestron

Crestron ST-1550 Manual de usuario

Manuales populares de Panel táctil de otras marcas

FlowLine

FlowLine Data loop Manual de usuario

ALPEX

ALPEX AEx-8 P Series Manual de usuario

Ltech

Ltech E5S Manual de usuario

Harman

Harman AMX MODERO S MSD-701-L2 Manual de usuario

Acnodes

Acnodes PC 1150 Manual de usuario

AIS

AIS IP10IA99 series Manual de usuario

IBASE Technology

IBASE Technology ASTUT-152-RE1S Manual de usuario

YASKAWA

YASKAWA TP 610C Manual de usuario

B&R

B&R Power Panel C Series Manual de usuario

Beijer Electronics

Beijer Electronics X2 control Manual de usuario

AXIOMTEK

AXIOMTEK GOT321W-521 Manual de usuario

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Manual de usuario

Qomo

Qomo QIT1386 Manual de usuario

DFI

DFI KS104-CD Manual de usuario

AMX

AMX AXP-PPC Guía

Sartorius

Sartorius X3 PR 5410 Manual de usuario

AMX

AMX Modero X Series Manual de usuario

Advantech

Advantech TPC-30 Series Manual de usuario