Cooper Lighting AMETRIX SRR Manual de usuario

Universal

(4x)

assembly

Pan head screw

If possible, remove ceiling tile from grid to facilitate fixture

Fixture

installation.

bracket

Using cut out dimensions provided on page four(4), cut

#10-32 x3/8"

appropriate size opening in ceiling tile.

Ceiling tile

Insert fixture assembly into cut out in ceiling tile.

1. Using cut out dimensions provided on page four(4), cut

hole into dry wall and feed power wire to hole.

2. After removing fixture head, loosen #10-32 x3/8" Pan head

screws and remove cover plate closest to power feed.

3. Knock out appropriate hole for conduit and attach as shown

on page three(3).

4. Replace cover plate and secure with #10-32 x3/8" Pan head

screws and press fixture housing into hole in drywall.

(ceiling grid)

Pan head screws

Universal brackets

(4x)

3/8".

(2x)

Loosely reattach brackets to both sides of fixture housing.

2. Press brackets flush to ceiling tile and secure using #10-32 x

Replacing brackets on fixture housing

#10-32 x 3/8"

1. Prior to pushing fixture into hole in drywall, tie off fixture

housing to structure using saftey wire(by others) as show on

page three(3).

2. Gently push fixture housing into hole and tighten 1/4-20 x 1

1/2" Pan head screw from inside fixture housing to tighten

drywall bracket around drywall.

3. Connect appropriate wires from fixture head and ensure all

wires are properly matched.

4. Replace fixture head assembly on keyhole screws and

tighten.

1/4-20 x1 1/2"

Pan head screw Safety wires

(by others)

(4x)

Securing the fixture in drywall

Fixture housing

(drywall)

Wiring the fixture

Conduit from

Cover plate

power source.

(by others)

#10-32 x3/8"

Pan head screws

(2x)

Do not

work must meet local/national codes and be

: Before starting any work ensure

Vault w/ visor

These installation instructions are valid with the above Ametrix styles. mount fixtures vertically.

Roundel w/ visor

Installation Instructions

heet 2 of 4

Visor and Non-Visor

ADY071459 REV B (ECN80481)

Warning

that all sources of power are turned off. All

performed by a certified electrician.

C- croll w/ visor

Small, INDOOR

SRR

(Semi-Recessed, Remote ballast)

Securing fixture to ceiling tile

Semi-recessed fixtures shown without thermal protectors

Warning: Before starting any work ensure

that all sources of power are turned off. All

work must meet local/national codes and be

performed by a certified electrician. Do not

mount fixtures vertically.

Installation Instructions

Vault w/ visor C- croll w/ visor Roundel w/ visor

These installation instructions are valid with the above Ametrix styles.

heet 3 of 4

Small, INDOOR

SRR

(Semi-Recessed, Remote ballast)

Visor and Non-Visor

ADY071459 REV B (ECN80481)

Semi-recessed fixtures shown without thermal protectors

Securing the fixtures with safety wire

(both ceiling grid and drywall)

1. If applicable, replace ceiling tile with fixture secured back into ceiling. Remove adjacent tile from ceiling to facilitate wiring.

2. Depending on location of power source, loosen #10-32 x3/8" Pan head screws and remove appropriate cover plate and

knock out appropriate hole.

3. Using conduit fitting and washer, secure conduit to cover plate.

4. Attach appropriate wires and ensure all connections are properly matched.

5. Replace cover plate and secure with #10-32 x3/8" Pan head screws.

Choose appropriate cover plate

depending on location of power

source.

Ceiling surface

#10-32 x3/8"

Pan head screw

(2x)

Wiring the fixture

(both ceiling grid and drywall)

1. After securing fixture housing to ceiling structure using provided brackets, reinforce fixture using safety wire(by others).

2. Using all four tabs located on corners of fixture housing, tie off fixture to structure using safety wire(by others).

Cover plate

Conduit

(by others)

Conduit fitting

(by others)

Conduit Nut

(by others)

Safety wire

(by others)

Fixture housing

(lamps provided by others)

Cutout Dimensions In[mm]

Use only GE or Sylvania

CFL lamps

Semi-recessed fixtures shown without thermal protectors

Installation Instructions

Vault w/ visor C- croll w/ visor Roundel w/ visor

These installation instructions are valid with the above Ametrix styles

Warning: Before starting any work ensure

that all sources of power are turned off. All

work must meet local/national codes and be

performed by a certified electrician. Do not

mount fixtures vertically.

Small, INDOOR

SRR

(Semi-Recessed, Remote ballast)

Visor and Non-Visor

heet 4 of 4

ADY071459 REV B (ECN80481)

11 1

292.10

165.10

10 3/4" Fixture head size

12 3/4" Fixture head size

Lamping Size Chart

14 1

16 "

357.19

165.10

FIXTURE SIZE

(inches/ mm) WATTAGE # OF

LAMPS LAMP TYPE LAMP DESCRIPTION

3/4

/ 273.05 39 W 1 T6 Ceramic Metal Halide

3/4

/ 323.85 70 W 1 T6 Ceramic Metal Halide

3/4

/ 323.85 150 W 1 T6 Ceramic Metal Halide

3/4

/ 323.85 26 W 1 4-Pin Triple

Tube Compact Fluorescent

3/4

/ 323.85 32 W 1 4-Pin Triple

Tube Compact Fluorescent

3/4

/ 323.85 42 W 1 4-Pin Triple

Tube Compact Fluorescent

3/4

/ 273.05 100 W 1 T4 Halogen (Single Ended)

3/4

/ 323.85 150 W 1 T4 Halogen (Single Ended)

3/4

/ 323.85 250 W 1 T4 Halogen (Single Ended)

LAMP

(not to scale)

Este manual sirve para los siguientes modelos

Otros manuales de Luminaria de Cooper Lighting

Cooper Lighting

Cooper Lighting PM135cb Manual de usuario

Cooper Lighting

Cooper Lighting Neo-Ray 201-D/I Manual de usuario

Cooper Lighting

Cooper Lighting Neo-Ray 201-IW Manual de usuario

Cooper Lighting

Cooper Lighting GS Manual de usuario

Cooper Lighting

Cooper Lighting COMBOLIGHT MLU Series MLU314 Manual de usuario

Cooper Lighting

Cooper Lighting CHG Manual de usuario

Cooper Lighting

Cooper Lighting PM611cb Manual de usuario

Cooper Lighting

Cooper Lighting LUMARK M4 Manual de usuario

Cooper Lighting

Cooper Lighting Metalux 132 Manual de usuario

Cooper Lighting

Cooper Lighting METALUX 2AC 232T8 Manual de usuario

Cooper Lighting

Cooper Lighting Cobolight BX40 Manual de usuario

Cooper Lighting

Cooper Lighting Halo L4010 Manual de usuario

Cooper Lighting

Cooper Lighting RKD-140RS-48-10B Manual de usuario

Cooper Lighting

Cooper Lighting Neo-Ray 40-IP Manual de usuario

Cooper Lighting

Cooper Lighting Cobolight CR2111100 Manual de usuario

Cooper Lighting

Cooper Lighting Fail-Safe F-BAY 2HBHD SERIES Manual de usuario

Cooper Lighting

Cooper Lighting Combolight Combolight Recessed Lighting Manual de usuario

Cooper Lighting

Cooper Lighting Cobolight CR211135 Manual de usuario

Cooper Lighting

Cooper Lighting Halo L505WW6 Stasis Manual de usuario

Cooper Lighting

Cooper Lighting Halo L1760 Manual de usuario

Cooper Lighting

Cooper Lighting Metalux RDI SERIES Manual de usuario

Cooper Lighting

Cooper Lighting Combo Trimless Series LV-516-TR Manual de usuario

Cooper Lighting

Cooper Lighting Electronic Metal Halide MA6AR Manual de usuario

Cooper Lighting

Cooper Lighting Halo H2HALOLRG Manual de usuario

Manuales populares de Luminaria de otras marcas

Emos

Emos CLASSIC ZY1431T Manual de usuario

Westinghouse

Westinghouse Outdoor Lighting Fixture Manual de usuario

Hedler

Hedler C 12 silent Manual de usuario

Blizzard Lighting

Blizzard Lighting Puck: CSI Manual de usuario

Energetic Lighting

Energetic Lighting ELYSL-5004 Series Manual de usuario

Lightmaxx

Lightmaxx Shaft 5R Manual de usuario

Triarch

Triarch 31083 Manual de usuario

Philips

Philips 32614 Series Manual de usuario

IKEA

IKEA TIVED Manual de usuario

Lightolier

Lightolier LP200 Manual de usuario

Chauvet Professional

Chauvet Professional ROGUE R1 BEAM WASH Manual de usuario

Martin

Martin MAC 250 Krypton Manual de usuario

Stageline

Stageline ODW-2410RGBW Manual de usuario

Light Sky

Light Sky Tornado Series Manual de usuario

Lightolier

Lightolier Paralyte 2424 PLA2G9LS26U Manual de usuario

Lightolier

Lightolier Lytespan 83ED17S Manual de usuario

Lightolier

Lightolier Calculite CS8226 Manual de usuario

ArtFox

ArtFox Beam 15R extreme Manual de usuario